@@ -1023,50 +1023,11 @@ endif
# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle.
+# the middle. This is handled by binman based on an image description in the
+# board's device tree.
ifneq ($(CONFIG_X86_RESET_VECTOR),)
rom: u-boot.rom FORCE
-IFDTOOL=$(objtree)/tools/ifdtool
-IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
-IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
-IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-IFDTOOL_FLAGS += -C
-
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-endif
-
-ifneq ($(CONFIG_HAVE_MRC),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-endif
-
-ifneq ($(CONFIG_HAVE_FSP),)
-IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_CMC),)
-IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_VGA_BIOS),)
-IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_REFCODE),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
-endif
-
-quiet_cmd_ifdtool = IFDTOOL $@
-cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-endif
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-cmd_ifdtool += mv u-boot.tmp $@
-
refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
$(call if_changed,copy)
@@ -1076,7 +1037,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
$(if $(CONFIG_HAVE_REFCODE),refcode.bin)
- $(call if_changed,ifdtool)
+ $(call if_changed,binman)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
u-boot-x86-16bit.bin: u-boot FORCE
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <config.h>
#include <dt-bindings/gpio/x86-gpio.h>
/include/ "skeleton.dtsi"
@@ -18,6 +19,57 @@
usb1 = &usb_1;
};
+#ifdef CONFIG_ROM_SIZE
+ binman {
+ filename = "u-boot.rom";
+ end-at-4gb;
+ sort-by-pos;
+ pad-byte = <0xff>;
+ size = <CONFIG_ROM_SIZE>;
+#ifdef CONFIG_HAVE_INTEL_ME
+ intel-descriptor {
+ };
+ intel-me {
+ };
+#endif
+ u-boot-with-ucode-ptr {
+ pos = <CONFIG_SYS_TEXT_BASE>;
+ };
+ u-boot-dtb-with-ucode {
+ };
+ u-boot-ucode {
+ align = <16>;
+ };
+#ifdef CONFIG_HAVE_MRC
+ intel-mrc {
+ pos = <CONFIG_X86_MRC_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_FSP
+ intel-fsp {
+ pos = <CONFIG_FSP_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_CMC
+ intel-cmc {
+ pos = <CONFIG_CMC_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_VGA_BIOS
+ intel-vga {
+ pos = <CONFIG_VGA_BIOS_ADDR>;
+ };
+#endif
+#ifdef CONFIG_HAVE_REFCODE
+ intel-refcode {
+ pos = <CONFIG_X86_REFCODE_ADDR>;
+ };
+#endif
+ x86-start16 {
+ pos = <CONFIG_SYS_X86_START16>;
+ };
+ };
+#endif
config {
silent_console = <0>;
};
Add an example usage of binman for an x86 board. This involves adding the image definition to the device tree and using it in the Makefile. The existing ifdtool features are no-longer needed. This is for example only. Signed-off-by: Simon Glass <sjg@chromium.org> --- Makefile | 45 +++------------------------------- arch/x86/dts/chromebook_link.dts | 52 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 42 deletions(-)