@@ -456,6 +456,13 @@ config ARCH_KEYSTONE
select SUPPORT_SPL
select CMD_POWEROFF
+config ARCH_MESON
+ bool "Amlogic Meson"
+ help
+ Support for the Meson SoC family developed by Amlogic Inc.,
+ targeted at media players and tablet computers. We currently
+ support the S905 (GXBaby) 64-bit SoC.
+
config ARCH_MX7
bool "Freescale MX7"
select CPU_V7
@@ -781,6 +788,8 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/cpu/armv7/rmobile/Kconfig"
+source "arch/arm/mach-meson/Kconfig"
+
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-s5pc1xx/Kconfig"
@@ -50,6 +50,7 @@ machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
# TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
machine-$(CONFIG_KIRKWOOD) += kirkwood
+machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MVEBU) += mvebu
# TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
@@ -26,6 +26,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-jerry.dtb \
rk3288-rock2-square.dtb \
rk3036-sdk.dtb
+dtb-$(CONFIG_ARCH_MESON) += \
+ meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
new file mode 100644
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
+ model = "Hardkernel ODROID-C2";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "amlogic,meson-gxbb";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cbus: cbus@c1100000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc1100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+ uart_A: serial@84c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x084c0 0x0 0x14>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@c4301000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xc4301000 0 0x1000>,
+ <0x0 0xc4302000 0 0x2000>,
+ <0x0 0xc4304000 0 0x2000>,
+ <0x0 0xc4306000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ aobus: aobus@c8100000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+ uart_AO: serial@4c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x004c0 0x0 0x14>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+ };
+
+ apb: apb@d0000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xd0000000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GXBB_H__
+#define __GXBB_H__
+
+#define GXBB_PERIPHS_BASE 0xc8834400
+#define GXBB_HIU_BASE 0xc883c000
+#define GXBB_ETH_BASE 0xc9410000
+
+/* Peripherals registers */
+#define GXBB_PERIPHS_ADDR(off) (GXBB_PERIPHS_BASE + ((off) << 2))
+
+/* GPIO registers 0 to 6 */
+#define _GXBB_GPIO_OFF(n) ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
+#define GXBB_GPIO_EN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 0)
+#define GXBB_GPIO_IN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1)
+#define GXBB_GPIO_OUT(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2)
+
+/* Pinmux registers 0 to 12 */
+#define GXBB_PINMUX(n) GXBB_PERIPHS_ADDR(0x2c + (n))
+
+#define GXBB_ETH_REG_0 GXBB_PERIPHS_ADDR(0x50)
+#define GXBB_ETH_REG_1 GXBB_PERIPHS_ADDR(0x51)
+
+#define GXBB_ETH_REG_0_PHY_INTF BIT(0)
+#define GXBB_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
+#define GXBB_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
+#define GXBB_ETH_REG_0_PHY_CLK_EN BIT(10)
+#define GXBB_ETH_REG_0_CLK_EN BIT(12)
+
+/* HIU registers */
+#define GXBB_HIU_ADDR(off) (GXBB_HIU_BASE + ((off) << 2))
+
+#define GXBB_MEM_PD_REG_0 GXBB_HIU_ADDR(0x40)
+
+/* Ethernet memory power domain */
+#define GXBB_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
+
+/* Clock gates */
+#define GXBB_GCLK_MPEG_0 GXBB_HIU_ADDR(0x50)
+#define GXBB_GCLK_MPEG_1 GXBB_HIU_ADDR(0x51)
+#define GXBB_GCLK_MPEG_2 GXBB_HIU_ADDR(0x52)
+#define GXBB_GCLK_MPEG_OTHER GXBB_HIU_ADDR(0x53)
+#define GXBB_GCLK_MPEG_AO GXBB_HIU_ADDR(0x54)
+
+#define GXBB_GCLK_MPEG_1_ETH BIT(3)
+
+#endif /* __GXBB_H__ */
new file mode 100644
@@ -0,0 +1,31 @@
+if ARCH_MESON
+
+config MESON_GXBB
+ bool "Support Meson GXBaby"
+ select ARM64
+ select DM
+ select DM_SERIAL
+ help
+ The Amlogic Meson GXBaby (S905) is an ARM SoC with a
+ quad-core Cortex-A53 CPU and a Mali-450 GPU.
+
+if MESON_GXBB
+
+config TARGET_ODROID_C2
+ bool "ODROID-C2"
+ help
+ ODROID-C2 is a single board computer based on Meson GXBaby
+ with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD
+ slot, eMMC, IR receiver and a 40-pin GPIO header.
