new file mode 100644
@@ -0,0 +1,41 @@
+# Minimal SD card image for the Warp board
+#
+# We mimic the .sdcard Freescale's image format for i.MX7S:
+# * the microSD card must have 1 kB free space at the beginning,
+# * U-Boot is dumped as is,
+# * a FAT partition at offset 8 MB is containing zImage and dtbs,
+# * a single root filesystem partition is required (Ext4 in this case).
+#
+
+image boot.vfat {
+ vfat {
+ files = {
+ "imx7s-warp.dtb",
+ "zImage"
+ }
+ }
+ size = 16M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.imx"
+ offset = 1024
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 8M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
new file mode 100755
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
new file mode 100644
@@ -0,0 +1,59 @@
+*****************
+Warp i.MX7S board
+*****************
+
+This file documents the Buildroot support for the Warp i.MX7S board.
+
+Build
+=====
+
+First, configure Buildroot for the Warp i.MX7S board:
+
+ make warp7_defconfig
+
+Build all components:
+
+ make
+
+You will find in output/images/ the following files:
+ - imx7s-warp.dtb
+ - rootfs.ext4
+ - rootfs.tar
+ - sdcard.img
+ - u-boot.imx
+ - zImage
+
+Create a bootable SD card
+=========================
+
+In the U-Boot prompt lauch:
+
+=> ums 0 mmc 0
+
+This will mount the eMMC content in the host PC as a mass storage device.
+
+To determine the device associated to the eMMC card have a look in the
+/proc/partitions file:
+
+ cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on the eMMC card. Launch the following
+command:
+
+sudo dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/warp7/genimage.cfg.
+
+Boot the Warp i.MX7S board
+==========================
+
+To boot your newly created system:
+- put a micro USB cable into the Debug USB Port and connect using a terminal
+ emulator at 115200 bps, 8n1;
+- power on the board.
+
+Enjoy!
new file mode 100644
@@ -0,0 +1,36 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/Freescale/linux-fslc.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="fe8d6628372fb1508df93e3851d197c61e9da0ec"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7s-warp"
+
+# U-Boot
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="warp7"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/Freescale/u-boot-fslc.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="ae973bc45dd60b9eeff2729b46498b58625fd5f2"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+
+# Filesystem
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/warp7/post-image.sh"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# required tools to create the eMMC image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y