[tpmdd-devel,1/2] tpm: define constants for tpm2 properties
diff mbox

Message ID 1468544838-9990-2-git-send-email-apronin@chromium.org
State New
Headers show

Commit Message

apronin@chromium.org July 15, 2016, 1:07 a.m. UTC
Change-Id: I47cb1793736781fbea93e5bf80b783e0ac9e8628
Signed-off-by: Andrey Pronin <apronin@chromium.org>
---
 drivers/char/tpm/tpm.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Jason Gunthorpe July 15, 2016, 3:08 a.m. UTC | #1
On Thu, Jul 14, 2016 at 06:07:17PM -0700, Andrey Pronin wrote:
> Change-Id: I47cb1793736781fbea93e5bf80b783e0ac9e8628

These commit messages are no good, generally for all your
patches. Drop the internal change-id and provide a suitable
description.

Do not add dead code to the kernel, so this patch should be in a
series that actually uses the new constants.

Jason

------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
Jarkko Sakkinen July 18, 2016, 6:58 p.m. UTC | #2
On Thu, Jul 14, 2016 at 06:07:17PM -0700, Andrey Pronin wrote:
> Change-Id: I47cb1793736781fbea93e5bf80b783e0ac9e8628
> Signed-off-by: Andrey Pronin <apronin@chromium.org>

I'm not going to apply this. The patch has no value. We only want to
have a subset of constants that are *used* by the kernel.

/Jarkko

> ---
>  drivers/char/tpm/tpm.h | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 8890df2..ad3b9d1 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -127,6 +127,32 @@ enum tpm2_capabilities {
>  	TPM2_CAP_TPM_PROPERTIES = 6,
>  };
>  
> +enum tpm2_properties {
> +	TPM2_PT_NONE			= 0,
> +	TPM2_PT_GROUP			= 0x100,
> +	TPM2_PT_FIXED			= TPM2_PT_GROUP,
> +	TPM2_PT_VAR			= TPM2_PT_GROUP * 2,
> +	TPM2_PT_PERMANENT		= TPM2_PT_VAR + 0,
> +	TPM2_PT_STARTUP_CLEAR		= TPM2_PT_VAR + 1,
> +};
> +
> +enum tpm2_attr_permanent {
> +	TPM2_ATTR_OWNER_AUTH_SET	= BIT(0),
> +	TPM2_ATTR_ENDORSEMENT_AUTH_SET	= BIT(1),
> +	TPM2_ATTR_LOCKOUT_AUTH_SET	= BIT(2),
> +	TPM2_ATTR_DISABLE_CLEAR		= BIT(8),
> +	TPM2_ATTR_IN_LOCKOUT		= BIT(9),
> +	TPM2_ATTR_TPM_GENERATED_EPS	= BIT(10),
> +};
> +
> +enum tpm2_attr_startup_clear {
> +	TPM2_ATTR_PH_ENABLE		= BIT(0),
> +	TPM2_ATTR_SH_ENABLE		= BIT(1),
> +	TPM2_ATTR_EH_ENABLE		= BIT(2),
> +	TPM2_ATTR_PH_ENABLE_NV		= BIT(3),
> +	TPM2_ATTR_ORDERLY = BIT(31),
> +};
> +
>  enum tpm2_startup_types {
>  	TPM2_SU_CLEAR	= 0x0000,
>  	TPM2_SU_STATE	= 0x0001,
> -- 
> 2.6.6
> 

------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev

Patch
diff mbox

diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 8890df2..ad3b9d1 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -127,6 +127,32 @@  enum tpm2_capabilities {
 	TPM2_CAP_TPM_PROPERTIES = 6,
 };
 
+enum tpm2_properties {
+	TPM2_PT_NONE			= 0,
+	TPM2_PT_GROUP			= 0x100,
+	TPM2_PT_FIXED			= TPM2_PT_GROUP,
+	TPM2_PT_VAR			= TPM2_PT_GROUP * 2,
+	TPM2_PT_PERMANENT		= TPM2_PT_VAR + 0,
+	TPM2_PT_STARTUP_CLEAR		= TPM2_PT_VAR + 1,
+};
+
+enum tpm2_attr_permanent {
+	TPM2_ATTR_OWNER_AUTH_SET	= BIT(0),
+	TPM2_ATTR_ENDORSEMENT_AUTH_SET	= BIT(1),
+	TPM2_ATTR_LOCKOUT_AUTH_SET	= BIT(2),
+	TPM2_ATTR_DISABLE_CLEAR		= BIT(8),
+	TPM2_ATTR_IN_LOCKOUT		= BIT(9),
+	TPM2_ATTR_TPM_GENERATED_EPS	= BIT(10),
+};
+
+enum tpm2_attr_startup_clear {
+	TPM2_ATTR_PH_ENABLE		= BIT(0),
+	TPM2_ATTR_SH_ENABLE		= BIT(1),
+	TPM2_ATTR_EH_ENABLE		= BIT(2),
+	TPM2_ATTR_PH_ENABLE_NV		= BIT(3),
+	TPM2_ATTR_ORDERLY = BIT(31),
+};
+
 enum tpm2_startup_types {
 	TPM2_SU_CLEAR	= 0x0000,
 	TPM2_SU_STATE	= 0x0001,