@@ -4671,6 +4671,7 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
link_info->transceiver = resp->xcvr_pkg_type;
link_info->phy_addr = resp->eee_config_phy_addr &
PORT_PHY_QCFG_RESP_PHY_ADDR_MASK;
+ link_info->module_status = resp->module_status;
if (bp->flags & BNXT_FLAG_EEE_CAP) {
struct ethtool_eee *eee = &bp->eee;
@@ -829,6 +829,7 @@ struct bnxt_link_info {
u16 lp_auto_link_speeds;
u16 force_link_speed;
u32 preemphasis;
+ u8 module_status;
/* copy of requested setting from ethtool cmd */
u8 autoneg;
@@ -1121,6 +1122,16 @@ static inline void bnxt_disable_poll(struct bnxt_napi *bnapi)
#endif
+#define I2C_DEV_ADDR_A0 0xa0
+#define I2C_DEV_ADDR_A2 0xa2
+#define SFP_EEPROM_SFF_8472_COMP_ADDR 0x5e
+#define SFP_EEPROM_SFF_8472_COMP_SIZE 1
+#define SFF_MODULE_ID_SFP 0x3
+#define SFF_MODULE_ID_QSFP 0xc
+#define SFF_MODULE_ID_QSFP_PLUS 0xd
+#define SFF_MODULE_ID_QSFP28 0x11
+#define BNXT_MAX_PHY_I2C_RESP_SIZE 64
+
void bnxt_set_ring_params(struct bnxt *);
void bnxt_hwrm_cmd_hdr_init(struct bnxt *, void *, u16, u16, u16);
int _hwrm_send_message(struct bnxt *, void *, u32, int);
@@ -1498,6 +1498,124 @@ static int bnxt_get_eee(struct net_device *dev, struct ethtool_eee *edata)
return 0;
}
+static int bnxt_read_sfp_module_eeprom_info(struct bnxt *bp, u16 i2c_addr,
+ u16 page_number, u16 start_addr,
+ u16 data_length, u8 *buf)
+{
+ struct hwrm_port_phy_i2c_read_input req = {0};
+ struct hwrm_port_phy_i2c_read_output *output = bp->hwrm_cmd_resp_addr;
+ int rc, byte_offset = 0;
+
+ bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_PORT_PHY_I2C_READ, -1, -1);
+ req.i2c_slave_addr = i2c_addr;
+ req.page_number = cpu_to_le16(page_number);
+ req.port_id = cpu_to_le16(bp->pf.port_id);
+ do {
+ u16 xfer_size;
+
+ xfer_size = min_t(u16, data_length, BNXT_MAX_PHY_I2C_RESP_SIZE);
+ data_length -= xfer_size;
+ req.page_offset = cpu_to_le16(start_addr + byte_offset);
+ req.data_length = xfer_size;
+ req.enables = cpu_to_le32(start_addr + byte_offset ?
