Message ID | 1464003540-13009-1-git-send-email-antonynpavlov@gmail.com |
---|---|
State | Not Applicable, archived |
Headers | show |
On Mon, May 23, 2016 at 6:39 AM, Antony Pavlov <antonynpavlov@gmail.com> wrote: > Here is the quote from [1]: > > The unit-address must match the first address specified > in the reg property of the node. If the node has no reg property, > the @ and unit-address must be omitted and the node-name alone > differentiates the node from other nodes at the same level > > This patch adjusts MIPS dts-files and devicetree binding > documentation in accordance with [1]. > > [1] Power.org(tm) Standard for Embedded Power Architecture(tm) > Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. > Chapter 2.2.1.1 Node Name Requirements FYI, you can reference "the Devicetree Spec" now: devicetree.org Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> > Cc: Ralf Baechle <ralf@linux-mips.org> > Cc: Paul Burton <paul.burton@imgtec.com> > Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: linux-mips@linux-mips.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > --- > Documentation/devicetree/bindings/mips/cpu_irq.txt | 2 +- > arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +- > arch/mips/boot/dts/ralink/mt7620a.dtsi | 2 +- > arch/mips/boot/dts/ralink/rt2880.dtsi | 2 +- > arch/mips/boot/dts/ralink/rt3050.dtsi | 2 +- > arch/mips/boot/dts/ralink/rt3883.dtsi | 2 +- > arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 2 +- > 7 files changed, 7 insertions(+), 7 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 23 May 2016 10:47:16 -0500 Rob Herring <robh+dt@kernel.org> wrote: > On Mon, May 23, 2016 at 6:39 AM, Antony Pavlov <antonynpavlov@gmail.com> wrote: > > Here is the quote from [1]: > > > > The unit-address must match the first address specified > > in the reg property of the node. If the node has no reg property, > > the @ and unit-address must be omitted and the node-name alone > > differentiates the node from other nodes at the same level > > > > This patch adjusts MIPS dts-files and devicetree binding > > documentation in accordance with [1]. > > > > [1] Power.org(tm) Standard for Embedded Power Architecture(tm) > > Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. > > Chapter 2.2.1.1 Node Name Requirements > > FYI, you can reference "the Devicetree Spec" now: devicetree.org Thanks for your note! Last time I visited devicetree.org in Jan 2015. Now I see that the devicetree.org site has changed dramaticaly, e.g. it does not use Mediawiki anymore. Alas some important links from the http://www.devicetree.org/specifications/ page are broken: * http://www.devicetree.org/specifications-pdf * https://github.com/devicetree-org/devicetree-specification-released Anyway I have got a prerelease specification version from github: https://raw.githubusercontent.com/devicetree-org/devicetree-specification-released/master/prerelease/devicetree-specification-v0.1-pre1-20160429.pdf > Acked-by: Rob Herring <robh@kernel.org> > > > Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> > > Cc: Ralf Baechle <ralf@linux-mips.org> > > Cc: Paul Burton <paul.burton@imgtec.com> > > Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Pawel Moll <pawel.moll@arm.com> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > > Cc: Kumar Gala <galak@codeaurora.org> > > Cc: linux-mips@linux-mips.org > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > --- > > Documentation/devicetree/bindings/mips/cpu_irq.txt | 2 +- > > arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +- > > arch/mips/boot/dts/ralink/mt7620a.dtsi | 2 +- > > arch/mips/boot/dts/ralink/rt2880.dtsi | 2 +- > > arch/mips/boot/dts/ralink/rt3050.dtsi | 2 +- > > arch/mips/boot/dts/ralink/rt3883.dtsi | 2 +- > > arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 2 +- > > 7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt index fc149f3..f080f06 100644 --- a/Documentation/devicetree/bindings/mips/cpu_irq.txt +++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt @@ -13,7 +13,7 @@ Required properties: - compatible : Should be "mti,cpu-interrupt-controller" Example devicetree: - cpu-irq: cpu-irq@0 { + cpu-irq: cpu-irq { #address-cells = <0>; interrupt-controller; diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 4a9c8f2..f6ae6ed 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -5,7 +5,7 @@ #size-cells = <1>; compatible = "ingenic,jz4740"; - cpuintc: interrupt-controller@0 { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi index 08bf24f..793c0c7 100644 --- a/arch/mips/boot/dts/ralink/mt7620a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi index 182afde..fb2faef 100644 --- a/arch/mips/boot/dts/ralink/rt2880.dtsi +++ b/arch/mips/boot/dts/ralink/rt2880.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi index e3203d4..d3cb57f 100644 --- a/arch/mips/boot/dts/ralink/rt3050.dtsi +++ b/arch/mips/boot/dts/ralink/rt3050.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi index 3b131dd..3d6fc9a 100644 --- a/arch/mips/boot/dts/ralink/rt3883.dtsi +++ b/arch/mips/boot/dts/ralink/rt3883.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts index 686ebd1..48d2112 100644 --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts @@ -10,7 +10,7 @@ reg = <0x0 0x08000000>; }; - cpuintc: interrupt-controller@0 { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller;
Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- Documentation/devicetree/bindings/mips/cpu_irq.txt | 2 +- arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +- arch/mips/boot/dts/ralink/mt7620a.dtsi | 2 +- arch/mips/boot/dts/ralink/rt2880.dtsi | 2 +- arch/mips/boot/dts/ralink/rt3050.dtsi | 2 +- arch/mips/boot/dts/ralink/rt3883.dtsi | 2 +- arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-)