diff mbox

[U-Boot,2/2] ARM: zynq: Add uEnv.txt support

Message ID 2c2ee5df5569156770008c833a97703e40476bc0.1459414147.git.michal.simek@xilinx.com
State Accepted
Commit 4d1ed9c71561becbb9d612fe584bb6332eb24168
Delegated to: Michal Simek
Headers show

Commit Message

Michal Simek March 31, 2016, 8:49 a.m. UTC 
From: Michal Simek <monstr@monstr.eu>

preboot macro load the uEnv.txt from mmc 0 when bootmode is mmc. uenvcmd is
executed after load of uEnv.txt if it is defined in the uEnv.txt env text
file.

The default importbootenv macro reads the uEnv.txt from mmc.

Additional to this, usb_loadbootenv is added to support loading uEnv.txt
from usb dev 0.

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 include/configs/zynq-common.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox

Patch

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 25ca4769b1ae..d7189d3e123e 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -205,6 +205,9 @@ 
 # define CONFIG_ENV_OFFSET		0xE0000
 #endif
 
+/* enable preboot to be loaded before CONFIG_BOOTDELAY */
+#define CONFIG_PREBOOT
+
 /* Default environment */
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS	\
@@ -215,6 +218,29 @@ 
 	"nor_flash_off=0xE2100000\0"	\
 	"fdt_high=0x20000000\0"		\
 	"initrd_high=0x20000000\0"	\
+	"loadbootenv_addr=0x2000000\0" \
+	"bootenv=uEnv.txt\0" \
+	"bootenv_dev=mmc\0" \
+	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
+		"env import -t ${loadbootenv_addr} $filesize\0" \
+	"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
+	"setbootenv=if env run bootenv_existence_test; then " \
+			"if env run loadbootenv; then " \
+				"env run importbootenv; " \
+			"fi; " \
+		"fi; \0" \
+	"sd_loadbootenv=set bootenv_dev mmc && " \
+			"run setbootenv \0" \
+	"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \
+	"preboot=if test $modeboot = sdboot; then " \
+			"run sd_loadbootenv; " \
+			"echo Checking if uenvcmd is set ...; " \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...; " \
+				"run uenvcmd; " \
+			"fi; " \
+		"fi; \0" \
 	"norboot=echo Copying FIT from NOR flash to RAM... && " \
 		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
 		"bootm ${load_addr}\0" \