| Message ID | 1461740704-21501-1-git-send-email-zajec5@gmail.com |
|---|---|
| State | New |
| Headers | show |
On 04/27/2016 12:05 AM, Rafał Miłecki wrote: > Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and > NOR flash") enabled SPI-NOR device on routers using serial flash only. > However there are also devices with two flash memories: > 1) Small SPI attached flash used mostly for booting > 2) Bigger NAND used mostly for storing firmware > On such devices we still need SPI-NOR e.g. to access NVRAM data. > > Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Applied, thanks! -- Florian
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 5087aa8..9cb186e 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -147,3 +147,7 @@ &usb3 { vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 1049ab1..8ce39d5 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -90,3 +90,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 3a94606..6229ef2 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -82,3 +82,7 @@ }; }; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 791d722..0653e7e 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -131,3 +131,7 @@ &usb2 { vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index ace38ef..50cf804 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -113,3 +113,7 @@ &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +};
Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and NOR flash") enabled SPI-NOR device on routers using serial flash only. However there are also devices with two flash memories: 1) Small SPI attached flash used mostly for booting 2) Bigger NAND used mostly for storing firmware On such devices we still need SPI-NOR e.g. to access NVRAM data. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> --- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++ 5 files changed, 20 insertions(+)