| Message ID | 1465306270-27076-12-git-send-email-lorenzo.pieralisi@arm.com |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, Jun 07, 2016 at 02:31:06PM +0100, Lorenzo Pieralisi wrote: > In ACPI bases systems, in order to be able to create platform > devices and initialize them for arm-smmu-v3 components, the IORT > infrastructure requires ARM SMMU drivers to initialize a set of > operations that are used by the IORT kernel layer to configure platform > devices for ARM SMMU components in turn. > > This patch adds the IORT IOMMU configuration for the ARM SMMU v3 kernel > driver. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > Cc: Robin Murphy <robin.murphy@arm.com> > Cc: Joerg Roedel <joro@8bytes.org> > --- > drivers/iommu/arm-smmu-v3.c | 101 ++++++++++++++++++++++++++++++++++++++++++++ > include/linux/iort.h | 12 +++++- > 2 files changed, 112 insertions(+), 1 deletion(-) > > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c > index 90745a8..7acb6b5 100644 > --- a/drivers/iommu/arm-smmu-v3.c > +++ b/drivers/iommu/arm-smmu-v3.c > @@ -2687,6 +2687,107 @@ static int __init arm_smmu_of_init(struct device_node *np) > } > IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init); > > +#ifdef CONFIG_ACPI > +static int acpi_smmu_init(struct acpi_iort_node *node) > +{ > + iort_smmu_set_ops(node, &arm_smmu_ops, NULL); > + > + return 0; > +} > + > +static void acpi_smmu_register_irq(int hwirq, const char *name, > + struct resource *res) > +{ > + int irq = acpi_register_gsi(NULL, hwirq, ACPI_EDGE_SENSITIVE, > + ACPI_ACTIVE_HIGH); > + > + if (irq < 0) { > + pr_err("could not register gsi hwirq %d name [%s]\n", hwirq, > + name); > + return; > + } > + > + res->start = irq; > + res->end = irq; > + res->flags = IORESOURCE_IRQ; > + res->name = name; > +} > + > +static int arm_smmu_count_resources(struct acpi_iort_node *node) > +{ > + struct acpi_iort_smmu_v3 *smmu; > + /* Always present mem resource */ > + int num_res = 1; > + > + /* Retrieve SMMUv3 specific data */ > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > + > + if (smmu->event_gsiv) > + num_res++; > + > + if (smmu->pri_gsiv) > + num_res++; > + > + if (smmu->gerr_gsiv) > + num_res++; > + > + if (smmu->sync_gsiv) > + num_res++; > + > + return num_res; > +} > + > +static void arm_smmu_init_resources(struct resource *res, > + struct acpi_iort_node *node) > +{ > + struct acpi_iort_smmu_v3 *smmu; > + int num_res = 0; > + > + /* Retrieve SMMUv3 specific data */ > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > + > + res[num_res].start = smmu->base_address; > + res[num_res].end = smmu->base_address + SZ_128K - 1; > + res[num_res].flags = IORESOURCE_MEM; > + > + num_res++; > + > + if (smmu->event_gsiv) > + acpi_smmu_register_irq(smmu->event_gsiv, "eventq", > + &res[num_res++]); > + > + if (smmu->pri_gsiv) > + acpi_smmu_register_irq(smmu->pri_gsiv, "priq", > + &res[num_res++]); > + > + if (smmu->gerr_gsiv) > + acpi_smmu_register_irq(smmu->gerr_gsiv, "gerror", > + &res[num_res++]); > + > + if (smmu->sync_gsiv) > + acpi_smmu_register_irq(smmu->sync_gsiv, "cmdq-sync", > + &res[num_res++]); > +} > + > +static bool arm_smmu_is_coherent(struct acpi_iort_node *node) > +{ > + struct acpi_iort_smmu_v3 *smmu; > + > + /* Retrieve SMMUv3 specific data */ > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > + > + return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE; > +} > + > +const struct iort_iommu_config iort_arm_smmu_v3_cfg = { > + .name = "arm-smmu-v3", > + .iommu_init = acpi_smmu_init, > + .iommu_is_coherent = arm_smmu_is_coherent, > + .iommu_count_resources = arm_smmu_count_resources, > + .iommu_init_resources = arm_smmu_init_resources > +}; > +#endif > + > MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations"); > MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>"); > MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/iort.h b/include/linux/iort.h > index ced3054..5dcfa09 100644 > --- a/include/linux/iort.h > +++ b/include/linux/iort.h > @@ -55,7 +55,17 @@ struct iort_iommu_config { > static inline const struct iort_iommu_config * > iort_get_iommu_config(struct acpi_iort_node *node) > { > - return NULL; > + switch (node->type) { > +#if IS_ENABLED(CONFIG_ARM_SMMU_V3) > + case ACPI_IORT_NODE_SMMU_V3: { > + extern const struct iort_iommu_config iort_arm_smmu_v3_cfg; > + > + return &iort_arm_smmu_v3_cfg; > + } > +#endif Oh, yuck! I really don't like this mixture of SMMU driver code and IORT code over two files using a global structure of largely stateless function pointers. I think you have two options: (1) Move this all into iort.c (my preference) (2) Introduce something like SMMU_ACPI_DECLARE which allows drivers to register a callback if they're matched in the IORT. that at least keeps internal data in one place, rather than spreading it around. Cheers, Will -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jun 14, 2016 at 07:39:39PM +0100, Will Deacon wrote: > On Tue, Jun 07, 2016 at 02:31:06PM +0100, Lorenzo Pieralisi wrote: > > In ACPI bases systems, in order to be able to create platform > > devices and initialize them for arm-smmu-v3 components, the IORT > > infrastructure requires ARM SMMU drivers to initialize a set of > > operations that are used by the IORT kernel layer to configure platform > > devices for ARM SMMU components in turn. > > > > This patch adds the IORT IOMMU configuration for the ARM SMMU v3 kernel > > driver. > > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Cc: Will Deacon <will.deacon@arm.com> > > Cc: Robin Murphy <robin.murphy@arm.com> > > Cc: Joerg Roedel <joro@8bytes.org> > > --- > > drivers/iommu/arm-smmu-v3.c | 101 ++++++++++++++++++++++++++++++++++++++++++++ > > include/linux/iort.h | 12 +++++- > > 2 files changed, 112 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c > > index 90745a8..7acb6b5 100644 > > --- a/drivers/iommu/arm-smmu-v3.c > > +++ b/drivers/iommu/arm-smmu-v3.c > > @@ -2687,6 +2687,107 @@ static int __init arm_smmu_of_init(struct device_node *np) > > } > > IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init); > > > > +#ifdef CONFIG_ACPI > > +static int acpi_smmu_init(struct acpi_iort_node *node) > > +{ > > + iort_smmu_set_ops(node, &arm_smmu_ops, NULL); > > + > > + return 0; > > +} > > + > > +static void acpi_smmu_register_irq(int hwirq, const char *name, > > + struct resource *res) > > +{ > > + int irq = acpi_register_gsi(NULL, hwirq, ACPI_EDGE_SENSITIVE, > > + ACPI_ACTIVE_HIGH); > > + > > + if (irq < 0) { > > + pr_err("could not register gsi hwirq %d name [%s]\n", hwirq, > > + name); > > + return; > > + } > > + > > + res->start = irq; > > + res->end = irq; > > + res->flags = IORESOURCE_IRQ; > > + res->name = name; > > +} > > + > > +static int arm_smmu_count_resources(struct acpi_iort_node *node) > > +{ > > + struct acpi_iort_smmu_v3 *smmu; > > + /* Always present mem resource */ > > + int num_res = 1; > > + > > + /* Retrieve SMMUv3 specific data */ > > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > > + > > + if (smmu->event_gsiv) > > + num_res++; > > + > > + if (smmu->pri_gsiv) > > + num_res++; > > + > > + if (smmu->gerr_gsiv) > > + num_res++; > > + > > + if (smmu->sync_gsiv) > > + num_res++; > > + > > + return num_res; > > +} > > + > > +static