@@ -17,6 +17,8 @@ Required properties:
The fourth region is dsa fabric base register and size.
The fifth region is cpld base register and size, it is not required if do not use cpld.
- phy-handle: phy handle of physicl port, 0 if not any phy device. see ethernet.txt [1].
+- reset-field-offset: is offset of reset field. Its value depends on the hardware
+ user manual.
- buf-size: rx buffer size, should be 16-1024.
- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096.
@@ -36,6 +36,7 @@ int hns_dsaf_get_cfg(struct dsaf_device *dsaf_dev)
int ret, i;
u32 desc_num;
u32 buf_size;
+ u32 reset_offset = 0;
const char *mode_str;
struct device_node *np = dsaf_dev->dev->of_node;
@@ -119,6 +120,13 @@ int hns_dsaf_get_cfg(struct dsaf_device *dsaf_dev)
}
dsaf_dev->desc_num = desc_num;
+ ret = of_property_read_u32(np, "reset-field-offset", &reset_offset);
+ if (ret < 0) {
+ dev_dbg(dsaf_dev->dev,
+ "get reset-field-offset fail, ret=%d!\r\n", ret);
+ }
+ dsaf_dev->reset_offset = reset_offset;
+
ret = of_property_read_u32(np, "buf-size", &buf_size);
if (ret < 0) {
dev_err(dsaf_dev->dev,
@@ -281,6 +281,7 @@ struct dsaf_device {
u32 desc_num; /* desc num per queue*/
u32 buf_size; /* ring buffer size */
+ u32 reset_offset; /* reset field offset in sub sysctrl */
int buf_size_type; /* ring buffer size-type */
enum dsaf_mode dsaf_mode; /* dsaf mode */
enum hal_dsaf_mode dsaf_en;
@@ -110,7 +110,11 @@ void hns_dsaf_xge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
return;
reg_val |= RESET_REQ_OR_DREQ;
- reg_val |= 0x2082082 << port;
+
+ if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
+ reg_val |= 0x2082082 << port;
+ else
+ reg_val |= 0x2082082 << (dsaf_dev->reset_offset + 6);
if (val == 0)
reg_addr = DSAF_SUB_SC_XGE_RESET_REQ_REG;
@@ -129,7 +133,11 @@ void hns_dsaf_xge_core_srst_by_port(struct dsaf_device *dsaf_dev,
if (port >= DSAF_XGE_NUM)
return;
- reg_val |= XGMAC_TRX_CORE_SRST_M << port;
+ if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
+ reg_val |= XGMAC_TRX_CORE_SRST_M << port;
+ else
+ reg_val |= XGMAC_TRX_CORE_SRST_M <<
+ (dsaf_dev->reset_offset + 6);
if (val == 0)
reg_addr = DSAF_SUB_SC_XGE_RESET_REQ_REG;
@@ -173,8 +181,8 @@ void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
reg_val_1);
}
} else {
- reg_val_1 = 0x15540 << (port - 6);
- reg_val_2 = 0x100 << (port - 6);
+ reg_val_1 = 0x15540 << dsaf_dev->reset_offset;
+ reg_val_2 = 0x100 << dsaf_dev->reset_offset;
if (val == 0) {
dsaf_write_reg(dsaf_dev->sc_base,
@@ -201,7 +209,11 @@ void hns_ppe_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
u32 reg_val = 0;
u32 reg_addr;
- reg_val |= RESET_REQ_OR_DREQ << port;
+ if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
+ reg_val |= RESET_REQ_OR_DREQ << port;
+ else
+ reg_val |= RESET_REQ_OR_DREQ <<
+ (dsaf_dev->reset_offset + 6);
if (val == 0)
reg_addr = DSAF_SUB_SC_PPE_RESET_REQ_REG;
@@ -213,7 +225,6 @@ void hns_ppe_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
void hns_ppe_com_srst(struct ppe_common_cb *ppe_common, u32 val)
{
- int comm_index = ppe_common->comm_index;
struct dsaf_device *dsaf_dev = ppe_common->dsaf_dev;
u32 reg_val;
u32 reg_addr;
@@ -226,7 +237,7 @@ void hns_ppe_com_srst(struct ppe_common_cb *ppe_common, u32 val)
reg_addr = DSAF_SUB_SC_RCB_PPE_COM_RESET_DREQ_REG;
} else {
- reg_val = 0x100 << (comm_index - 1);
+ reg_val = 0x100 << dsaf_dev->reset_offset;
if (val == 0)
reg_addr = DSAF_SUB_SC_PPE_RESET_REQ_REG;
@@ -247,14 +258,16 @@ phy_interface_t hns_mac_get_phy_if(struct hns_mac_cb *mac_cb)
u32 mode;
u32 reg;
u32 shift;
+ u32 phy_offset;
bool is_ver1 = AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver);
void __iomem *sys_ctl_vaddr = mac_cb->sys_ctl_vaddr;
int mac_id = mac_cb->mac_id;
phy_interface_t phy_if = PHY_INTERFACE_MODE_NA;
- if (is_ver1 && (mac_id >= 6 && mac_id <= 7)) {
+ if (is_ver1 && HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) {
phy_if = PHY_INTERFACE_MODE_SGMII;
- } else if (mac_id >= 0 && mac_id <= 3) {
+ } else if (mac_id >= 0 && mac_id <= 3 &&
+ !HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) {
reg = is_ver1 ? HNS_MAC_HILINK4_REG : HNS_MAC_HILINK4V2_REG;
mode = dsaf_read_reg(sys_ctl_vaddr, reg);
/* mac_id 0, 1, 2, 3 ---> hilink4 lane 0, 1, 2, 3 */
@@ -263,11 +276,14 @@ phy_interface_t hns_mac_get_phy_if(struct hns_mac_cb *mac_cb)
phy_if = PHY_INTERFACE_MODE_XGMII;
else
phy_if = PHY_INTERFACE_MODE_SGMII;
- } else if (mac_id >= 4 && mac_id <= 7) {
+ } else {
reg = is_ver1 ? HNS_MAC_HILINK3_REG : HNS_MAC_HILINK3V2_REG;
mode = dsaf_read_reg(sys_ctl_vaddr, reg);
- /* mac_id 4, 5, 6, 7 ---> hilink3 lane 2, 3, 0, 1 */
- shift = is_ver1 ? 0 : mac_id <= 5 ? mac_id - 2 : mac_id - 6;
+ /* mac_id 4, 5,---> hilink3 lane 2, 3
+ * debug port 0(6), 1(7) ---> hilink3 lane 0, 1
+ */
+ phy_offset = mac_cb->dsaf_dev->reset_offset - 1;
+ shift = is_ver1 ? 0 : mac_id >= 4 ? mac_id - 2 : phy_offset;
if (dsaf_get_bit(mode, shift))
phy_if = PHY_INTERFACE_MODE_XGMII;
else