+ PORT_PHY_I2C_READ_REQ_ENABLES_PAGE_OFFSET : 0);
+ mutex_lock(&bp->hwrm_cmd_lock);
+ rc = _hwrm_send_message(bp, &req, sizeof(req),
+ HWRM_CMD_TIMEOUT);
+ if (!rc)
+ memcpy(buf + byte_offset, output->data, xfer_size);
+ mutex_unlock(&bp->hwrm_cmd_lock);
+ byte_offset += xfer_size;
+ } while (!rc && data_length > 0);
+
+ return rc;
+}
+
+static int bnxt_get_module_info(struct net_device *dev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct bnxt *bp = netdev_priv(dev);
+ struct hwrm_port_phy_i2c_read_input req = {0};
+ struct hwrm_port_phy_i2c_read_output *output = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ /* No point in going further if phy status indicates
+ * module is not inserted or if it is powered down or
+ * if it is of type 10GBase-T
+ */
+ if (bp->link_info.module_status >
+ PORT_PHY_QCFG_RESP_MODULE_STATUS_WARNINGMSG)
+ return -EOPNOTSUPP;
+
+ /* This feature is not supported in older firmware versions */
+ if (bp->hwrm_spec_code < 0x10202)
+ return -EOPNOTSUPP;
+
+ bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_PORT_PHY_I2C_READ, -1, -1);
+ req.i2c_slave_addr = I2C_DEV_ADDR_A0;
+ req.page_number = 0;
+ req.page_offset = cpu_to_le16(SFP_EEPROM_SFF_8472_COMP_ADDR);
+ req.data_length = SFP_EEPROM_SFF_8472_COMP_SIZE;
+ req.port_id = cpu_to_le16(bp->pf.port_id);
+ mutex_lock(&bp->hwrm_cmd_lock);
+ rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+ if (!rc) {
+ u32 module_id = le32_to_cpu(output->data[0]);
+
+ switch (module_id) {
+ case SFF_MODULE_ID_SFP:
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ break;
+ case SFF_MODULE_ID_QSFP:
+ case SFF_MODULE_ID_QSFP_PLUS:
+ modinfo->type = ETH_MODULE_SFF_8436;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ break;
+ case SFF_MODULE_ID_QSFP28:
+ modinfo->type = ETH_MODULE_SFF_8636;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+ }
+ mutex_unlock(&bp->hwrm_cmd_lock);
+ return rc;
+}
+
+static int bnxt_get_module_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct bnxt *bp = netdev_priv(dev);
+ u16 start = eeprom->offset, length = eeprom->len;
+ int rc;
+
+ memset(data, 0, eeprom->len);
+
+ /* Read A0 portion of the EEPROM */
+ if (start < ETH_MODULE_SFF_8436_LEN) {
+ if (start + eeprom->len > ETH_MODULE_SFF_8436_LEN)
+ length = ETH_MODULE_SFF_8436_LEN - start;
+ rc = bnxt_read_sfp_module_eeprom_info(bp, I2C_DEV_ADDR_A0, 0,
+ start, length, data);
+ if (rc)
+ return rc;
+ start += length;
+ length = eeprom->len - length;
+ }
+
+ /* Read A2 portion of the EEPROM */
+ if (length) {
+ start -= ETH_MODULE_SFF_8436_LEN;
+ bnxt_read_sfp_module_eeprom_info(bp, I2C_DEV_ADDR_A2, 1, start,
+ length, data + start);
+ }
+ return rc;
+}
+
const struct ethtool_ops bnxt_ethtool_ops = {
.get_settings = bnxt_get_settings,
.set_settings = bnxt_set_settings,
@@ -1528,4 +1646,6 @@ const struct ethtool_ops bnxt_ethtool_ops = {
.get_link = bnxt_get_link,
.get_eee = bnxt_get_eee,
.set_eee = bnxt_set_eee,
+ .get_module_info = bnxt_get_module_info,
+ .get_module_eeprom = bnxt_get_module_eeprom,
};
@@ -2093,6 +2093,40 @@ struct hwrm_port_phy_qcaps_output {
#define PORT_PHY_QCAPS_RESP_VALID_SFT 24
};
+/* hwrm_port_phy_i2c_read */
+/* Input (40 bytes) */
+struct hwrm_port_phy_i2c_read_input {
+ __le16 req_type;
+ __le16 cmpl_ring;
+ __le16 seq_id;
+ __le16 target_id;
+ __le64 resp_addr;
+ __le32 flags;
+ __le32 enables;
+ #define PORT_PHY_I2C_READ_REQ_ENABLES_PAGE_OFFSET 0x1UL
+ __le16 port_id;
+ u8 i2c_slave_addr;
+ u8 unused_0;
+ __le16 page_number;
+ __le16 page_offset;
+ u8 data_length;
+ u8 unused_1[7];
+};
+
+/* Output (80 bytes) */
+struct hwrm_port_phy_i2c_read_output {
+ __le16 error_code;
+ __le16 req_type;
+ __le16 seq_id;
+ __le16 resp_len;
+ __le32 data[16];
+ __le32 unused_0;
+ u8 unused_1;
+ u8 unused_2;
+ u8 unused_3;
+ u8 valid;
+};
+
/* Input (24 bytes) */
struct hwrm_queue_qportcfg_input {
__le16 req_type;