@@ -828,6 +828,7 @@ config PATA_SAMSUNG_CF
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
depends on ISA && EXPERIMENTAL
+ select PATA_LEGACY
help
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
@@ -89,7 +89,6 @@ obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
-obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
obj-$(CONFIG_PATA_PXA) += pata_pxa.o
@@ -60,6 +60,7 @@ enum board_ids {
board_ahci,
board_ahci_ign_iferr,
board_ahci_nosntf,
+ board_ahci_yes_fbs,
/* board IDs for specific chipsets in alphabetical order */
board_ahci_mcp65,
@@ -132,6 +133,14 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_yes_fbs] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_FBS),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
/* by chipsets */
[board_ahci_mcp65] =
{
@@ -362,6 +371,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
+ { PCI_DEVICE(0x1b4b, 0x9123),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9128 */
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
@@ -209,6 +209,7 @@ enum {
link offline */
AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */
+ AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */
/* ap->flags bits */
@@ -430,6 +430,12 @@ void ahci_save_initial_config(struct device *dev,
cap &= ~HOST_CAP_SNTF;
}
+ if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
+ dev_printk(KERN_INFO, dev,
+ "controller can do FBS, turning on CAP_FBS\n");
+ cap |= HOST_CAP_FBS;
+ }
+
if (force_port_map && port_map != force_port_map) {
dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, force_port_map);
@@ -2036,9 +2042,15 @@ static int ahci_port_start(struct ata_port *ap)
u32 cmd = readl(port_mmio + PORT_CMD);
if (cmd & PORT_CMD_FBSCP)
pp->fbs_supported = true;
- else
+ else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
+ dev_printk(KERN_INFO, dev,
+ "port %d can do FBS, forcing FBSCP\n",
+ ap->port_no);
+ pp->fbs_supported = true;
+ } else
dev_printk(KERN_WARNING, dev,
- "The port is not capable of FBS\n");
+ "port %d is not capable of FBS\n",
+ ap->port_no);
}
if (pp->fbs_supported) {
@@ -5111,15 +5111,18 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
qc->flags |= ATA_QCFLAG_ACTIVE;
ap->qc_active |= 1 << qc->tag;
- /* We guarantee to LLDs that they will have at least one
+ /*
+ * We guarantee to LLDs that they will have at least one
* non-zero sg if the command is a data command.
*/
- BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes));
+ if (WARN_ON_ONCE(ata_is_data(prot) &&
+ (!qc->sg || !qc->n_elem || !qc->nbytes)))
+ goto sys_err;
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
(ap->flags & ATA_FLAG_PIO_DMA)))
if (ata_sg_setup(qc))
- goto sg_err;
+ goto sys_err;
/* if device is sleeping, schedule reset and abort the link */
if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
@@ -5136,7 +5139,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
goto err;
return;
-sg_err:
+sys_err:
qc->err_mask |= AC_ERR_SYSTEM;
err:
ata_qc_complete(qc);
@@ -2735,10 +2735,6 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- /* see ata_dma_blacklisted() */
- BUG_ON((ap->flags & ATA_FLAG_PIO_POLLING) &&
- qc->tf.protocol == ATAPI_PROT_DMA);
-
/* defer PIO handling to sff_qc_issue */
if (!ata_is_dma(qc->tf.protocol))
return ata_sff_qc_issue(qc);
@@ -121,14 +121,8 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m
if (pair) {
struct ata_timing tp;
-
ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
- if (pair->dma_mode) {
- ata_timing_compute(pair, pair->dma_mode,
- &tp, T, 0);
- ata_timing_merge(&tp, &t, &t, ATA_TIMING_SETUP);
- }
}
}
@@ -44,6 +44,9 @@
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
* opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A
*
+ * Support for the Winbond 83759A when operating in advanced mode.
+ * Multichip mode is not currently supported.
