| Message ID | 1465306270-27076-4-git-send-email-lorenzo.pieralisi@arm.com |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi Lorenzo, I think this patch makes sense even independent of the rest of the series, one nit inline notwithstanding. Marek; I'm curious as to whether this could make the workaround in 722ec35f7 obsolete as well, or are all the drivers also bound super-early in the setup you had there? On 07/06/16 14:30, Lorenzo Pieralisi wrote: > Current bus notifier in ARM64 (__iommu_attach_notifier) > attempts to attach dma_ops to a device on BUS_NOTIFY_ADD_DEVICE > action notification. > > This causes issues on ACPI based systems, where PCI devices > can be added before the IOMMUs the devices are attached to > had a chance to be probed, causing failures on attempts to > attach dma_ops in that the domain for the respective IOMMU > may not be set-up yet by the time the bus notifier is run. > > Devices dma_ops do not require to be set-up till the matching > device drivers are probed. This means that instead of running > the notifier attaching dma_ops to devices (__iommu_attach_notifier) > on BUS_NOTIFY_ADD_DEVICE action, it can be run just before the > device driver is bound to the device in question (on action > BUS_NOTIFY_BIND_DRIVER) so that it is certain that its IOMMU > group and domain are set-up accordingly at the time the > notifier is triggered. > > This patch changes the notifier action upon which dma_ops > are attached to devices and defer it to driver binding time, > so that IOMMU devices have a chance to be probed and to register > their bus notifiers before the dma_ops attach sequence for a > device is actually carried out. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Robin Murphy <robin.murphy@arm.com> > --- > arch/arm64/mm/dma-mapping.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c > index c566ec8..79b0882 100644 > --- a/arch/arm64/mm/dma-mapping.c > +++ b/arch/arm64/mm/dma-mapping.c > @@ -848,7 +848,7 @@ static int __iommu_attach_notifier(struct notifier_block *nb, > { > struct iommu_dma_notifier_data *master, *tmp; > > - if (action != BUS_NOTIFY_ADD_DEVICE) > + if (action != BUS_NOTIFY_BIND_DRIVER) With this, you can also get rid of the priority setting and big fat explanatory comment in register_iommu_dma_ops_notifier(). Robin. > return 0; > > mutex_lock(&iommu_dma_notifier_lock); > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Robin, On Fri, Jun 17, 2016 at 10:27:22AM +0100, Robin Murphy wrote: > Hi Lorenzo, > > I think this patch makes sense even independent of the rest of the > series, one nit inline notwithstanding. Thanks. Yes I added it to this series since it is not strictly necessary (ie it does not fix anything) in the mainline, but it *is* necessary for this whole series to function when we boot through ACPI. I will send it out in a separate patch and fold changes you request below, it would be good to have some coverage for it before merging it. Thank you ! Lorenzo > Marek; I'm curious as to whether this could make the workaround in > 722ec35f7 obsolete as well, or are all the drivers also bound > super-early in the setup you had there? > > On 07/06/16 14:30, Lorenzo Pieralisi wrote: > >Current bus notifier in ARM64 (__iommu_attach_notifier) > >attempts to attach dma_ops to a device on BUS_NOTIFY_ADD_DEVICE > >action notification. > > > >This causes issues on ACPI based systems, where PCI devices > >can be added before the IOMMUs the devices are attached to > >had a chance to be probed, causing failures on attempts to > >attach dma_ops in that the domain for the respective IOMMU > >may not be set-up yet by the time the bus notifier is run. > > > >Devices dma_ops do not require to be set-up till the matching > >device drivers are probed. This means that instead of running > >the notifier attaching dma_ops to devices (__iommu_attach_notifier) > >on BUS_NOTIFY_ADD_DEVICE action, it can be run just before the > >device driver is bound to the device in question (on action > >BUS_NOTIFY_BIND_DRIVER) so that it is certain that its IOMMU > >group and domain are set-up accordingly at the time the > >notifier is triggered. > > > >This patch changes the notifier action upon which dma_ops > >are attached to devices and defer it to driver binding time, > >so that IOMMU devices have a chance to be probed and to register > >their bus notifiers before the dma_ops attach sequence for a > >device is actually carried out. > > > >Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > >Cc: Will Deacon <will.deacon@arm.com> > >Cc: Catalin Marinas <catalin.marinas@arm.com> > >Cc: Robin Murphy <robin.murphy@arm.com> > >--- > > arch/arm64/mm/dma-mapping.