diff mbox

[net-next,14/14] ixgbe: Add support for toggling VLAN filtering flag via ethtool

Message ID 1459808097-26409-15-git-send-email-jeffrey.t.kirsher@intel.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T April 4, 2016, 10:14 p.m. UTC 
From: Alexander Duyck <aduyck@mirantis.com>

This change makes it so that we can use the ethtool rx-vlan-filter flag to
toggle Rx VLAN filtering on and off.  This is basically just an extension
of the existing VLAN promisc work in that it just adds support for the
additional ethtool flag.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index dcaac50..6b72f3b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4447,6 +4447,7 @@  void ixgbe_set_rx_mode(struct net_device *netdev)
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
+	netdev_features_t features = netdev->features;
 	int count;
 
 	/* Check for Promiscuous and All Multicast modes */
@@ -4464,14 +4465,13 @@  void ixgbe_set_rx_mode(struct net_device *netdev)
 		hw->addr_ctrl.user_set_promisc = true;
 		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
 		vmolr |= IXGBE_VMOLR_MPE;
-		ixgbe_vlan_promisc_enable(adapter);
+		features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
 			fctrl |= IXGBE_FCTRL_MPE;
 			vmolr |= IXGBE_VMOLR_MPE;
 		}
 		hw->addr_ctrl.user_set_promisc = false;
-		ixgbe_vlan_promisc_disable(adapter);
 	}
 
 	/*
@@ -4504,7 +4504,7 @@  void ixgbe_set_rx_mode(struct net_device *netdev)
 	}
 
 	/* This is useful for sniffing bad packets. */
-	if (adapter->netdev->features & NETIF_F_RXALL) {
+	if (features & NETIF_F_RXALL) {
 		/* UPE and MPE will be handled by normal PROMISC logic
 		 * in e1000e_set_rx_mode */
 		fctrl |= (IXGBE_FCTRL_SBP | /* Receive bad packets */
@@ -4517,10 +4517,15 @@  void ixgbe_set_rx_mode(struct net_device *netdev)
 
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
 
-	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
 		ixgbe_vlan_strip_enable(adapter);
 	else
 		ixgbe_vlan_strip_disable(adapter);
+
+	if (features & NETIF_F_HW_VLAN_CTAG_FILTER)
+		ixgbe_vlan_promisc_disable(adapter);
+	else
+		ixgbe_vlan_promisc_enable(adapter);
 }
 
 static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@@ -8495,11 +8500,6 @@  static int ixgbe_set_features(struct net_device *netdev,
 			adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 	}
 
-	if (features & NETIF_F_HW_VLAN_CTAG_RX)
-		ixgbe_vlan_strip_enable(adapter);
-	else
-		ixgbe_vlan_strip_disable(adapter);
-
 	if (changed & NETIF_F_RXALL)
 		need_reset = true;
 
@@ -8516,6 +8516,9 @@  static int ixgbe_set_features(struct net_device *netdev,
 
 	if (need_reset)
 		ixgbe_do_reset(netdev);
+	else if (changed & (NETIF_F_HW_VLAN_CTAG_RX |
+			    NETIF_F_HW_VLAN_CTAG_FILTER))
+		ixgbe_set_rx_mode(netdev);
 
 	return 0;
 }
@@ -9191,7 +9194,8 @@  skip_sriov:
 			   NETIF_F_HW_CSUM |
 			   NETIF_F_SCTP_CRC |
 			   NETIF_F_HW_VLAN_CTAG_TX |
-			   NETIF_F_HW_VLAN_CTAG_RX;
+			   NETIF_F_HW_VLAN_CTAG_RX |
+			   NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	if (hw->mac.type >= ixgbe_mac_82599EB)
 		netdev->features |= NETIF_F_SCTP_CRC;
@@ -9204,9 +9208,6 @@  skip_sriov:
 	if (hw->mac.type >= ixgbe_mac_82599EB)
 		netdev->hw_features |= NETIF_F_NTUPLE;
 
-	/* set this bit last since it cannot be part of hw_features */
-	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-
 	netdev->vlan_features |= NETIF_F_SG |
 				 NETIF_F_TSO |
 				 NETIF_F_TSO6 |