+ *
* Use the autospeed and pio_mask options with:
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
* Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
@@ -135,12 +138,18 @@ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
static int qdi; /* Set to probe QDI controllers */
-static int winbond; /* Set to probe Winbond controllers,
- give I/O port if non standard */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
+#ifdef PATA_WINBOND_VLB_MODULE
+static int winbond = 1; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+#else
+static int winbond; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+#endif
+
/**
* legacy_probe_add - Add interface to probe list
* @port: Controller port
@@ -1297,6 +1306,7 @@ MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for legacy ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_winbond");
module_param(probe_all, int, 0);
module_param(autospeed, int, 0);
@@ -1305,6 +1315,7 @@ module_param(ht6560b, int, 0);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
module_param(qdi, int, 0);
+module_param(winbond, int, 0);
module_param(pio_mask, int, 0);
module_param(iordy_mask, int, 0);
deleted file mode 100644
@@ -1,282 +0,0 @@
-/*
- * pata_winbond.c - Winbond VLB ATA controllers
- * (C) 2006 Red Hat
- *
- * Support for the Winbond 83759A when operating in advanced mode.
- * Multichip mode is not currently supported.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-
-#define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.3"
-
-#define NR_HOST 4 /* Two winbond controllers, two channels each */
-
-struct winbond_data {
- unsigned long config;
- struct platform_device *platform_dev;
-};
-
-static struct ata_host *winbond_host[NR_HOST];
-static struct winbond_data winbond_data[NR_HOST];
-static int nr_winbond_host;
-
-#ifdef MODULE
-static int probe_winbond = 1;
-#else
-static int probe_winbond;
-#endif
-
-static DEFINE_SPINLOCK(winbond_lock);
-
-static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
-{
- unsigned long flags;
- spin_lock_irqsave(&winbond_lock, flags);
- outb(reg, port + 0x01);
- outb(val, port + 0x02);
- spin_unlock_irqrestore(&winbond_lock, flags);
-}
-
-static u8 winbond_readcfg(unsigned long port, u8 reg)
-{
- u8 val;
-
- unsigned long flags;
- spin_lock_irqsave(&winbond_lock, flags);
- outb(reg, port + 0x01);
- val = inb(port + 0x02);
- spin_unlock_irqrestore(&winbond_lock, flags);
-
- return val;
-}
-
-static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct winbond_data *winbond = ap->host->private_data;
- int active, recovery;
- u8 reg;
- int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
-
- reg = winbond_readcfg(winbond->config, 0x81);
-
- /* Get the timing data in cycles */
- if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
- ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- else
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
- recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
- timing = (active << 4) | recovery;
- winbond_writecfg(winbond->config, timing, reg);
-
- /* Load the setup timing */
-
- reg = 0x35;
- if (adev->class != ATA_DEV_ATA)
- reg |= 0x08; /* FIFO off */
- if (!ata_pio_need_iordy(adev))
- reg |= 0x02; /* IORDY off */
- reg |= (clamp_val(t.setup, 0, 3) << 6);
- winbond_writecfg(winbond->config, timing + 1, reg);
-}
-
-
-static unsigned int winbond_data_xfer(struct ata_device *dev,
- unsigned char *buf, unsigned int buflen, int rw)
-{
- struct ata_port *ap = dev->link->ap;
- int slop = buflen & 3;
-
- if (ata_id_has_dword_io(dev->id)) {
- if (rw == READ)
- ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-
- if (unlikely(slop)) {
- __le32 pad;
- if (rw == READ) {
- pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
- memcpy(buf + buflen - slop, &pad, slop);
- } else {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- }
- buflen += 4 - slop;
- }
- } else
- buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
-
- return buflen;
-}
-
-static struct scsi_host_template winbond_sht = {
- ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations winbond_port_ops = {
- .inherits = &ata_sff_port_ops,
- .sff_data_xfer = winbond_data_xfer,
- .cable_detect = ata_cable_40wire,
- .set_piomode = winbond_set_piomode,
-};
-
-/**
- * winbond_init_one - attach a winbond interface
- * @type: Type to display
- * @io: I/O port start
- * @irq: interrupt line
- * @fast: True if on a > 33Mhz VLB
- *
- * Register a VLB bus IDE interface. Such interfaces are PIO and we
- * assume do not support IRQ sharing.
