| Message ID | 1459929245-23449-1-git-send-email-hunterlaux@gmail.com |
|---|---|
| State | Deferred |
| Headers | show |
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 5fe4a57..f0431f0 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -164,7 +164,7 @@ struct tegra_xtal_freq { u8 enable_delay; u8 stable_count; u8 active_delay; - u8 xtal_freq_count; + u16 xtal_freq_count; u16 debounce; }; @@ -201,6 +201,14 @@ static const struct tegra_xtal_freq tegra_freq_table[] = { .xtal_freq_count = 0xFE, .debounce = 0xFDE8, }, + { + .freq = 38400000, + .enable_delay = 0x00, + .stable_count = 0x00, + .active_delay = 0x18, + .xtal_freq_count = 0x177, + .debounce = 0xBB80, + }, }; static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
The Tegra210 uses a 38.4MHz OSC. This clock table entry is required to use the ehci phy on the Jetson TX1. The xtal_freq_count is actually a 12 bit value, so it should be a u16 instead of u8. Signed-off-by: Hunter Laux <hunterlaux@gmail.com> --- drivers/usb/phy/phy-tegra-usb.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)