[U-Boot,v2] misc: Add simple driver for some Nuvoton NCT6102D devices

This simple driver provides some functions to control some of the
integrated devices. The watchdog is enabled per default. This driver
adds a function to disable the watchdog. Also the internal legacy
UART (io address 0x3f8/0x2f8) is enabled per default.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
---
v2:
- Added macros for the constants as suggested by Bin
- Changed macro names as suggested by Bin

 drivers/misc/Kconfig            |  8 ++++++
 drivers/misc/Makefile           |  1 +
 drivers/misc/nuvoton_nct6102d.c | 57 +++++++++++++++++++++++++++++++++++++++++
 include/nuvoton_nct6102d.h      | 34 ++++++++++++++++++++++++
 4 files changed, 100 insertions(+)
 create mode 100644 drivers/misc/nuvoton_nct6102d.c
 create mode 100644 include/nuvoton_nct6102d.h

On Mon, Jul 18, 2016 at 4:16 PM, Stefan Roese <sr@denx.de> wrote:
> This simple driver provides some functions to control some of the
> integrated devices. The watchdog is enabled per default. This driver
> adds a function to disable the watchdog. Also the internal legacy
> UART (io address 0x3f8/0x2f8) is enabled per default.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Bin Meng <bmeng.cn@gmail.com>
> Cc: Simon Glass <sjg@chromium.org>
> ---
> v2:
> - Added macros for the constants as suggested by Bin
> - Changed macro names as suggested by Bin
>
>  drivers/misc/Kconfig            |  8 ++++++
>  drivers/misc/Makefile           |  1 +
>  drivers/misc/nuvoton_nct6102d.c | 57 +++++++++++++++++++++++++++++++++++++++++
>  include/nuvoton_nct6102d.h      | 34 ++++++++++++++++++++++++
>  4 files changed, 100 insertions(+)
>  create mode 100644 drivers/misc/nuvoton_nct6102d.c
>  create mode 100644 include/nuvoton_nct6102d.h
>

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

One nits below:

> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 2373037..5d212a3 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -90,6 +90,14 @@ config MXC_OCOTP
>           Programmable memory pages that are stored on the some
>           Freescale i.MX processors.
>
> +config NUVOTON_NCT6102D
> +       bool "Enable Nuvoton NCT6102D Super I/O driver"
> +       help
> +         If you say Y here, you will get support for the Nuvoton
> +         NCT6102D Super I/O driver. This can be used to enable or
> +         disable the legacy UART, the watchdog or other devices
> +         in the Nuvoton Super IO chips on X86 platforms.
> +
>  config PWRSEQ
>         bool "Enable power-sequencing drivers"
>         depends on DM
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 066639b..1b0c7b6 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
>  obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
>  obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
>  obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
> +obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
>  obj-$(CONFIG_NS87308) += ns87308.o
>  obj-$(CONFIG_PDSP188x) += pdsp188x.o
>  obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
> diff --git a/drivers/misc/nuvoton_nct6102d.c b/drivers/misc/nuvoton_nct6102d.c
> new file mode 100644
> index 0000000..e81d178
> --- /dev/null
> +++ b/drivers/misc/nuvoton_nct6102d.c
> @@ -0,0 +1,57 @@
> +/*
> + * Copyright (C) 2016 Stefan Roese <sr@denx.de>
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <nuvoton_nct6102d.h>
> +#include <asm/io.h>
> +#include <asm/pnp_def.h>
> +
> +static void superio_outb(int reg, int val)
> +{
> +       outb(reg, NCT_EFER);
> +       outb(val, NCT_EFDR);
> +}
> +
> +static inline int superio_inb(int reg)
> +{
> +       outb(reg, NCT_EFER);
> +       return inb(NCT_EFDR);
> +}
> +
> +static int superio_enter(void)
> +{
> +       outb(NCT_ENTRY_KEY, NCT_EFER); /* Enter extended function mode */
> +       outb(NCT_ENTRY_KEY, NCT_EFER); /* Again according to manual */
> +
> +       return 0;
> +}
> +
> +static void superio_select(int ld)
> +{
> +       superio_outb(NCT_LD_SELECT_REG, ld);
> +}
> +
> +static void superio_exit(void)
> +{
> +       outb(NCT_EXIT_KEY, NCT_EFER); /* Leave extended function mode */
> +}
> +
> +/*
> + * The Nuvoton NCT6102D starts per default after reset with both,
> + * the internal watchdog and the internal legacy UART enabled. This
> + * code provides functions to disable the watchdog and the UART

nits: the comment mentions UART disable if needed. But it is really
does not do anything with UART. Suggest to remove it to avoid
confusion.

> + * if this is needed on platforms.
> + */
> +int nct6102d_wdt_disable(void)
> +{
> +       superio_enter();
> +       /* Select logical device for WDT */
> +       superio_select(NCT6102D_LD_WDT);
> +       superio_outb(NCT6102D_WDT_TIMEOUT, 0x00);
> +       superio_exit();
> +
> +       return 0;
> +}

[snip]

Regards,
Bin