- */
-
-static __init int winbond_init_one(unsigned long port)
-{
- struct platform_device *pdev;
- u8 reg;
- int i, rc;
-
- reg = winbond_readcfg(port, 0x81);
- reg |= 0x80; /* jumpered mode off */
- winbond_writecfg(port, 0x81, reg);
- reg = winbond_readcfg(port, 0x83);
- reg |= 0xF0; /* local control */
- winbond_writecfg(port, 0x83, reg);
- reg = winbond_readcfg(port, 0x85);
- reg |= 0xF0; /* programmable timing */
- winbond_writecfg(port, 0x85, reg);
-
- reg = winbond_readcfg(port, 0x81);
-
- if (!(reg & 0x03)) /* Disabled */
- return -ENODEV;
-
- for (i = 0; i < 2 ; i ++) {
- unsigned long cmd_port = 0x1F0 - (0x80 * i);
- unsigned long ctl_port = cmd_port + 0x206;
- struct ata_host *host;
- struct ata_port *ap;
- void __iomem *cmd_addr, *ctl_addr;
-
- if (!(reg & (1 << i)))
- continue;
-
- pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- rc = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- goto err_unregister;
- ap = host->ports[0];
-
- rc = -ENOMEM;
- cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
- ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
- if (!cmd_addr || !ctl_addr)
- goto err_unregister;
-
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
-
- ap->ops = &winbond_port_ops;
- ap->pio_mask = ATA_PIO4;
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- ap->ioaddr.cmd_addr = cmd_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_sff_std_ports(&ap->ioaddr);
-
- /* hook in a private data structure per channel */
- host->private_data = &winbond_data[nr_winbond_host];
- winbond_data[nr_winbond_host].config = port;
- winbond_data[nr_winbond_host].platform_dev = pdev;
-
- /* activate */
- rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
- &winbond_sht);
- if (rc)
- goto err_unregister;
-
- winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
- }
-
- return 0;
-
- err_unregister:
- platform_device_unregister(pdev);
- return rc;
-}
-
-/**
- * winbond_init - attach winbond interfaces
- *
- * Attach winbond IDE interfaces by scanning the ports it may occupy.
- */
-
-static __init int winbond_init(void)
-{
- static const unsigned long config[2] = { 0x130, 0x1B0 };
-
- int ct = 0;
- int i;
-
- if (probe_winbond == 0)
- return -ENODEV;
-
- /*
- * Check both base addresses
- */
-
- for (i = 0; i < 2; i++) {
- if (probe_winbond & (1<<i)) {
- int ret = 0;
- unsigned long port = config[i];
-
- if (request_region(port, 2, "pata_winbond")) {
- ret = winbond_init_one(port);
- if (ret <= 0)
- release_region(port, 2);
- else ct+= ret;
- }
- }
- }
- if (ct != 0)
- return 0;
- return -ENODEV;
-}
-
-static __exit void winbond_exit(void)
-{
- int i;
-
- for (i = 0; i < nr_winbond_host; i++) {
- ata_host_detach(winbond_host[i]);
- release_region(winbond_data[i].config, 2);
- platform_device_unregister(winbond_data[i].platform_dev);
- }
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(winbond_init);
-module_exit(winbond_exit);
-
-module_param(probe_winbond, int, 0);
-
@@ -1459,7 +1459,7 @@ static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
{
struct scatterlist *sg = qc->sg;
struct ata_port *ap = qc->ap;
- u32 dma_chan;
+ int dma_chan;
struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
int err;
@@ -1898,19 +1898,25 @@ static void mv_bmdma_start(struct ata_queued_cmd *qc)
* LOCKING:
* Inherited from caller.