void arm_smmu_init_resources(struct resource *res, > > + struct acpi_iort_node *node) > > +{ > > + struct acpi_iort_smmu_v3 *smmu; > > + int num_res = 0; > > + > > + /* Retrieve SMMUv3 specific data */ > > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > > + > > + res[num_res].start = smmu->base_address; > > + res[num_res].end = smmu->base_address + SZ_128K - 1; > > + res[num_res].flags = IORESOURCE_MEM; > > + > > + num_res++; > > + > > + if (smmu->event_gsiv) > > + acpi_smmu_register_irq(smmu->event_gsiv, "eventq", > > + &res[num_res++]); > > + > > + if (smmu->pri_gsiv) > > + acpi_smmu_register_irq(smmu->pri_gsiv, "priq", > > + &res[num_res++]); > > + > > + if (smmu->gerr_gsiv) > > + acpi_smmu_register_irq(smmu->gerr_gsiv, "gerror", > > + &res[num_res++]); > > + > > + if (smmu->sync_gsiv) > > + acpi_smmu_register_irq(smmu->sync_gsiv, "cmdq-sync", > > + &res[num_res++]); > > +} > > + > > +static bool arm_smmu_is_coherent(struct acpi_iort_node *node) > > +{ > > + struct acpi_iort_smmu_v3 *smmu; > > + > > + /* Retrieve SMMUv3 specific data */ > > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > > + > > + return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE; > > +} > > + > > +const struct iort_iommu_config iort_arm_smmu_v3_cfg = { > > + .name = "arm-smmu-v3", > > + .iommu_init = acpi_smmu_init, > > + .iommu_is_coherent = arm_smmu_is_coherent, > > + .iommu_count_resources = arm_smmu_count_resources, > > + .iommu_init_resources = arm_smmu_init_resources > > +}; > > +#endif > > + > > MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations"); > > MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>"); > > MODULE_LICENSE("GPL v2"); > > diff --git a/include/linux/iort.h b/include/linux/iort.h > > index ced3054..5dcfa09 100644 > > --- a/include/linux/iort.h > > +++ b/include/linux/iort.h > > @@ -55,7 +55,17 @@ struct iort_iommu_config { > > static inline const struct iort_iommu_config * > > iort_get_iommu_config(struct acpi_iort_node *node) > > { > > - return NULL; > > + switch (node->type) { > > +#if IS_ENABLED(CONFIG_ARM_SMMU_V3) > > + case ACPI_IORT_NODE_SMMU_V3: { > > + extern const struct iort_iommu_config iort_arm_smmu_v3_cfg; > > + > > + return &iort_arm_smmu_v3_cfg; > > + } > > +#endif > > Oh, yuck! I really don't like this mixture of SMMU driver code and IORT > code over two files using a global structure of largely stateless function > pointers. > > I think you have two options: > > (1) Move this all into iort.c (my preference) > (2) Introduce something like SMMU_ACPI_DECLARE which allows drivers to > register a callback if they're matched in the IORT. > > that at least keeps internal data in one place, rather than spreading it > around. (1) is possible for most of the function pointers. Problem is that iort.c has to know ARM SMMU v3 driver internals (driver name for platform device matching and IRQ resources names - I wanted to keep the ARM SMMU v3 probing routine as FW agnostic as possible), it is obviously doable but I have to make sure I keep them in sync. We still need (2) to have an IOMMU_OF_DECLARE() equivalent (ie to make sure that we can carry out the of_xlate() equivalent when devices are probed), I did not want to add a linker script section for two components (ARM SMMUv1/v2 and v3) but that's doable too, I will make changes for v3. Thanks for having a look ! Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 90745a8..7acb6b5 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -2687,6 +2687,107 @@ static int __init arm_smmu_of_init(struct device_node *np) } IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init); +#ifdef CONFIG_ACPI +static int acpi_smmu_init(struct acpi_iort_node *node) +{ + iort_smmu_set_ops(node, &arm_smmu_ops, NULL); + + return 0; +} + +static void acpi_smmu_register_irq(int hwirq, const char *name, + struct resource *res) +{ + int irq = acpi_register_gsi(NULL, hwirq, ACPI_EDGE_SENSITIVE, + ACPI_ACTIVE_HIGH); + + if (irq < 0) { + pr_err("could not register gsi hwirq %d name [%s]\n", hwirq, + name); + return; + } + + res->start = irq; + res->end = irq; + res->flags = IORESOURCE_IRQ; + res->name = name; +} + +static int arm_smmu_count_resources(struct acpi_iort_node *node) +{ + struct acpi_iort_smmu_v3 *smmu; + /* Always present mem resource */ + int num_res = 1; + + /* Retrieve SMMUv3 specific data */ + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; + + if (smmu->event_gsiv) + num_res++; + + if (smmu->pri_gsiv) + num_res++; + + if (smmu->gerr_gsiv) + num_res++; + + if (smmu->sync_gsiv) + num_res++; + + return num_res; +} + +static void arm_smmu_init_resources(struct resource *res, + struct acpi_iort_node *node) +{ + struct acpi_iort_smmu_v3 *smmu; + int num_res = 0; + + /* Retrieve SMMUv3 specific data */ + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; + + res[num_res].start = smmu->base_address; + res[num_res].end = smmu->base_address + SZ_128K - 1; + res[num_res].flags = IORESOURCE_MEM; + + num_res++; + + if (smmu->event_gsiv) + acpi_smmu_register_irq(smmu->event_gsiv, "eventq", + &res[num_res++]); + + if (smmu->pri_gsiv) + acpi_smmu_register_irq(smmu->pri_gsiv, "priq", + &res[num_res++]); + + if (smmu->gerr_gsiv) + acpi_smmu_register_irq(smmu->gerr_gsiv, "gerror", + &res[num_res++]); + + if (smmu->sync_gsiv) + acpi_smmu_register_irq(smmu->sync_gsiv, "cmdq-sync", + &res[num_res++]); +} + +static bool arm_smmu_is_coherent(struct acpi_iort_node *node) +{ + struct acpi_iort_smmu_v3 *smmu; + + /* Retrieve SMMUv3 specific data */ + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; + + return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE; +} + +const struct iort_iommu_config iort_arm_smmu_v3_cfg = { + .name = "arm-smmu-v3", + .iommu_init = acpi_smmu_init, + .iommu_is_coherent = arm_smmu_is_coherent, + .iommu_count_resources = arm_smmu_count_resources, + .iommu_init_resources = arm_smmu_init_resources +}; +#endif + MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations"); MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>"); MODULE_LICENSE("GPL v2"); diff --git a/include/linux/iort.h b/include/linux/iort.h index ced3054..5dcfa09 100644 --- a/include/linux/iort.h +++ b/include/linux/iort.h @@ -55,7 +55,17 @@ struct iort_iommu_config { static inline const struct iort_iommu_config * iort_get_iommu_config(struct acpi_iort_node *node) { - return NULL; + switch (node->type) { +#if IS_ENABLED(CONFIG_ARM_SMMU_V3) + case ACPI_IORT_NODE_SMMU_V3: { + extern const struct iort_iommu_config iort_arm_smmu_v3_cfg; + + return &iort_arm_smmu_v3_cfg; + } +#endif + default: + return NULL; + } } #endif /* __IORT_H__ */
In ACPI bases systems, in order to be able to create platform devices and initialize them for arm-smmu-v3 components, the IORT infrastructure requires ARM SMMU drivers to initialize a set of operations that are used by the IORT kernel layer to configure platform devices for ARM SMMU components in turn. This patch adds the IORT IOMMU configuration for the ARM SMMU v3 kernel driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> --- drivers/iommu/arm-smmu-v3.c | 101 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/iort.h | 12 +++++- 2 files changed, 112 insertions(+), 1 deletion(-)