diff mbox

[14/14] regulator: ti-abb: DT spelling s/#{address, size}-cell/#{address, size}-cells/

Message ID 1461166339-11109-15-git-send-email-geert+renesas@glider.be (mailing list archive)
State Not Applicable
Headers show

Commit Message

Geert Uytterhoeven April 20, 2016, 3:32 p.m. UTC 
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../devicetree/bindings/regulator/ti-abb-regulator.txt         | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Rob Herring April 21, 2016, 7:29 p.m. UTC | #1 
On Wed, Apr 20, 2016 at 10:32 AM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  .../devicetree/bindings/regulator/ti-abb-regulator.txt         | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
> index c58db75f959e601f..c3f6546ebac77742 100644
> --- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
> @@ -14,8 +14,8 @@ Required Properties:
>    - "setup-address"    - contains setup register address of ABB module (ti,abb-v3)
>    - "int-address"      - contains address of interrupt register for ABB module
>    (also see Optional properties)
> -- #address-cell: should be 0
> -- #size-cell: should be 0
> +- #address-cells: should be 0
> +- #size-cells: should be 0

Looks to me like you can just drop these.

Rob
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
index c58db75f959e601f..c3f6546ebac77742 100644
--- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
@@ -14,8 +14,8 @@  Required Properties:
   - "setup-address"	- contains setup register address of ABB module (ti,abb-v3)
   - "int-address"	- contains address of interrupt register for ABB module
   (also see Optional properties)
-- #address-cell: should be 0
-- #size-cell: should be 0
+- #address-cells: should be 0
+- #size-cells: should be 0
 - clocks: should point to the clock node used by ABB module
 - ti,settling-time: Settling time in uSecs from SoC documentation for ABB module
 	to settle down(target time for SR2_WTCNT_VALUE).
@@ -69,7 +69,7 @@  Example #1: Simplest configuration (no efuse data, hard coded ABB table):
 abb_x: regulator-abb-x {
 	compatible = "ti,abb-v1";
 	regulator-name = "abb_x";
-	#address-cell = <0>;
+	#address-cells = <0>;
 	#size-cells = <0>;
 	reg = <0x483072f0 0x8>, <0x48306818 0x4>;
 	reg-names = "base-address", "int-address";
@@ -89,7 +89,7 @@  Example #2: Efuse bits contain ABB mode setting (no LDO override capability)
 abb_y: regulator-abb-y {
 	compatible = "ti,abb-v2";
 	regulator-name = "abb_y";
-	#address-cell = <0>;
+	#address-cells = <0>;
 	#size-cells = <0>;
 	reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, <0x4A002268 0x8>;
 	reg-names = "base-address", "int-address", "efuse-address";
@@ -110,7 +110,7 @@  Example #3: Efuse bits contain ABB mode setting and LDO override capability
 abb_z: regulator-abb-z {
 	compatible = "ti,abb-v2";
 	regulator-name = "abb_z";
-	#address-cell = <0>;
+	#address-cells = <0>;
 	#size-cells = <0>;
 	reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
 	      <0x4a002194 0x8>, <0x4ae0C314 0x4>;