[2/9] pinctrl: baytrail: make it explicitly non-modular
diff mbox

Message ID 1465267388-17884-3-git-send-email-paul.gortmaker@windriver.com
State New
Headers show

Commit Message

Paul Gortmaker June 7, 2016, 2:43 a.m. UTC
The Kconfig currently controlling compilation of this code is:

config PINCTRL_BAYTRAIL
        bool "Intel Baytrail GPIO pin control"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_init() was already not in use in this driver, we don't
have any concerns with init ordering changes here.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 25 ++++---------------------
 1 file changed, 4 insertions(+), 21 deletions(-)

Comments

Mika Westerberg June 9, 2016, 2:10 p.m. UTC | #1
On Mon, Jun 06, 2016 at 10:43:01PM -0400, Paul Gortmaker wrote:
> The Kconfig currently controlling compilation of this code is:
> 
> config PINCTRL_BAYTRAIL
>         bool "Intel Baytrail GPIO pin control"
> 
> ...meaning that it currently is not being built as a module by anyone.
> 
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
> 
> We explicitly disallow a driver unbind, since that doesn't have a
> sensible use case anyway, and it allows us to drop the ".remove"
> code for non-modular drivers.
> 
> Since module_init() was already not in use in this driver, we don't
> have any concerns with init ordering changes here.
> 
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
> 
> We also delete the MODULE_LICENSE tag etc. since all that information
> is already contained at the top of the file in the comments.
> 
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>

Yeah, probably good thing to do. No objections from me.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij June 13, 2016, 6:26 a.m. UTC | #2
On Tue, Jun 7, 2016 at 4:43 AM, Paul Gortmaker
<paul.gortmaker@windriver.com> wrote:

> The Kconfig currently controlling compilation of this code is:
>
> config PINCTRL_BAYTRAIL
>         bool "Intel Baytrail GPIO pin control"
>
> ...meaning that it currently is not being built as a module by anyone.
>
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
>
> We explicitly disallow a driver unbind, since that doesn't have a
> sensible use case anyway, and it allows us to drop the ".remove"
> code for non-modular drivers.
>
> Since module_init() was already not in use in this driver, we don't
> have any concerns with init ordering changes here.
>
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
>
> We also delete the MODULE_LICENSE tag etc. since all that information
> is already contained at the top of the file in the comments.
>
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Patch applied with Mika's ACK.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 677a811b3a6f..b2df03e9e431 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -15,7 +15,6 @@ 
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/bitops.h>
@@ -1822,17 +1821,6 @@  static int byt_pinctrl_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int byt_pinctrl_remove(struct platform_device *pdev)
-{
-	struct byt_gpio *vg = platform_get_drvdata(pdev);
-
-	pm_runtime_disable(&pdev->dev);
-	gpiochip_remove(&vg->chip);
-	pinctrl_unregister(vg->pctl_dev);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int byt_gpio_suspend(struct device *dev)
 {
@@ -1930,10 +1918,11 @@  static const struct dev_pm_ops byt_gpio_pm_ops = {
 
 static struct platform_driver byt_gpio_driver = {
 	.probe          = byt_pinctrl_probe,
-	.remove         = byt_pinctrl_remove,
 	.driver         = {
-		.name   = "byt_gpio",
-		.pm	= &byt_gpio_pm_ops,
+		.name			= "byt_gpio",
+		.pm			= &byt_gpio_pm_ops,
+		.suppress_bind_attrs	= true,
+
 		.acpi_match_table = ACPI_PTR(byt_gpio_acpi_match),
 	},
 };
@@ -1943,9 +1932,3 @@  static int __init byt_gpio_init(void)
 	return platform_driver_register(&byt_gpio_driver);
 }
 subsys_initcall(byt_gpio_init);
-
-static void __exit byt_gpio_exit(void)
-{
-	platform_driver_unregister(&byt_gpio_driver);
-}
-module_exit(byt_gpio_exit);