@@ -195,8 +195,7 @@ static int desc_list_init(void)
/* allocate a new skb for next time receive */
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
if (!new_skb) {
- printk(KERN_NOTICE DRV_NAME
- ": init: low on mem - packet dropped\n");
+ pr_notice("init: low on mem - packet dropped\n");
goto init_error;
}
skb_reserve(new_skb, NET_IP_ALIGN);
@@ -247,7 +246,7 @@ static int desc_list_init(void)
init_error:
desc_list_free();
- printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
+ pr_err("kmalloc failed\n");
return -ENOMEM;
}
@@ -264,12 +263,11 @@ static int bfin_mdio_poll(void)
/* poll the STABUSY bit */
while ((bfin_read_EMAC_STAADD()) & STABUSY) {
- udelay(1);
if (timeout_cnt-- < 0) {
- printk(KERN_ERR DRV_NAME
- ": wait MDC/MDIO transaction to complete timeout\n");
+ pr_err("wait MDC/MDIO transaction to complete timeout\n");
return -ETIMEDOUT;
}
+ udelay(1);
}
return 0;
@@ -357,9 +355,9 @@ static void bfin_mac_adjust_link(struct net_device *dev)
opmode &= ~(RMII_10);
break;
default:
- printk(KERN_WARNING
- "%s: Ack! Speed (%d) is not 10/100!\n",
- DRV_NAME, phydev->speed);
+ netdev_warn(dev,
+ "Ack! Speed (%d) is not 10/100!\n",
+ phydev->speed);
break;
}
bfin_write_EMAC_OPMODE(opmode);
@@ -383,7 +381,7 @@ static void bfin_mac_adjust_link(struct net_device *dev)
if (new_state) {
u32 opmode = bfin_read_EMAC_OPMODE();
phy_print_status(phydev);
- pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
+ netdev_dbg(dev, "EMAC_OPMODE = 0x%08x\n", opmode);
}
spin_unlock_irqrestore(&lp->lock, flags);
@@ -424,8 +422,7 @@ static int mii_probe(struct net_device *dev)
/* now we are supposed to have a proper phydev to attach to... */
if (!phydev) {
- printk(KERN_INFO "%s: Don't found any phy device at all\n",
- dev->name);
+ netdev_info(dev, "No PHY device found\n");
return -ENODEV;
}
@@ -438,7 +435,7 @@ static int mii_probe(struct net_device *dev)
#endif
if (IS_ERR(phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ netdev_err(dev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
}
@@ -460,11 +457,11 @@ static int mii_probe(struct net_device *dev)
lp->old_duplex = -1;
lp->phydev = phydev;
- printk(KERN_INFO "%s: attached PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
- "@sclk=%dMHz)\n",
- DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
- MDC_CLK, mdc_div, sclk/1000000);
+ netdev_info(dev, "attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
+ "@sclk=%dMHz)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
+ MDC_CLK, mdc_div, sclk/1000000);
return 0;
}
@@ -833,8 +830,7 @@ static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
(--timeout_cnt))
udelay(1);
if (timeout_cnt == 0)
- printk(KERN_ERR DRV_NAME
- ": fails to timestamp the TX packet\n");
+ pr_err("failed to timestamp the TX packet\n");
else {
struct skb_shared_hwtstamps shhwtstamps;
u64 ns;
@@ -1091,8 +1087,7 @@ static void bfin_mac_rx(struct net_device *dev)
* we which case we simply drop the packet
*/
if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
- printk(KERN_NOTICE DRV_NAME
- ": rx: receive error - packet dropped\n");
+ netdev_notice(dev, "rx: receive error - packet dropped\n");
dev->stats.rx_dropped++;
goto out;
}
@@ -1102,8 +1097,7 @@ static void bfin_mac_rx(struct net_device *dev)
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
if (!new_skb) {
- printk(KERN_NOTICE DRV_NAME
- ": rx: low on mem - packet dropped\n");
+ pr_notice("rx: low on mem - packet dropped\n");
dev->stats.rx_dropped++;
goto out;
}
@@ -1226,7 +1220,7 @@ static int bfin_mac_enable(void)
int ret;
u32 opmode;
- pr_debug("%s: %s\n", DRV_NAME, __func__);
+ pr_debug("%s\n", __func__);
/* Set RX DMA */
bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@@ -1268,7 +1262,7 @@ static void bfin_mac_timeout(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
- pr_debug("%s: %s\n", dev->name, __func__);
+ netdev_dbg(dev, "%s\n", __func__);
bfin_mac_disable();
@@ -1335,7 +1329,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
u32 sysctl;
if (dev->flags & IFF_PROMISC) {
- printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
+ netdev_info(dev, "set to promisc mode\n");
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= PR;
bfin_write_EMAC_OPMODE(sysctl);
@@ -1389,7 +1383,7 @@ static int bfin_mac_open(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
int ret;
- pr_debug("%s: %s\n", dev->name, __func__);
+ netdev_dbg(dev, "%s\n", __func__);
/*
* Check that the address is valid. If its not, refuse
@@ -1397,7 +1391,7 @@ static int bfin_mac_open(struct net_device *dev)
* address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
*/
if (!is_valid_ether_addr(dev->dev_addr)) {
- printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
+ netdev_warn(dev, "no valid ethernet hw addr\n");
return -EINVAL;
}
@@ -1415,7 +1409,7 @@ static int bfin_mac_open(struct net_device *dev)
ret = bfin_mac_enable();
if (ret)
return ret;
- pr_debug("hardware init finished\n");
+ netdev_dbg(dev, "hardware init finished\n");
netif_start_queue(dev);
netif_carrier_on(dev);
@@ -1431,7 +1425,7 @@ static int bfin_mac_open(struct net_device *dev)
static int bfin_mac_close(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
- pr_debug("%s: %s\n", dev->name, __func__);
+ netdev_dbg(dev, "%s\n", __func__);
netif_stop_queue(dev);
netif_carrier_off(dev);
Add and use pr_fmt, pr_<level> and netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> --- drivers/net/bfin_mac.c | 56 +++++++++++++++++++++-------------------------- 1 files changed, 25 insertions(+), 31 deletions(-)