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > >diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c > >index c566ec8..79b0882 100644 > >--- a/arch/arm64/mm/dma-mapping.c > >+++ b/arch/arm64/mm/dma-mapping.c > >@@ -848,7 +848,7 @@ static int __iommu_attach_notifier(struct notifier_block *nb, > > { > > struct iommu_dma_notifier_data *master, *tmp; > > > >- if (action != BUS_NOTIFY_ADD_DEVICE) > >+ if (action != BUS_NOTIFY_BIND_DRIVER) > > With this, you can also get rid of the priority setting and big fat > explanatory comment in register_iommu_dma_ops_notifier(). > > Robin. > > > return 0; > > > > mutex_lock(&iommu_dma_notifier_lock); > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Robin, On 2016-06-17 11:27, Robin Murphy wrote: > Hi Lorenzo, > > I think this patch makes sense even independent of the rest of the > series, one nit inline notwithstanding. > > Marek; I'm curious as to whether this could make the workaround in > 722ec35f7 obsolete as well, or are all the drivers also bound > super-early in the setup you had there? Yes, this will solve that problem too. I will also hide some possible deferred probe issues, because the moment at which IOMMU is activated will be postponed. The only drawback with this approach is the fact that is drivers won't be allowed to do any dma-mapping operations on devices, which they don't own. This should not be a big issue, but this was the reason to setup IOMMU on device add instead of driver bind. While at it, please make sure that the case of failed client driver probe will be handled properly. IOMMU might do some operations while setting up and if the client driver fails to probe (for whatever reason, might be a deferred probe too), those operation has to be undone. However the current code of the driver core won't call any notifier (like BUS_NOTIFY_UNBOUND_DRIVER or whatever else) in such case. Long time ago I used BUS_NOTIFY_BIND_DRIVER based approach for my Exynos IOMMU patches and had to extend bus core with such patch: https://patchwork.kernel.org/patch/4678181/ to properly cleanup after failed client driver probe and avoid leaking resources. Please read the discussion, because some changes were requested to it. Best regards Marek Szyprowski, PhD Samsung R&D Institute Poland > > On 07/06/16 14:30, Lorenzo Pieralisi wrote: >> Current bus notifier in ARM64 (__iommu_attach_notifier) >> attempts to attach dma_ops to a device on BUS_NOTIFY_ADD_DEVICE >> action notification. >> >> This causes issues on ACPI based systems, where PCI devices >> can be added before the IOMMUs the devices are attached to >> had a chance to be probed, causing failures on attempts to >> attach dma_ops in that the domain for the respective IOMMU >> may not be set-up yet by the time the bus notifier is run. >> >> Devices dma_ops do not require to be set-up till the matching >> device drivers are probed. This means that instead of running >> the notifier attaching dma_ops to devices (__iommu_attach_notifier) >> on BUS_NOTIFY_ADD_DEVICE action, it can be run just before the >> device driver is bound to the device in question (on action >> BUS_NOTIFY_BIND_DRIVER) so that it is certain that its IOMMU >> group and domain are set-up accordingly at the time the >> notifier is triggered. >> >> This patch changes the notifier action upon which dma_ops >> are attached to devices and defer it to driver binding time, >> so that IOMMU devices have a chance to be probed and to register >> their bus notifiers before the dma_ops attach sequence for a >> device is actually carried out. >> >> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >> Cc: Will Deacon <will.deacon@arm.com> >> Cc: Catalin Marinas <catalin.marinas@arm.com> >> Cc: Robin Murphy <robin.murphy@arm.com> >> --- >> arch/arm64/mm/dma-mapping.