+
+endif
+
+config SYS_SOC
+ default "meson"
+
+config SYS_MALLOC_F_LEN
+ default 0x1000
+
+source "board/hardkernel/odroid-c2/Kconfig"
+
+endif
new file mode 100644
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2016 Beniamino Galvani <b.galvani@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += board.o
new file mode 100644
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <linux/err.h>
+#include <asm/arch/gxbb.h>
+#include <asm/armv8/mmu.h>
+#include <asm/unaligned.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ const fdt64_t *val;
+ int offset;
+ int len;
+
+ offset = fdt_path_offset(gd->fdt_blob, "/memory");
+ if (offset < 0)
+ return -EINVAL;
+
+ val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
+ if (len < sizeof(*val) * 2)
+ return -EINVAL;
+
+ /* Use unaligned access since cache is still disabled */
+ gd->ram_size = get_unaligned_be64(&val[1]);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ /* Reserve first 16 MiB of RAM for firmware */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE + (16 * 1024 * 1024);
+ gd->bd->bi_dram[0].size = gd->ram_size - (16 * 1024 * 1024);
+}
+
+void reset_cpu(ulong addr)
+{
+ psci_system_reset(true);
+}
+
+static struct mm_region gxbb_mem_map[] = {
+ {
+ .base = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .base = 0x80000000UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = gxbb_mem_map;
new file mode 100644
@@ -0,0 +1,12 @@
+if TARGET_ODROID_C2
+
+config SYS_BOARD
+ default "odroid-c2"
+
+config SYS_VENDOR
+ default "hardkernel"
+
+config SYS_CONFIG_NAME
+ default "odroid-c2"
+
+endif
new file mode 100644
@@ -0,0 +1,6 @@
+ODROID-C2
+M: Beniamino Galvani <b.galvani@gmail.com>
+S: Maintained
+F: board/hardkernel/odroid-c2/
+F: include/configs/odroid-c2.h
+F: configs/odroid-c2_defconfig
new file mode 100644
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := odroid-c2.o
new file mode 100644
@@ -0,0 +1,60 @@
+U-Boot for ODROID-C2
+====================
+
+ODROID-C2 is a single board computer manufactured by Hardkernel
+Co. Ltd with the following specifications:
+
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
+ - ARM Mali 450 GPU
+ - 2GB DDR3 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.0 4K/60Hz display
+ - 40-pin GPIO header
+ - 4 x USB 2.0 Host, 1 x USB OTG
+ - eMMC, microSD
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+Currently the u-boot port supports the following devices:
+ - serial
+ - Ethernet
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make odroid-c2_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > DIR=odroid-c2
+ > git clone --depth 1 \
+ https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
+ $DIR
+ > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
+ --bl301 $DIR/fip/gxb/bl301.bin \
+ --bl31 $DIR/fip/gxb/bl31.bin \
+ --bl33 u-boot.bin \
+ $DIR/fip.bin
+ > $DIR/fip/fip_create --dump $DIR/fip.bin
+ > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
+ > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
+ --input $DIR/boot_new.bin \
+ --output $DIR/u-boot.img
+ > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > BL1=$DIR/sd_fuse/bl1.bin.hardkernel
+ > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
+ > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
+ > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97
new file mode 100644
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <dm/platdata.h>
+#include <phy.h>
+
+int board_init(void)
+{
+ return 0;
+}
+
+static const struct eth_pdata gxbb_eth_pdata = {
+ .iobase = GXBB_ETH_BASE,
+ .phy_interface = PHY_INTERFACE_MODE_RGMII,
+};
+
+U_BOOT_DEVICE(meson_eth) = {
+ .name = "eth_designware",
+ .platdata = &gxbb_eth_pdata,
+};
+
+int misc_init_r(void)
+{
+ /* Select Ethernet function */
+ setbits_le32(GXBB_PINMUX(6), 0x3fff);
+
+ /* Set RGMII mode */
+ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
+ GXBB_ETH_REG_0_TX_PHASE(1) |
+ GXBB_ETH_REG_0_TX_RATIO(4) |
+ GXBB_ETH_REG_0_PHY_CLK_EN |
+ GXBB_ETH_REG_0_CLK_EN);
+
+ /* Enable power and clock gate */
+ setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+ clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+
+ /* Reset PHY on GPIOZ_14 */
+ clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
+ clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+ mdelay(10);
+ setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MESON=y
+CONFIG_MESON_GXBB=y
+CONFIG_TARGET_ODROID_C2=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_BASE=0xc81004c0
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
@@ -112,6 +112,14 @@ config DEBUG_UART_S5P
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
+config DEBUG_UART_MESON
+ bool "Amlogic Meson"
+ depends on MESON_SERIAL
+ help
+ Select this to enable a debug UART using the serial_meson driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver-model serial is running.
+
config DEBUG_UART_UARTLITE
bool "Xilinx Uartlite"
help
@@ -320,6 +328,13 @@ config XILINX_UARTLITE
If you have a Xilinx based board and want to use the uartlite
serial ports, say Y to this option. If unsure, say N.
+config MESON_SERIAL
+ bool "Support for Amlogic Meson UART"
+ depends on DM_SERIAL && ARCH_MESON
+ help
+ If you have an Amlogic Meson based board and want to use the on-chip
+ serial ports, say Y to this option. If unsure, say N.
