diff mbox

[U-Boot] sunxi: Add defconfig for Olinuxino Lime 2 EMMC version

Message ID 1465961365-90707-1-git-send-email-manu@freebsd.org
State Changes Requested
Delegated to: Hans de Goede
Headers show

Commit Message

Emmanuel Vadot June 15, 2016, 3:29 a.m. UTC
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
---
 configs/A20-OLinuXino-Lime2-emmc_defconfig | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 configs/A20-OLinuXino-Lime2-emmc_defconfig

Comments

Ian Campbell June 15, 2016, 8:17 a.m. UTC | #1
On Wed, 2016-06-15 at 05:29 +0200, Emmanuel Vadot wrote:

Please include a short description of the board, in this case
explaining the distinction (and defconfig differences) from the non-
EMMC version would be useful.

Have a look at some of the previous patches which add defconfig (e.g.
those from Hans) for some examples of best practice.

> Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
> ---
>  configs/A20-OLinuXino-Lime2-emmc_defconfig | 21 +++++++++++++++++++++

This patch should also touch board/sunxi/MAINTAINERS, to add an entry
with your name for this board. 

> +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"

This file doesn't appear to be in the u-boot tree already so usually we
would import the upstream version as part of this patch.

In fact I'm not sure how this patch builds without it, we configure u-
boot itself via DM for at least some subsystems, which requires it to
be present a build time to be concatenated onto the basic image.

Ian.
diff mbox

Patch

diff --git a/configs/A20-OLinuXino-Lime2-emmc_defconfig b/configs/A20-OLinuXino-Lime2-emmc_defconfig
new file mode 100644
index 0000000..093c51f
--- /dev/null
+++ b/configs/A20-OLinuXino-Lime2-emmc_defconfig
@@ -0,0 +1,21 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=480
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC2_PINS="PC"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2k
+CONFIG_USB0_VBUS_PIN="PC17"
+CONFIG_USB0_VBUS_DET="PH5"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_USB_EHCI_HCD=y