Message ID | 1463554441-47982-2-git-send-email-yendapally.reddy@broadcom.com |
---|---|
State | Superseded |
Headers | show |
Am I supposed to ignore since this is "internal"? On Wed, May 18, 2016 at 02:53:59AM -0400, Yendapally Reddy Dhananjaya Reddy wrote: > Add a binding for Broadcom iproc pwm controller > > Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> > --- > .../devicetree/bindings/pwm/brcm,iproc-pwm.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-pwm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, On 16-05-18 03:15 PM, Rob Herring wrote: > Am I supposed to ignore since this is "internal"? The "INTERNAL" was supposed to be removed after internal review before sending out to the public mailing list. Also, Yendapally's git email config was not setup properly so some are tagging the patchset as spam. Other than that, everything is fine with the PATCH sent out to the open source community :) I'm sure Yendapally will send out an updated version with those items corrected (and can add your Acked-by now). Thanks, Scott > > On Wed, May 18, 2016 at 02:53:59AM -0400, Yendapally Reddy Dhananjaya Reddy wrote: >> Add a binding for Broadcom iproc pwm controller >> >> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> >> --- >> .../devicetree/bindings/pwm/brcm,iproc-pwm.txt | 21 +++++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt > > Acked-by: Rob Herring <robh@kernel.org> > -- To unsubscribe from this list: send the line "unsubscribe linux-pwm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt new file mode 100644 index 0000000..21f75bb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt @@ -0,0 +1,21 @@ +Broadcom iProc PWM controller device tree bindings + +This controller has 4 channels. + +Required Properties : +- compatible: must be "brcm,iproc-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle + clock specifier pair for the external clock +- #pwm-cells: Should be 3. See pwm.txt in this directory for a + description of the cells format. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +pwm: pwm@18031000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18031000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; +};
Add a binding for Broadcom iproc pwm controller Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> --- .../devicetree/bindings/pwm/brcm,iproc-pwm.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt