diff mbox

[U-Boot,v2,08/10] arm: dts: imx7: add Ricoh RN5T567 PMIC node

Message ID 20160802055024.13979-9-stefan@agner.ch
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Stefan Agner Aug. 2, 2016, 5:50 a.m. UTC 
From: Stefan Agner <stefan.agner@toradex.com>

Add device tree node for Ricoh RN5T567. Currently we do not need
the individual DC/DC converters or LDO's (and they are also not
yet supported by the driver).

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
---

 arch/arm/dts/imx7-colibri.dts | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Simon Glass Aug. 4, 2016, 1:16 a.m. UTC | #1 
On 1 August 2016 at 23:50, Stefan Agner <stefan@agner.ch> wrote:
> From: Stefan Agner <stefan.agner@toradex.com>
>
> Add device tree node for Ricoh RN5T567. Currently we do not need
> the individual DC/DC converters or LDO's (and they are also not
> yet supported by the driver).
>
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> ---
>
>  arch/arm/dts/imx7-colibri.dts | 5 +++++
>  1 file changed, 5 insertions(+)

Reviewed-by: Simon Glass <sjg@chromium.org>
diff mbox

Patch

diff --git a/arch/arm/dts/imx7-colibri.dts b/arch/arm/dts/imx7-colibri.dts
index f2da096..cbef5d5 100644
--- a/arch/arm/dts/imx7-colibri.dts
+++ b/arch/arm/dts/imx7-colibri.dts
@@ -24,6 +24,11 @@ 
 	sda-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 	scl-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	rn5t567@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+	};
 };
 
 &i2c4 {