| Message ID | 20160622082558.20935-7-acourbot@nvidia.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On Wed, Jun 22, 2016 at 05:25:58PM +0900, Alexandre Courbot wrote: > Add and document the enable-gpio property. Its behavior is similar to > the property of the same name found in GPIO regulator and fixed > regulator. Please submit patches using subject lines reflecting the style for the subsystem. This makes it easier for people to identify relevant patches. > +Optional properties: > +-------------------- > +- enable-gpio: GPIO to use to enable/disable the regulator > + The DT people are going to want this to be -gpios.
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index ed936f0f34f2..4f9dd27f52f5 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -38,13 +38,18 @@ NB: To be clear, if voltage-table is provided, then the device will be used in Voltage Table Mode. If no voltage-table is provided, then the device will be used in Continuous Voltage Mode. +Optional properties: +-------------------- +- enable-gpio: GPIO to use to enable/disable the regulator + Any property defined as part of the core regulator binding can also be used. (See: ../regulator/regulator.txt) -Continuous Voltage Example: +Continuous Voltage With Enable GPIO Example: pwm_regulator { compatible = "pwm-regulator; pwms = <&pwm1 0 8448 0>; + enable-gpio = <&gpio0 23 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1016000>; regulator-max-microvolt = <1114000>; regulator-name = "vdd_logic";
Add and document the enable-gpio property. Its behavior is similar to the property of the same name found in GPIO regulator and fixed regulator. Cc: devicetree@vger.kernel.org Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> --- Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)