mbox

[U-Boot] Please pull u-boot-fsl-qoriq master

Message ID 57448F27.9010508@nxp.com
State Not Applicable
Headers show

Pull-request

git://git.denx.de/u-boot-fsl-qoriq.git master

Message

York Sun May 24, 2016, 5:28 p.m. UTC 
Tom,

The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:

  Prepare v2016.05 (2016-05-16 10:40:32 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fsl-qoriq.git master

for you to fetch changes up to bc323b3fa7cbf1008f02d342c0505231961b5fa6:

  armv8: ls1043ardb: enable scsi command and pcie to sata converter (2016-05-18
08:52:42 -0700)

----------------------------------------------------------------
Alex Porosanu (4):
      armv8/fdt: add fixup_crypto_node
      arch/arm: add SEC JR0 offset
      arch/arm, arch/powerpc: add # of SEC engines on the SOC
      crypto/fsl: add support for multiple SEC engines initialization

Alison Wang (2):
      armv8: fsl-layerscape: Remove unnecessary flushing dcache
      arm: ls1021a: Enable CONFIG_OF_LIBFDT and CONFIG_FIT in defconfig

Aneesh Bansal (1):
      armv8: ls2080: enable sec_init in U-Boot

Po Liu (1):
      armv8: ls1043ardb: enable scsi command and pcie to sata converter

Prabhakar Kushwaha (2):
      armv8: ls2080a: Update MAINTAINERS file
      armv8: ls2080a: update eth prime

Qianyu Gong (7):
      armv8/ls1043ardb: fix the limitation of using 'cpld reset'
      armv8: ls1043a: copy kernel from QSPI when booting with QSPI enabled
      armv8: ls1043a: remove redundant code in board files
      armv8: ls1043ardb: fix types of variables
      armv8: fsl-layerscape: spl: remove duplicate init_early_memctl_regs()
      armv8: fsl-layerscape: spl: fix the macro name of MMC mode
      armv7: ls102xa: spl: fix the macro name of MMC mode

Shaohui Xie (1):
      armv8: ls1043ardb: invert irq pin polarity for AQR105 PHY

Shengzhou Liu (5):
      armv8/ls1043: Add workaround for DDR erratum A-008850
      drivers/ddr/fsl: update workaround for erratum A-008511
      driver/ddr/fsl: Add workaround for erratum A-009801
      armv8/ls2080ardb: Update DDR timing to support more UDIMMs
      driver/ddr/fsl: Add workaround for erratum A-010165

Vincent Siles (2):
      arm: Fix SCFG ICID reg addresses
      arm: uniform usage of u32 in ls102x caam config

Yuan Yao (5):
      spi: fsl_qspi: Fix issues on arm64
      spi: fsl_qspi: Assign AMBA mem according CS num in dts
      spi: fsl_qspi: Enable Spansion S25FS-S family flashes
      sf: Disable 4-KB erase command for SPANSION S25FS-S family
      armv8/ls1043a: update the node for QSPI support

 arch/arm/cpu/armv7/ls102xa/spl.c                   |    2 +-
 arch/arm/cpu/armv8/fsl-layerscape/cpu.c            |    3 -
 arch/arm/cpu/armv8/fsl-layerscape/fdt.c            |   19 ++
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            |   36 +++
 arch/arm/cpu/armv8/fsl-layerscape/spl.c            |    5 +-
 arch/arm/dts/fsl-ls1043a.dtsi                      |    5 +-
 arch/arm/include/asm/arch-fsl-layerscape/config.h  |    5 +
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |    9 +-
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |    8 +-
 arch/arm/include/asm/arch-ls102xa/config.h         |    2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    9 +-
 arch/arm/include/asm/arch-mx7/imx-regs.h           |   11 +-
 arch/powerpc/cpu/mpc85xx/cpu_init.c                |    9 +
 arch/powerpc/include/asm/config_mpc85xx.h          |    6 +
 board/freescale/c29xpcie/c29xpcie.c                |    2 +-
 board/freescale/common/ls102xa_stream_id.c         |    6 +-
 board/freescale/ls1043aqds/ddr.c                   |    1 +
 board/freescale/ls1043aqds/ddr.h                   |    2 +
 board/freescale/ls1043aqds/ls1043aqds.c            |   12 -
 board/freescale/ls1043ardb/cpld.c                  |   26 +-
 board/freescale/ls1043ardb/cpld.h                  |    1 +
 board/freescale/ls1043ardb/ddr.c                   |    2 +
 board/freescale/ls1043ardb/ddr.h                   |    3 +
 board/freescale/ls1043ardb/ls1043ardb.c            |   21 +-
 board/freescale/ls2080aqds/MAINTAINERS             |    2 +-
 board/freescale/ls2080ardb/MAINTAINERS             |    2 +-
 board/freescale/ls2080ardb/ddr.h                   |    6 +-
 configs/ls1021aqds_ddr4_nor_defconfig              |    3 +
 configs/ls1021aqds_ddr4_nor_lpuart_defconfig       |    3 +
 configs/ls1021aqds_nand_defconfig                  |    2 +
 configs/ls1021aqds_nor_SECURE_BOOT_defconfig       |    2 +
 configs/ls1021aqds_nor_defconfig                   |    3 +
 configs/ls1021aqds_nor_lpuart_defconfig            |    3 +
 configs/ls1021aqds_qspi_defconfig                  |    3 +
 configs/ls1021aqds_sdcard_ifc_defconfig            |    3 +
 configs/ls1021aqds_sdcard_qspi_defconfig           |    3 +
 configs/ls1021atwr_nor_SECURE_BOOT_defconfig       |    2 +
 configs/ls1021atwr_nor_defconfig                   |    3 +
 configs/ls1021atwr_nor_lpuart_defconfig            |    3 +
 configs/ls1021atwr_qspi_defconfig                  |    3 +
 configs/ls1021atwr_sdcard_ifc_defconfig            |    2 +
 configs/ls1021atwr_sdcard_qspi_defconfig           |    3 +
 drivers/crypto/fsl/jr.c                            |  271 +++++++++++---------
 drivers/crypto/fsl/jr.h                            |    3 +
 drivers/ddr/fsl/fsl_ddr_gen4.c                     |   27 +-
 drivers/mtd/spi/sf_internal.h                      |    5 +
 drivers/mtd/spi/spi_flash.c                        |   72 ++++++
 drivers/spi/fsl_qspi.c                             |  159 +++++++++---
 include/configs/ls1043a_common.h                   |    5 +
 include/configs/ls1043ardb.h                       |   22 ++
 include/configs/ls2080a_common.h                   |    8 +
 include/configs/ls2080aqds.h                       |    2 +-
 include/configs/ls2080ardb.h                       |    2 +-
 include/fsl_ddr_sdram.h                            |   11 +
 include/fsl_sec.h                                  |    6 +-
 55 files changed, 631 insertions(+), 218 deletions(-)

Thanks.

York

Comments

Tom Rini May 24, 2016, 11:18 p.m. UTC | #1 
On Tue, May 24, 2016 at 10:28:07AM -0700, York Sun wrote:

> Tom,
> 
> The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:
> 
>   Prepare v2016.05 (2016-05-16 10:40:32 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fsl-qoriq.git master
> 
> for you to fetch changes up to bc323b3fa7cbf1008f02d342c0505231961b5fa6:
> 
>   armv8: ls1043ardb: enable scsi command and pcie to sata converter (2016-05-18
> 08:52:42 -0700)
> 

Applied to u-boot/master, thanks!