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c >> index c566ec8..79b0882 100644 >> --- a/arch/arm64/mm/dma-mapping.c >> +++ b/arch/arm64/mm/dma-mapping.c >> @@ -848,7 +848,7 @@ static int __iommu_attach_notifier(struct >> notifier_block *nb, >> { >> struct iommu_dma_notifier_data *master, *tmp; >> >> - if (action != BUS_NOTIFY_ADD_DEVICE) >> + if (action != BUS_NOTIFY_BIND_DRIVER) > > With this, you can also get rid of the priority setting and big fat > explanatory comment in register_iommu_dma_ops_notifier(). > > Robin. > >> return 0; >> >> mutex_lock(&iommu_dma_notifier_lock); >> > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Marek, On Tue, Jun 21, 2016 at 09:53:20AM +0200, Marek Szyprowski wrote: > Hi Robin, > > > On 2016-06-17 11:27, Robin Murphy wrote: > >Hi Lorenzo, > > > >I think this patch makes sense even independent of the rest of the > >series, one nit inline notwithstanding. > > > >Marek; I'm curious as to whether this could make the workaround in > >722ec35f7 obsolete as well, or are all the drivers also bound > >super-early in the setup you had there? > > Yes, this will solve that problem too. I will also hide some possible > deferred probe issues, because the moment at which IOMMU is activated > will be postponed. The only drawback with this approach is the fact > that is drivers won't be allowed to do any dma-mapping operations on > devices, which they don't own. This should not be a big issue, but > this was the reason to setup IOMMU on device add instead of driver > bind. > > While at it, please make sure that the case of failed client driver > probe will be handled properly. IOMMU might do some operations while > setting up and if the client driver fails to probe (for whatever > reason, might be a deferred probe too), those operation has to be > undone. However the current code of the driver core won't call any > notifier (like BUS_NOTIFY_UNBOUND_DRIVER or whatever else) in such > case. Isn't Andy's commit 14b6257a5f3d enough ? Is that what you had in mind ? > Long time ago I used BUS_NOTIFY_BIND_DRIVER based approach for my > Exynos IOMMU patches and had to extend bus core with such patch: > https://patchwork.kernel.org/patch/4678181/ to properly cleanup > after failed client driver probe and avoid leaking resources. Please > read the discussion, because some changes were requested to it. It looks like commit 14b6257a5f3d ("device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification") does what you are requesting, please let me know if that's enough. I will revert the changes in 722ec35f7 and fold them in the new version along with Robin's suggestions. Thanks, Lorenzo > > > Best regards > Marek Szyprowski, PhD > Samsung R&D Institute Poland > > > > >On 07/06/16 14:30, Lorenzo Pieralisi wrote: > >>Current bus notifier in ARM64 (__iommu_attach_notifier) > >>attempts to attach dma_ops to a device on BUS_NOTIFY_ADD_DEVICE > >>action notification. > >> > >>This causes issues on ACPI based systems, where PCI devices > >>can be added before the IOMMUs the devices are attached to > >>had a chance to be probed, causing failures on attempts to > >>attach dma_ops in that the domain for the respective IOMMU > >>may not be set-up yet by the time the bus notifier is run. > >> > >>Devices dma_ops do not require to be set-up till the matching > >>device drivers are probed. This means that instead of running > >>the notifier attaching dma_ops to devices (__iommu_attach_notifier) > >>on BUS_NOTIFY_ADD_DEVICE action, it can be run just before the > >>device driver is bound to the device in question (on action > >>BUS_NOTIFY_BIND_DRIVER) so that it is certain that its IOMMU > >>group and domain are set-up accordingly at the time the > >>notifier is triggered. > >> > >>This patch changes the notifier action upon which dma_ops > >>are attached to devices and defer it to driver binding time, > >>so that IOMMU devices have a chance to be probed and to register > >>their bus notifiers before the dma_ops attach sequence for a > >>device is actually carried out. > >> > >>Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > >>Cc: Will Deacon <will.deacon@arm.com> > >>Cc: Catalin Marinas <catalin.marinas@arm.com> > >>Cc: Robin Murphy <robin.murphy@arm.com> > >>--- > >> arch/arm64/mm/dma-mapping.