diff mbox

[27/47] ARM: dts: r8a7793: Reference both DMA controllers in HSCIF nodes

Message ID 91bf5060f94643f81b030b26d3a1a190eb5bfe59.1459732726.git.horms+renesas@verge.net.au
State New
Headers show

Commit Message

Simon Horman April 4, 2016, 1:22 a.m. UTC 
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index d70479085b13..be2e1fdfb07b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -725,8 +725,9 @@ 
 		clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -739,8 +740,9 @@ 
 		clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -753,8 +755,9 @@ 
 		clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};