diff mbox

[V2] pinctrl: tegra: Correctly check the supported configuration

Message ID 1462209804-16582-1-git-send-email-ldewangan@nvidia.com
State Accepted, archived
Headers show

Commit Message

Laxman Dewangan May 2, 2016, 5:23 p.m. UTC
The pincontrol registers of Tegra chips has multiple filed per
registers. There is two type of registers mux and drive. All
configurations belongs to one of these registers.

If any configurations are supported then <config>_bit is set to
bit position of these registers otherwise -1 to not support it.
The member is defined as
	s32 <config>_bit:6;

So if config is not supported ifor given SoC then it is set to -1
in soc pinmmux table.
In common driver code, to find out that given config is supported
or not, it is checked as:

s8 bit = <config>_bit;
if (bit > 31) {
	/* Not supported config */
}

But in this case, bit is s8 and hence for non supporting it is -1.

Correct the check as:
if (bit < 0) {
	/* Not supported config */
}

Fixes: e4c02dced975cb ("pinctrl: tegra: use signed bitfields for optional fields")

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/pinctrl/tegra/pinctrl-tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Stephen Warren May 2, 2016, 5:47 p.m. UTC | #1
On 05/02/2016 11:23 AM, Laxman Dewangan wrote:
> The pincontrol registers of Tegra chips has multiple filed per
> registers. There is two type of registers mux and drive. All
> configurations belongs to one of these registers.
>
> If any configurations are supported then <config>_bit is set to
> bit position of these registers otherwise -1 to not support it.
> The member is defined as
> 	s32 <config>_bit:6;
>
> So if config is not supported ifor given SoC then it is set to -1
> in soc pinmmux table.
> In common driver code, to find out that given config is supported
> or not, it is checked as:
>
> s8 bit = <config>_bit;
> if (bit > 31) {
> 	/* Not supported config */
> }
>
> But in this case, bit is s8 and hence for non supporting it is -1.
>
> Correct the check as:
> if (bit < 0) {
> 	/* Not supported config */
> }
>
> Fixes: e4c02dced975cb ("pinctrl: tegra: use signed bitfields for optional fields")
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>

Nit: There shouldn't be a blank line between the Fixes: and 
Signed-off-by: lines. I assume this can be fixed when the patch is applied.

Acked-by: Stephen Warren <swarren@nvidia.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij May 11, 2016, 9:24 a.m. UTC | #2
On Mon, May 2, 2016 at 7:23 PM, Laxman Dewangan <ldewangan@nvidia.com> wrote:

> The pincontrol registers of Tegra chips has multiple filed per
> registers. There is two type of registers mux and drive. All
> configurations belongs to one of these registers.
>
> If any configurations are supported then <config>_bit is set to
> bit position of these registers otherwise -1 to not support it.
> The member is defined as
>         s32 <config>_bit:6;
>
> So if config is not supported ifor given SoC then it is set to -1
> in soc pinmmux table.
> In common driver code, to find out that given config is supported
> or not, it is checked as:
>
> s8 bit = <config>_bit;
> if (bit > 31) {
>         /* Not supported config */
> }
>
> But in this case, bit is s8 and hence for non supporting it is -1.
>
> Correct the check as:
> if (bit < 0) {
>         /* Not supported config */
> }
>
> Fixes: e4c02dced975cb ("pinctrl: tegra: use signed bitfields for optional fields")
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>

Patch applied with Stephen's ACK.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index 861baf2..6e82b29 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -417,7 +417,7 @@  static int tegra_pinconf_reg(struct tegra_pmx *pmx,
 		return -ENOTSUPP;
 	}
 
-	if (*reg < 0 || *bit > 31) {
+	if (*reg < 0 || *bit < 0)  {
 		if (report_err) {
 			const char *prop = "unknown";
 			int i;