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >>diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c > >>index c566ec8..79b0882 100644 > >>--- a/arch/arm64/mm/dma-mapping.c > >>+++ b/arch/arm64/mm/dma-mapping.c > >>@@ -848,7 +848,7 @@ static int __iommu_attach_notifier(struct > >>notifier_block *nb, > >> { > >> struct iommu_dma_notifier_data *master, *tmp; > >> > >>- if (action != BUS_NOTIFY_ADD_DEVICE) > >>+ if (action != BUS_NOTIFY_BIND_DRIVER) > > > >With this, you can also get rid of the priority setting and big > >fat explanatory comment in register_iommu_dma_ops_notifier(). > > > >Robin. > > > >> return 0; > >> > >> mutex_lock(&iommu_dma_notifier_lock); > >> > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Lorenzo, On 2016-06-21 18:06, Lorenzo Pieralisi wrote: > Hi Marek, > > On Tue, Jun 21, 2016 at 09:53:20AM +0200, Marek Szyprowski wrote: >> Hi Robin, >> >> >> On 2016-06-17 11:27, Robin Murphy wrote: >>> Hi Lorenzo, >>> >>> I think this patch makes sense even independent of the rest of the >>> series, one nit inline notwithstanding. >>> >>> Marek; I'm curious as to whether this could make the workaround in >>> 722ec35f7 obsolete as well, or are all the drivers also bound >>> super-early in the setup you had there? >> Yes, this will solve that problem too. I will also hide some possible >> deferred probe issues, because the moment at which IOMMU is activated >> will be postponed. The only drawback with this approach is the fact >> that is drivers won't be allowed to do any dma-mapping operations on >> devices, which they don't own. This should not be a big issue, but >> this was the reason to setup IOMMU on device add instead of driver >> bind. >> >> While at it, please make sure that the case of failed client driver >> probe will be handled properly. IOMMU might do some operations while >> setting up and if the client driver fails to probe (for whatever >> reason, might be a deferred probe too), those operation has to be >> undone. However the current code of the driver core won't call any >> notifier (like BUS_NOTIFY_UNBOUND_DRIVER or whatever else) in such >> case. > Isn't Andy's commit 14b6257a5f3d enough ? Is that what you had in > mind ? > >> Long time ago I used BUS_NOTIFY_BIND_DRIVER based approach for my >> Exynos IOMMU patches and had to extend bus core with such patch: >> https://patchwork.kernel.org/patch/4678181/ to properly cleanup >> after failed client driver probe and avoid leaking resources. Please >> read the discussion, because some changes were requested to it. > It looks like commit 14b6257a5f3d ("device core: add > BUS_NOTIFY_DRIVER_NOT_BOUND notification") does what you > are requesting, please let me know if that's enough. Yes, that's exactly the change I needed that time. Nice to see that it finally landed in mainline. > I will revert the changes in 722ec35f7 and fold them in the > new version along with Robin's suggestions. Okay. Best regards
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index c566ec8..79b0882 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -848,7 +848,7 @@ static int __iommu_attach_notifier(struct notifier_block *nb, { struct iommu_dma_notifier_data *master, *tmp; - if (action != BUS_NOTIFY_ADD_DEVICE) + if (action != BUS_NOTIFY_BIND_DRIVER) return 0; mutex_lock(&iommu_dma_notifier_lock);
Current bus notifier in ARM64 (__iommu_attach_notifier) attempts to attach dma_ops to a device on BUS_NOTIFY_ADD_DEVICE action notification. This causes issues on ACPI based systems, where PCI devices can be added before the IOMMUs the devices are attached to had a chance to be probed, causing failures on attempts to attach dma_ops in that the domain for the respective IOMMU may not be set-up yet by the time the bus notifier is run. Devices dma_ops do not require to be set-up till the matching device drivers are probed. This means that instead of running the notifier attaching dma_ops to devices (__iommu_attach_notifier) on BUS_NOTIFY_ADD_DEVICE action, it can be run just before the device driver is bound to the device in question (on action BUS_NOTIFY_BIND_DRIVER) so that it is certain that its IOMMU group and domain are set-up accordingly at the time the notifier is triggered. This patch changes the notifier action upon which dma_ops are attached to devices and defer it to driver binding time, so that IOMMU devices have a chance to be probed and to register their bus notifiers before the dma_ops attach sequence for a device is actually carried out. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> --- arch/arm64/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)