@@ -1451,6 +1451,9 @@ int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
unsigned int mmd, unsigned int reg, u16 *valp);
int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
unsigned int mmd, unsigned int reg, u16 val);
+int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int iqtype, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id);
int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
unsigned int vf, unsigned int iqtype, unsigned int iqid,
unsigned int fl0id, unsigned int fl1id);
@@ -2981,14 +2981,28 @@ void t4_free_ofld_rxqs(struct adapter *adap, int n, struct sge_ofld_rxq *q)
void t4_free_sge_resources(struct adapter *adap)
{
int i;
- struct sge_eth_rxq *eq = adap->sge.ethrxq;
- struct sge_eth_txq *etq = adap->sge.ethtxq;
+ struct sge_eth_rxq *eq;
+ struct sge_eth_txq *etq;
+
+ /* stop all Rx queues in order to start them draining */
+ for (i = 0; i < adap->sge.ethqsets; i++) {
+ eq = &adap->sge.ethrxq[i];
+ if (eq->rspq.desc)
+ t4_iq_stop(adap, adap->mbox, adap->pf, 0,
+ FW_IQ_TYPE_FL_INT_CAP,
+ eq->rspq.cntxt_id,
+ eq->fl.size ? eq->fl.cntxt_id : 0xffff,
+ 0xffff);
+ }
/* clean up Ethernet Tx/Rx queues */
- for (i = 0; i < adap->sge.ethqsets; i++, eq++, etq++) {
+ for (i = 0; i < adap->sge.ethqsets; i++) {
+ eq = &adap->sge.ethrxq[i];
if (eq->rspq.desc)
free_rspq_fl(adap, &eq->rspq,
eq->fl.size ? &eq->fl : NULL);
+
+ etq = &adap->sge.ethtxq[i];
if (etq->q.desc) {
t4_eth_eq_free(adap, adap->mbox, adap->pf, 0,
etq->q.cntxt_id);
@@ -6940,6 +6940,39 @@ int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
}
/**
+ * t4_iq_stop - stop an ingress queue and its FLs
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queues
+ * @vf: the VF owning the queues
+ * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
+ * @iqid: ingress queue id
+ * @fl0id: FL0 queue id or 0xffff if no attached FL0
+ * @fl1id: FL1 queue id or 0xffff if no attached FL1
+ *
+ * Stops an ingress queue and its associated FLs, if any. This causes
+ * any current or future data/messages destined for these queues to be
+ * tossed.
+ */
+int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int iqtype, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id)
+{
+ struct fw_iq_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
+ FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
+ FW_IQ_CMD_VFN_V(vf));
+ c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_IQSTOP_F | FW_LEN16(c));
+ c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
+ c.iqid = cpu_to_be16(iqid);
+ c.fl0id = cpu_to_be16(fl0id);
+ c.fl1id = cpu_to_be16(fl1id);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
* t4_iq_free - free an ingress queue and its FLs
* @adap: the adapter
* @mbox: mailbox to use for the FW command
Stop all Ethernet RX Queues before freeing up various Ingress/Egress Queues, etc. We were seeing cases of Ingress Queues not getting serviced during the shutdown process leading to Ingress Paths jamming up through the chip and blocking the shutdown effort itself. One such case involved the Firmware sending a "Flush Token" through the ULP-TX -> ULP-RX path for an Ethernet TX Queue being freed in order to make sure there weren't any remaining TX Work Requests in the pipeline. But the return path was stalled by Ingress Data unable to be delivered to the Host because those Ingress Queues were no longer being serviced. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 3 +++ drivers/net/ethernet/chelsio/cxgb4/sge.c | 20 +++++++++++++++--- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 33 ++++++++++++++++++++++++++++++ 3 files changed, 53 insertions(+), 3 deletions(-)