*/
-static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+static void mv_bmdma_stop_ap(struct ata_port *ap)
{
- struct ata_port *ap = qc->ap;
void __iomem *port_mmio = mv_ap_base(ap);
u32 cmd;
/* clear start/stop bit */
cmd = readl(port_mmio + BMDMA_CMD);
- cmd &= ~ATA_DMA_START;
- writelfl(cmd, port_mmio + BMDMA_CMD);
+ if (cmd & ATA_DMA_START) {
+ cmd &= ~ATA_DMA_START;
+ writelfl(cmd, port_mmio + BMDMA_CMD);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+ }
+}
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_dma_pause(ap);
+static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ mv_bmdma_stop_ap(qc->ap);
}
/**
@@ -1934,8 +1940,21 @@ static u8 mv_bmdma_status(struct ata_port *ap)
reg = readl(port_mmio + BMDMA_STATUS);
if (reg & ATA_DMA_ACTIVE)
status = ATA_DMA_ACTIVE;
- else
+ else if (reg & ATA_DMA_ERR)
status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR;
+ else {
+ /*
+ * Just because DMA_ACTIVE is 0 (DMA completed),
+ * this does _not_ mean the device is "done".
+ * So we should not yet be signalling ATA_DMA_INTR
+ * in some cases. Eg. DSM/TRIM, and perhaps others.
+ */
+ mv_bmdma_stop_ap(ap);
+ if (ioread8(ap->ioaddr.altstatus_addr) & ATA_BUSY)
+ status = 0;
+ else
+ status = ATA_DMA_INTR;
+ }
return status;
}
@@ -1995,6 +2014,9 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
switch (tf->protocol) {
case ATA_PROT_DMA:
+ if (tf->command == ATA_CMD_DSM)
+ return;
+ /* fall-thru */
case ATA_PROT_NCQ:
break; /* continue below */
case ATA_PROT_PIO:
@@ -2094,6 +2116,8 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
if ((tf->protocol != ATA_PROT_DMA) &&
(tf->protocol != ATA_PROT_NCQ))
return;
+ if (tf->command == ATA_CMD_DSM)
+ return; /* use bmdma for this */
/* Fill in Gen IIE command request block */
if (!(tf->flags & ATA_TFLAG_WRITE))
@@ -2289,6 +2313,12 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
+ if (qc->tf.command == ATA_CMD_DSM) {
+ if (!ap->ops->bmdma_setup) /* no bmdma on GEN_I */
+ return AC_ERR_OTHER;
+ break; /* use bmdma for this */
+ }
+ /* fall thru */
case ATA_PROT_NCQ:
mv_start_edma(ap, port_mmio, pp, qc->tf.protocol);
pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
Note that the pata_winbond change really is a fix. See http://marc.info/?t=128084945700004&r=1&w=2 for details and original bug report from Dan Carpenter. The change updates pata_legacy to support winbond. The rest are mostly tiny patches as befitting -rc. sata_mv apparently needs special handling for the DSM (aka TRIM) command, in addition to needing an its-broken fix in libata-core. Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus to receive the following updates: drivers/ata/Kconfig | 1 + drivers/ata/Makefile | 1 - drivers/ata/ahci.c | 11 ++ drivers/ata/ahci.h | 1 + drivers/ata/libahci.c | 16 ++- drivers/ata/libata-core.c | 11 +- drivers/ata/libata-sff.c | 4 - drivers/ata/pata_cmd64x.c | 6 - drivers/ata/pata_legacy.c | 15 ++- drivers/ata/pata_winbond.c | 282 ------------------------------------------ drivers/ata/sata_dwc_460ex.c | 2 +- drivers/ata/sata_mv.c | 44 ++++++- 12 files changed, 85 insertions(+), 309 deletions(-) delete mode 100644 drivers/ata/pata_winbond.c Bartlomiej Zolnierkiewicz (1): libata: remove no longer needed pata_winbond driver Dan Carpenter (1): [libata] sata_dwc_460ex: signdness bug Mark Lord (2): sata_mv: fix broken DSM/TRIM support (v2) libata-sff: remove harmful BUG_ON from ata_bmdma_qc_issue Tejun Heo (3): pata_cmd64x: revert commit d62f5576 ahci: add HFLAG_YES_FBS and apply it to 88SE9128 libata: be less of a drama queen on empty data commands -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html