diff mbox

[U-Boot,v2,1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg

Message ID 1470363072-6883-1-git-send-email-jh80.chung@samsung.com
State Accepted
Delegated to: Jaehoon Chung
Headers show

Commit Message

Jaehoon Chung Aug. 5, 2016, 2:11 a.m. UTC 
buswidth isn't used anywhere in sdhci_setup_cfg.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes for V2:
	- None

 drivers/mmc/msm_sdhci.c  | 4 ++--
 drivers/mmc/sdhci.c      | 4 ++--
 drivers/mmc/zynq_sdhci.c | 2 +-
 include/sdhci.h          | 3 +--
 4 files changed, 6 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index 70a8d96..e90a044 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -144,8 +144,8 @@  static int msm_sdc_probe(struct udevice *dev)
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 
 	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
-			      caps, 0, 0, host->version, host->quirks, 0);
+	ret = sdhci_setup_cfg(&plat->cfg, dev->name, caps,
+			0, 0, host->version, host->quirks, 0);
 	host->mmc = &plat->mmc;
 	if (ret)
 		return ret;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 4112223..c275314 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -511,7 +511,7 @@  static const struct mmc_ops sdhci_ops = {
 };
 #endif
 
-int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
+int sdhci_setup_cfg(struct mmc_config *cfg, const char *name,
 		    uint caps, u32 max_clk, u32 min_clk, uint version,
 		    uint quirks, uint host_caps)
 {
@@ -582,7 +582,7 @@  int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 	}
 #endif
 
-	if (sdhci_setup_cfg(&host->cfg, host->name, host->bus_width, caps,
+	if (sdhci_setup_cfg(&host->cfg, host->name, caps,
 			    max_clk, min_clk, SDHCI_GET_VERSION(host),
 			    host->quirks, host->host_caps)) {
 		printf("%s: Hardware doesn't specify base clock frequency\n",
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index bcd154a..69d6151 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -40,7 +40,7 @@  static int arasan_sdhci_probe(struct udevice *dev)
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 
 	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
+	ret = sdhci_setup_cfg(&plat->cfg, dev->name,
 			      caps, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ, host->version,
 			      host->quirks, 0);
diff --git a/include/sdhci.h b/include/sdhci.h
index c4d3b55..693ecc1 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -368,7 +368,6 @@  static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
  *
  * @cfg:	Configuration structure to fill in (generally &plat->mmc)
  * @name:	Device name (normally dev->name)
- * @buswidth:	Bus width (in bits, such as 4 or 8)
  * @caps:	Host capabilities (MMC_MODE_...)
  * @max_clk:	Maximum supported clock speed in HZ (0 for default)
  * @min_clk:	Minimum supported clock speed in HZ (0 for default)
@@ -377,7 +376,7 @@  static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
  * @quirks:	Quick flags (SDHCI_QUIRK_...)
  * @host_caps:	Additional host capabilities (0 if none)
  */
-int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
+int sdhci_setup_cfg(struct mmc_config *cfg, const char *name,
 		    uint caps, u32 max_clk, u32 min_clk, uint version,
 		    uint quirks, uint host_caps);