| Message ID | 1466624209-27432-3-git-send-email-lina.iyer@linaro.org |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
Hi, On Wed, Jun 22, 2016 at 01:36:37PM -0600, Lina Iyer wrote: > From: Axel Haslam <ahaslam+renesas@baylibre.com> > > Update DT bindings to describe idle states of PM domains. > > Cc: <devicetree@vger.kernel.org> > Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> > Signed-off-by: Lina Iyer <lina.iyer@linaro.org> > [Lina: Added state properties, removed state names, wakeup-latency, > added of_pm_genpd_init() API, pruned commit text] > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > [Ulf: Moved around code to make it compile properly, rebased on top of multiple state support] > --- > .../devicetree/bindings/power/power_domain.txt | 70 ++++++++++++++++++++++ > 1 file changed, 70 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt > index 025b5e7..41e8dda 100644 > --- a/Documentation/devicetree/bindings/power/power_domain.txt > +++ b/Documentation/devicetree/bindings/power/power_domain.txt > @@ -29,6 +29,43 @@ Optional properties: > specified by this binding. More details about power domain specifier are > available in the next section. > > +- power-states : A phandle of an idle-state that shall be soaked into a > + generic domain power state. It's somewhat unfortunate that this gives us two possible locations for idle state lists (under the /cpus node and in a pm-domains node), especially as it's not clear what would happen were a DT to have both. I would prefer that we extend the existing bindings such that states can refer to the power domains which they affect. > +==Power state== > + > +A PM domain power state describes an idle state of a domain and must be > +have the following properties - > + > + - entry-latency-us > + Usage: Not required if wakeup-latency-us is provided. > + Value type: <prop-encoded-array> > + Definition: u32 value representing worst case latency in > + microseconds required to enter the idle state. > + The exit-latency-us duration may be guaranteed > + only after entry-latency-us has passed. > + > + - exit-latency-us > + Usage: Not required if wakeup-latency-us is provided. > + Value type: <prop-encoded-array> > + Definition: u32 value representing worst case latency > + in microseconds required to exit the idle state. These are part of the existing idle state binding (Documentation/devicetree/bindings/arm/idle-states.txt), and I would prefer that we did not duplicate this nor come up with an independent set of idle state bindings. > + > + - residency-us: > + Usage: Optional > + Value type: <prop-encoded-array> > + Definition: A u32 value representing the time for which a > + domain must be idle in the state to reap power saving benefits > + of entering the state. This is "min-residency-us" per the existing bindings. > + > + - state-param: > + Usage: Optional > + Value type: <prop-encoded-array> > + Definition: A u32 value as defined by the state. May be used > + by the driver to hold state related u32 data. In the case of > + PSCI, an extended state-id for the domain may be encoded in > + this value. This is "arm,psci-suspend-param", per the existing bindings. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mark, On Thu, Jun 23 2016 at 11:35 -0600, Mark Rutland wrote: >Hi, > >On Wed, Jun 22, 2016 at 01:36:37PM -0600, Lina Iyer wrote: >> From: Axel Haslam <ahaslam+renesas@baylibre.com> >> >> Update DT bindings to describe idle states of PM domains. >> >> Cc: <devicetree@vger.kernel.org> >> Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> >> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> >> [Lina: Added state properties, removed state names, wakeup-latency, >> added of_pm_genpd_init() API, pruned commit text] >> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> >> [Ulf: Moved around code to make it compile properly, rebased on top of multiple state support] >> --- >> .../devicetree/bindings/power/power_domain.txt | 70 ++++++++++++++++++++++ >> 1 file changed, 70 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt >> index 025b5e7..41e8dda 100644 >> --- a/Documentation/devicetree/bindings/power/power_domain.txt >> +++ b/Documentation/devicetree/bindings/power/power_domain.txt >> @@ -29,6 +29,43 @@ Optional properties: >> specified by this binding. More details about power domain specifier are >> available in the next section. >> >> +- power-states : A phandle of an idle-state that shall be soaked into a >> + generic domain power state. > >It's somewhat unfortunate that this gives us two possible locations for >idle state lists (under the /cpus node and in a pm-domains node), >especially as it's not clear what would happen were a DT to have both. > >I would prefer that we extend the existing bindings such that states can >refer to the power domains which they affect. > I agree. The CPU idle states have become defined to be specific to CPUs. PM Domain idle states are generic for any type of domain. I am hoping at some point, we could converge and use the same idle state, but that would mean changing the CPU idle states to make it generic. At some point, during my development, I did use the arm,idle-state for domains as well, but the binding definitions were too restrictive for a generic PM domain. I would be willing to make the change to CPU idle states to make it generic and then we could just reference domain and CPU idle states using the same bindings. Are we okay with that, specifically, arm,psci-suspend-param? This binding is very restrictive in its description. What we pass to the platform driver upon choosing a domain state is very platform specific and therefore has to be generic in its description. Thanks, Lina >> +==Power state== >> + >> +A PM domain power state describes an idle state of a domain and must be >> +have the following properties - >> + >> + - entry-latency-us >> + Usage: Not required if wakeup-latency-us is provided. >> + Value type: <prop-encoded-array> >> + Definition: u32 value representing worst case latency in >> + microseconds required to enter the idle state. >> + The exit-latency-us duration may be guaranteed >> + only after entry-latency-us has passed. >> + >> + - exit-latency-us >> + Usage: Not required if wakeup-latency-us is provided. >> + Value type: <prop-encoded-array> >> + Definition: u32 value representing worst case latency >> + in microseconds required to exit the idle state. > >These are part of the existing idle state binding >(Documentation/devicetree/bindings/arm/idle-states.txt), and I would >prefer that we did not duplicate this nor come up with an independent >set of idle state bindings. > >> + >> + - residency-us: >> + Usage: Optional >> + Value type: <prop-encoded-array> >> + Definition: A u32 value representing the time for which a >> + domain must be idle in the state to reap power saving benefits >> + of entering the state. > >This is "min-residency-us" per the existing bindings. > >> + >> + - state-param: >> + Usage: Optional >> + Value type: <prop-encoded-array> >> + Definition: A u32 value as defined by the state. May be used >> + by the driver to hold state related u32 data. In the case of >> + PSCI, an extended state-id for the domain may be encoded in >> + this value. > >This is "arm,psci-suspend-param", per the existing bindings. > >Thanks, >Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 23, 2016 at 12:04:51PM -0600, Lina Iyer wrote: > Hi Mark, > > On Thu, Jun 23 2016 at 11:35 -0600, Mark Rutland wrote: > >Hi, > > > >On Wed, Jun 22, 2016 at 01:36:37PM -0600, Lina Iyer wrote: > >>From: Axel Haslam <ahaslam+renesas@baylibre.com> > >> > >>Update DT bindings to describe idle states of PM domains. > >> > >>Cc: <devicetree@vger.kernel.org> > >>Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> > >>Signed-off-by: Lina Iyer <lina.iyer@linaro.org> > >>[Lina: Added state properties, removed state names, wakeup-latency, > >>added of_pm_genpd_init() API, pruned commit text] > >>Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > >>[Ulf: Moved around code to make it compile properly, rebased on top of multiple state support] > >>--- > >> .../devicetree/bindings/power/power_domain.txt | 70 ++++++++++++++++++++++ > >> 1 file changed, 70 insertions(+) > >> > >>diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt > >>index 025b5e7..41e8dda 100644 > >>--- a/Documentation/devicetree/bindings/power/power_domain.txt > >>+++ b/Documentation/devicetree/bindings/power/power_domain.txt > >>@@ -29,6 +29,43 @@ Optional properties: > >> specified by this binding. More details about power domain specifier are > >> available in the next section. > >> > >>+- power-states : A phandle of an idle-state that shall be soaked into a > >>+ generic domain power state. > > > >It's somewhat unfortunate that this gives us two possible locations for > >idle state lists (under the /cpus node and in a pm-domains node), > >especially as it's not clear what would happen were a DT to have both. > > > >I would prefer that we extend the existing bindings such that states can > >refer to the power domains which they affect. > > > I agree. The CPU idle states have become defined to be specific to CPUs. > PM Domain idle states are generic for any type of domain. I am hoping at > some point, we could converge and use the same idle state, but that > would mean changing the CPU idle states to make it generic. Outside of CPU idling, I don't fully understand how this will be used, so it's not clear to me what would need to be made generic. Apologies for my ignorance there. > At some point, during my development, I did use the arm,idle-state for > domains as well, but the binding definitions were too restrictive for > a generic PM domain. > > I would be willing to make the change to CPU idle states to make it > generic and then we could just reference domain and CPU idle states > using the same bindings. Are we okay with that, specifically, > arm,psci-suspend-param? This binding is very restrictive in its > description. What we pass to the platform driver upon choosing a domain > state is very platform specific and therefore has to be generic in its > description. I was suggesting that for PSCI we should consistently us arm,psci-suspend-param, not that this should be used for all power domain state data. I imagine that mechanisms for powering down power domains will have varied requirements on data they require (and may require more than can be encoded in a u32), and I don't think it's best to try to force a single representation in the DT for that. It would be better to allow them to define the properties which they require. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 23 2016 at 12:19 -0600, Mark Rutland wrote: >On Thu, Jun 23, 2016 at 12:04:51PM -0600, Lina Iyer wrote: >> Hi Mark, >> >> On Thu, Jun 23 2016 at 11:35 -0600, Mark Rutland wrote: >> >Hi, >> > >> >On Wed, Jun 22, 2016 at 01:36:37PM -0600, Lina Iyer wrote: >> >>From: Axel Haslam <ahaslam+renesas@baylibre.com> >> >> >> >>Update DT bindings to describe idle states of PM domains. >> >> >> >>Cc: <devicetree@vger.kernel.org> >> >>Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> >> >>Signed-off-by: Lina Iyer <lina.iyer@linaro.org> >> >>[Lina: Added state properties, removed state names, wakeup-latency, >> >>added of_pm_genpd_init() API, pruned commit text] >> >>Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> >> >>[Ulf: Moved around code to make it compile properly, rebased on top of multiple state support] >> >>--- >> >> .../devicetree/bindings/power/power_domain.txt | 70 ++++++++++++++++++++++ >> >> 1 file changed, 70 insertions(+) >> >> >> >>diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt >> >>index 025b5e7..41e8dda 100644 >> >>--- a/Documentation/devicetree/bindings/power/power_domain.txt >> >>+++ b/Documentation/devicetree/bindings/power/power_domain.txt >> >>@@ -29,6 +29,43 @@ Optional properties: >> >> specified by this binding. More details about power domain specifier are >> >> available in the next section. >> >> >> >>+- power-states : A phandle of an idle-state that shall be soaked into a >> >>+ generic domain power state. >> > >> >It's somewhat unfortunate that this gives us two possible locations for >> >idle state lists (under the /cpus node and in a pm-domains node), >> >especially as it's not clear what would happen were a DT to have both. >> > >> >I would prefer that we extend the existing bindings such that states can >> >refer to the power domains which they affect. >> > >> I agree. The CPU idle states have become defined to be specific to CPUs. >> PM Domain idle states are generic for any type of domain. I am hoping at >> some point, we could converge and use the same idle state, but that >> would mean changing the CPU idle states to make it generic. > >Outside of CPU idling, I don't fully understand how this will be used, >so it's not clear to me what would need to be made generic. Apologies >for my ignorance there. > There may be non-PSCI ARM v7 CPU domains that may have domain controller drivers in the kernel. They would not hook into the ARM PSCI frameworks. It is still cpuidle though. >> At some point, during my development, I did use the arm,idle-state for >> domains as well, but the binding definitions were too restrictive for >> a generic PM domain. >> >> I would be willing to make the change to CPU idle states to make it >> generic and then we could just reference domain and CPU idle states >> using the same bindings. Are we okay with that, specifically, >> arm,psci-suspend-param? This binding is very restrictive in its >> description. What we pass to the platform driver upon choosing a domain >> state is very platform specific and therefore has to be generic in its >> description. > >I was suggesting that for PSCI we should consistently us >arm,psci-suspend-param, not that this should be used for all power >domain state data. > >I imagine that mechanisms for powering down power domains will have >varied requirements on data they require (and may require more than can >be encoded in a u32), and I don't think it's best to try to force a >single representation in the DT for that. It would be better to allow >them to define the properties which they require. > The only way to do that is to push the DT parsing to the platform drivers. In the case of CPU domains controlled by PSCI, we could use the arm,idle-states but any other generic domain, may need to define their own bindings and fill up the domain states before initiailizing the domain. While this approach pushes the onus on to the platform code, I am fine with it. Is that what you were thinking too? Thanks, Lina -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 025b5e7..41e8dda 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -29,6 +29,43 @@ Optional properties: specified by this binding. More details about power domain specifier are available in the next section. +- power-states : A phandle of an idle-state that shall be soaked into a + generic domain power state. + +==Power state== + +A PM domain power state describes an idle state of a domain and must be +have the following properties - + + - entry-latency-us + Usage: Not required if wakeup-latency-us is provided. + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency in + microseconds required to enter the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. + + - exit-latency-us + Usage: Not required if wakeup-latency-us is provided. + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency + in microseconds required to exit the idle state. + + - residency-us: + Usage: Optional + Value type: <prop-encoded-array> + Definition: A u32 value representing the time for which a + domain must be idle in the state to reap power saving benefits + of entering the state. + + - state-param: + Usage: Optional + Value type: <prop-encoded-array> + Definition: A u32 value as defined by the state. May be used + by the driver to hold state related u32 data. In the case of + PSCI, an extended state-id for the domain may be encoded in + this value. + Example: power: power-controller@12340000 { @@ -55,6 +92,39 @@ Example 2: #power-domain-cells = <1>; }; +Example 3: + + pm-domains { + a57_pd: a57_pd@ { + /* will have a57 platform ARM_PD_METHOD_OF_DECLARE*/ + compatible = "arm,pd","arm,cortex-a57"; + #power-domain-cells = <0>; + power-states = <&CLUSTER_SLEEP_0>; + }; + + a53_pd: a53_pd@ { + /* will have a a53 platform ARM_PD_METHOD_OF_DECLARE*/ + compatible = "arm,pd","arm,cortex-a53"; + #power-domain-cells = <0>; + power-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + + CLUSTER_SLEEP_0: power-state@0 { + entry-latency-us = <1000>; + exit-latency-us = <2000>; + residency-us = <10000>; + state-param = <0x1000010>; + }; + + CLUSTER_SLEEP_1: power-state@1 { + entry-latency-us = <5000>; + exit-latency-us = <5000>; + residency-us = <100000>; + state-param = <0x1000020>; + }; + }; + + The nodes above define two power controllers: 'parent' and 'child'. Domains created by the 'child' power controller are subdomains of '0' power domain provided by the 'parent' power controller.