diff mbox

powerpc: Fix sstep compile on powerpcspe

Message ID 20160505204444.GE3264@csclub.uwaterloo.ca (mailing list archive)
State Accepted
Headers show

Commit Message

Lennart Sorensen May 5, 2016, 8:44 p.m. UTC
powerpc: Fix sstep compile on powerpcspe

Commit be96f63375a14ee8e690856ac77e579c75bd0bae introduced ldarx and stdcx
into the instructions in sstep.c, which are not accepted by the assembler
on powerpcspe, but does seem to be accepted by the normal powerpc assembler
even in 32 bit mode.

Wrap these two instructions in a __powerpc64__ check like it is everywhere
else in the file.

Fixes: be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()")
Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
---
 arch/powerpc/lib/sstep.c |    4 ++++
 1 file changed, 4 insertions(+)

Comments

Lennart Sorensen May 5, 2016, 8:53 p.m. UTC | #1
On Thu, May 05, 2016 at 04:44:44PM -0400, Lennart Sorensen wrote:
> powerpc: Fix sstep compile on powerpcspe
> 
> Commit be96f63375a14ee8e690856ac77e579c75bd0bae introduced ldarx and stdcx
> into the instructions in sstep.c, which are not accepted by the assembler
> on powerpcspe, but does seem to be accepted by the normal powerpc assembler
> even in 32 bit mode.
> 
> Wrap these two instructions in a __powerpc64__ check like it is everywhere
> else in the file.
> 
> Fixes: be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()")
> Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
> ---
>  arch/powerpc/lib/sstep.c |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
> index dc885b3..6d34310 100644
> --- a/arch/powerpc/lib/sstep.c
> +++ b/arch/powerpc/lib/sstep.c
> @@ -1818,9 +1818,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
>  		case 4:
>  			__get_user_asmx(val, op.ea, err, "lwarx");
>  			break;
> +#ifdef __powerpc64__
>  		case 8:
>  			__get_user_asmx(val, op.ea, err, "ldarx");
>  			break;
> +#endif
>  		default:
>  			return 0;
>  		}
> @@ -1841,9 +1843,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
>  		case 4:
>  			__put_user_asmx(op.val, op.ea, err, "stwcx.", cr);
>  			break;
> +#ifdef __powerpc64__
>  		case 8:
>  			__put_user_asmx(op.val, op.ea, err, "stdcx.", cr);
>  			break;
> +#endif
>  		default:
>  			return 0;
>  		}
> -- 
> 1.7.10.4

Perhaps this should be considered for -stable as well since it is fixing
a regression for powerpcspe.
Michael Ellerman May 10, 2016, 9:48 p.m. UTC | #2
On Thu, 2016-05-05 at 20:44:44 UTC, Lennart Sorensen wrote:
> powerpc: Fix sstep compile on powerpcspe
> 
> Commit be96f63375a14ee8e690856ac77e579c75bd0bae introduced ldarx and stdcx
> into the instructions in sstep.c, which are not accepted by the assembler
> on powerpcspe, but does seem to be accepted by the normal powerpc assembler
> even in 32 bit mode.
> 
> Wrap these two instructions in a __powerpc64__ check like it is everywhere
> else in the file.
> 
> Fixes: be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()")
> Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/03be7e53dee606c189a66a7389

cheers
diff mbox

Patch

diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index dc885b3..6d34310 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -1818,9 +1818,11 @@  int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		case 4:
 			__get_user_asmx(val, op.ea, err, "lwarx");
 			break;
+#ifdef __powerpc64__
 		case 8:
 			__get_user_asmx(val, op.ea, err, "ldarx");
 			break;
+#endif
 		default:
 			return 0;
 		}
@@ -1841,9 +1843,11 @@  int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		case 4:
 			__put_user_asmx(op.val, op.ea, err, "stwcx.", cr);
 			break;
+#ifdef __powerpc64__
 		case 8:
 			__put_user_asmx(op.val, op.ea, err, "stdcx.", cr);
 			break;
+#endif
 		default:
 			return 0;
 		}