@@ -25,6 +25,8 @@
#include <uapi/linux/mdio.h>
#include <linux/mdio.h>
#include <linux/usb/cdc.h>
+#include <linux/suspend.h>
+#include <linux/acpi.h>
/* Information for net-next */
#define NETNEXT_VERSION "08"
@@ -454,6 +456,11 @@
/* SRAM_IMPEDANCE */
#define RX_DRIVING_MASK 0x6000
+/* MAC PASSTHRU */
+#define AD_MASK 0xfee0
+#define EFUSE 0xcfdb
+#define PASS_THRU_MASK 0x1
+
enum rtl_register_content {
_1000bps = 0x10,
_100bps = 0x08,
@@ -1026,6 +1033,65 @@ out1:
return ret;
}
+/* Devices containing RTL8153-AD can support a persistent
+ * host system provided MAC address.
+ * Examples of this are Dell TB15 and Dell WD15 docks
+ */
+static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
+{
+ acpi_status status;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ int ret = -EINVAL;
+ u32 ocp_data;
+ unsigned char buf[6];
+
+ /* test for -AD variant of RTL8153 */
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ if ((ocp_data & AD_MASK) != 0x1000)
+ return -ENODEV;
+
+ /* test for MAC address pass-through bit */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+ if ((ocp_data & PASS_THRU_MASK) != 1)
+ return -ENODEV;
+
+ /* returns _AUXMAC_#AABBCCDDEEFF# */
+ status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
+ obj = (union acpi_object *)buffer.pointer;
+ if (!ACPI_SUCCESS(status))
+ return -ENODEV;
+ if (obj->type != ACPI_TYPE_BUFFER || obj->string.length != 0x17) {
+ netif_warn(tp, probe, tp->netdev,
+ "Invalid buffer when reading pass-thru MAC addr: "
+ "(%d, %d)\n",
+ obj->type, obj->string.length);
+ goto amacout;
+ }
+ if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 ||
+ strncmp(obj->string.pointer + 0x15, "#", 1) != 0) {
+ netif_warn(tp, probe, tp->netdev,
+ "Invalid header when reading pass-thru MAC addr\n");
+ goto amacout;
+ }
+ ret = hex2bin(buf, obj->string.pointer + 9, 6);
+ if (!(ret == 0 && is_valid_ether_addr(buf))) {
+ netif_warn(tp, probe, tp->netdev,
+ "Invalid MAC when reading pass-thru MAC addr: "
+ "%d, %pM\n", ret, buf);
+ ret = -EINVAL;
+ goto amacout;
+ }
+ memcpy(sa->sa_data, buf, 6);
+ ether_addr_copy(tp->netdev->dev_addr, sa->sa_data);
+ netif_info(tp, probe, tp->netdev,
+ "Using pass-thru MAC addr %pM\n", sa->sa_data);
+
+amacout:
+ kfree(obj);
+ return ret;
+}
+
static int set_ethernet_addr(struct r8152 *tp)
{
struct net_device *dev = tp->netdev;
@@ -1034,8 +1100,15 @@ static int set_ethernet_addr(struct r8152 *tp)
if (tp->version == RTL_VER_01)
ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
- else
- ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
+ else {
+ /* if this is not an RTL8153-AD, no eFuse mac pass thru set,
+ * or system doesn't provide valid _SB.AMAC this will be
+ * be expected to non-zero
+ */
+ ret = vendor_mac_passthru_addr_read(tp, &sa);
+ if (ret < 0)
+ ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
+ }
if (ret < 0) {
netif_err(tp, probe, dev, "Get ether addr fail\n");