diff mbox

[net-next,v2,10/15] fm10k: free MBX IRQ before clearing interrupt scheme

Message ID 1459886547-146445-11-git-send-email-jeffrey.t.kirsher@intel.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T April 5, 2016, 8:02 p.m. UTC 
From: Jacob Keller <jacob.e.keller@intel.com>

During fm10k_io_error_detected we were clearing the interrupt scheme
before we freed the MBX IRQ. This causes a kernel panic because the MBX
IRQ are assigned after MSI-X initialization. Clearing the interrupt
scheme results in removing the MSI-X entry table. Fix this by freeing
the MBX IRQ before we clear the interrupt scheme, as we do elsewhere in
the driver.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 3c7c819..da38af0 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -2274,11 +2274,11 @@  static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev,
 	if (netif_running(netdev))
 		fm10k_close(netdev);
 
+	fm10k_mbx_free_irq(interface);
+
 	/* free interrupts */
 	fm10k_clear_queueing_scheme(interface);
 
-	fm10k_mbx_free_irq(interface);
-
 	pci_disable_device(pdev);
 
 	/* Request a slot reset. */