[U-Boot,V3,1/3] serial: 16550: Add getfcr accessor

Add function which allows fetching the default FCR register setting
from platform data for DM , while retaining old behavior for non-DM
by returning UART_FCRVAL.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
---
V2: If CONFIG_DM_SERIAL and DEBUG_UART are enabled, the ns16550_getfcr()
    can be invoked with NULL plat data . Check for this case and return
    the default UART_FCRVAL then.
V3: It turns out that if DEBUG_UART is defined, $port points directly to
    hardware registers. Add additional ifdef to handle the case where
    debug uart is enabled with DM_SERIAL correctly.
---
 drivers/serial/ns16550.c | 24 +++++++++++++++++++++---
 include/ns16550.h        |  1 +
 2 files changed, 22 insertions(+), 3 deletions(-)

Hi Marek,

On 9 June 2016 at 19:04, Marek Vasut <marex@denx.de> wrote:
> Add function which allows fetching the default FCR register setting
> from platform data for DM , while retaining old behavior for non-DM
> by returning UART_FCRVAL.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Simon Glass <sjg@chromium.org>
> ---
> V2: If CONFIG_DM_SERIAL and DEBUG_UART are enabled, the ns16550_getfcr()
>     can be invoked with NULL plat data . Check for this case and return
>     the default UART_FCRVAL then.
> V3: It turns out that if DEBUG_UART is defined, $port points directly to
>     hardware registers. Add additional ifdef to handle the case where
>     debug uart is enabled with DM_SERIAL correctly.
> ---
>  drivers/serial/ns16550.c | 24 +++++++++++++++++++++---
>  include/ns16550.h        |  1 +
>  2 files changed, 22 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index c6cb3eb..728f338 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -120,6 +120,17 @@ static int ns16550_readb(NS16550_t port, int offset)
>         return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
>  }
>
> +static u32 ns16550_getfcr(NS16550_t port)
> +{
> +#ifdef CONFIG_DEBUG_UART_NS16550
> +       return UART_FCRVAL;
> +#else

Not here...

> +       struct ns16550_platdata *plat = port->plat;
> +
> +       return plat->fcr;
> +#endif
> +}
> +
>  /* We can clean these up once everything is moved to driver model */
>  #define serial_out(value, addr)        \
>         ns16550_writeb(com_port, \
> @@ -127,6 +138,11 @@ static int ns16550_readb(NS16550_t port, int offset)
>  #define serial_in(addr) \
>         ns16550_readb(com_port, \
>                 (unsigned char *)addr - (unsigned char *)com_port)
> +#else
> +static u32 ns16550_getfcr(NS16550_t port)
> +{
> +       return UART_FCRVAL;
> +}
>  #endif
>
>  int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
> @@ -170,7 +186,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
>         serial_out(0x7, &com_port->mdr1);       /* mode select reset TL16C750*/
>  #endif
>         serial_out(UART_MCRVAL, &com_port->mcr);
> -       serial_out(UART_FCRVAL, &com_port->fcr);
> +       serial_out(ns16550_getfcr(com_port), &com_port->fcr);
>         if (baud_divisor != -1)
>                 NS16550_setbrg(com_port, baud_divisor);
>  #if defined(CONFIG_OMAP) || \
> @@ -191,7 +207,7 @@ void NS16550_reinit(NS16550_t com_port, int baud_divisor)
>         serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
>         NS16550_setbrg(com_port, 0);
>         serial_out(UART_MCRVAL, &com_port->mcr);
> -       serial_out(UART_FCRVAL, &com_port->fcr);
> +       serial_out(ns16550_getfcr(com_port), &com_port->fcr);
>         NS16550_setbrg(com_port, baud_divisor);
>  }
>  #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
> @@ -262,7 +278,7 @@ static inline void _debug_uart_init(void)
>                                             CONFIG_BAUDRATE);
>         serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
>         serial_dout(&com_port->mcr, UART_MCRVAL);
> -       serial_dout(&com_port->fcr, UART_FCRVAL);
> +       serial_dout(&com_port->fcr, ns16550_getfcr(com_port));

Just put UART_FCRVAL here instead of your function call.

>
>         serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
>         serial_dout(&com_port->dll, baud_divisor & 0xff);
> @@ -405,6 +421,8 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
>                 return -EINVAL;
>         }
>
> +       plat->fcr = UART_FCRVAL;
> +
>         return 0;
>  }
>  #endif
> diff --git a/include/ns16550.h b/include/ns16550.h
> index 1311f4c..45fd68b 100644
> --- a/include/ns16550.h
> +++ b/include/ns16550.h
> @@ -57,6 +57,7 @@ struct ns16550_platdata {
>         int reg_shift;
>         int clock;
>         int reg_offset;
> +       u32 fcr;
>  };
>
>  struct udevice;
> --
> 2.7.0
>

Regards,
Simon