+
config MSM_SERIAL
bool "Qualcomm on-chip UART"
depends on DM_SERIAL
@@ -26,6 +26,7 @@ obj-$(CONFIG_SYS_NS16550) += ns16550.o
obj-$(CONFIG_S5P) += serial_s5p.o
obj-$(CONFIG_MXC_UART) += serial_mxc.o
obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
+obj-$(CONFIG_MESON_SERIAL) += serial_meson.o
obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o
obj-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
obj-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
new file mode 100644
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <linux/compiler.h>
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct meson_uart {
+ u32 wfifo;
+ u32 rfifo;
+ u32 control;
+ u32 status;
+ u32 misc;
+};
+
+struct meson_serial_platdata {
+ struct meson_uart *reg;
+};
+
+/* AML_UART_STATUS bits */
+#define AML_UART_PARITY_ERR BIT(16)
+#define AML_UART_FRAME_ERR BIT(17)
+#define AML_UART_TX_FIFO_WERR BIT(18)
+#define AML_UART_RX_EMPTY BIT(20)
+#define AML_UART_TX_FULL BIT(21)
+#define AML_UART_TX_EMPTY BIT(22)
+#define AML_UART_XMIT_BUSY BIT(25)
+#define AML_UART_ERR (AML_UART_PARITY_ERR | \
+ AML_UART_FRAME_ERR | \
+ AML_UART_TX_FIFO_WERR)
+
+/* AML_UART_CONTROL bits */
+#define AML_UART_TX_EN BIT(12)
+#define AML_UART_RX_EN BIT(13)
+#define AML_UART_TX_RST BIT(22)
+#define AML_UART_RX_RST BIT(23)
+#define AML_UART_CLR_ERR BIT(24)
+
+static void meson_serial_init(struct meson_uart *uart)
+{
+ u32 val;
+
+ val = readl(&uart->control);
+ val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
+ writel(val, &uart->control);
+ val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
+ writel(val, &uart->control);
+ val |= (AML_UART_RX_EN | AML_UART_TX_EN);
+ writel(val, &uart->control);
+}
+
+static int meson_serial_probe(struct udevice *dev)
+{
+ struct meson_serial_platdata *plat = dev->platdata;
+ struct meson_uart *const uart = plat->reg;
+
+ meson_serial_init(uart);
+
+ return 0;
+}
+
+static int meson_serial_getc(struct udevice *dev)
+{
+ struct meson_serial_platdata *plat = dev->platdata;
+ struct meson_uart *const uart = plat->reg;
+
+ if (readl(&uart->status) & AML_UART_RX_EMPTY)
+ return -EAGAIN;
+
+ return readl(&uart->rfifo) & 0xff;
+}
+
+static int meson_serial_putc(struct udevice *dev, const char ch)
+{
+ struct meson_serial_platdata *plat = dev->platdata;
+ struct meson_uart *const uart = plat->reg;
+
+ if (readl(&uart->status) & AML_UART_TX_FULL)
+ return -EAGAIN;
+
+ writel(ch, &uart->wfifo);
+
+ return 0;
+}
+
+static int meson_serial_pending(struct udevice *dev, bool input)
+{
+ struct meson_serial_platdata *plat = dev->platdata;
+ struct meson_uart *const uart = plat->reg;
+ uint32_t status = readl(&uart->status);
+
+ if (input)
+ return !(status & AML_UART_RX_EMPTY);
+ else
+ return !(status & AML_UART_TX_FULL);
+}
+
+static int meson_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct meson_serial_platdata *plat = dev->platdata;
+ fdt_addr_t addr;
+
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ plat->reg = (struct meson_uart *)addr;
+
+ return 0;
+}
+
+static const struct dm_serial_ops meson_serial_ops = {
+ .putc = meson_serial_putc,
+ .pending = meson_serial_pending,
+ .getc = meson_serial_getc,
+};
+
+static const struct udevice_id meson_serial_ids[] = {
+ { .compatible = "amlogic,meson-uart" },
+ { }
+};
+
+U_BOOT_DRIVER(serial_meson) = {
+ .name = "serial_meson",
+ .id = UCLASS_SERIAL,
+ .of_match = meson_serial_ids,
+ .probe = meson_serial_probe,
+ .ops = &meson_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .ofdata_to_platdata = meson_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct meson_serial_platdata),
+};
+
+#ifdef CONFIG_DEBUG_UART_MESON
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ struct meson_uart *regs = (struct meson_uart *)CONFIG_DEBUG_UART_BASE;
+
+ while (readl(®s->status) & AML_UART_TX_FULL)
+ ;
+
+ writel(ch, ®s->wfifo);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
new file mode 100644
@@ -0,0 +1,51 @@
+/*
+ * Configuration for ODROID-C2
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_CPU_ARMV8
+#define CONFIG_REMAKE_ELF
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xc4301000
+#define GICC_BASE 0xc4302000
+
+#define CONFIG_IDENT_STRING " odroid-c2"
+
+/* Serial setup */
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_CMD_ENV
+
+/* Monitor Command Prompt */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#include <config_distro_defaults.h>
+
+#endif /* __CONFIG_H */