[2/5,v4] drm: Add DT bindings documentation for ARC PGU display controller
diff mbox

Message ID 1458838116-24954-3-git-send-email-abrodkin@synopsys.com
State New
Headers show

Commit Message

Alexey Brodkin March 24, 2016, 4:48 p.m. UTC
This add DT bindings documentation for ARC PGU display controller.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
---

Changes v3 -> v4: (addressing Rob's comments)
 * Removed "encoder-slave" from required properties
 * Removed "0x" from node names

Changes v2 -> v3:
 * Reverted back to initial larger version of example
   with minor fixes (thanks Rob for spotting those).

Changes v1 -> v2:
 * Removed everything except PGU node itself.

 .../devicetree/bindings/display/snps,arcpgu.txt    | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt

Comments

Rob Herring March 25, 2016, 2:39 p.m. UTC | #1
On Thu, Mar 24, 2016 at 07:48:33PM +0300, Alexey Brodkin wrote:
> This add DT bindings documentation for ARC PGU display controller.
> 
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-snps-arc@lists.infradead.org
> ---
> 
> Changes v3 -> v4: (addressing Rob's comments)
>  * Removed "encoder-slave" from required properties
>  * Removed "0x" from node names
> 
> Changes v2 -> v3:
>  * Reverted back to initial larger version of example
>    with minor fixes (thanks Rob for spotting those).
> 
> Changes v1 -> v2:
>  * Removed everything except PGU node itself.
> 
>  .../devicetree/bindings/display/snps,arcpgu.txt    | 71 ++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> new file mode 100644
> index 0000000..b126577
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> @@ -0,0 +1,71 @@
> +ARC PGU
> +
> +This is a display controller found on several development boards produced
> +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
> +framebuffer and sends it to a single digital encoder (usually HDMI).
> +
> +Required properties:
> +  - compatible: "snps,arcpgu"
> +  - reg: Physical base address and length of the controller's registers.
> +  - clocks: A list of phandle + clock-specifier pairs, one for each
> +    entry in 'clock-names'.
> +  - clock-names: A list of clock names. For ARC PGU it should contain:
> +      - "pxlclk" for the clock feeding the output PLL of the controller.
> +
> +Required sub-nodes:
> +  - port: The PGU connection to an encoder chip.
> +
> +Example:
> +
> +/ {
> +	...
> +
> +	pgu@XXXXXXXX {
> +		compatible = "snps,arcpgu";
> +		reg = <0xXXXXXXXX 0x400>;
> +		clocks = <&clock_node>;
> +		clock-names = "pxlclk";
> +		encoder-slave = <&encoder_node>;

Still in the example...

Otherwise,

Acked-by: Rob Herring <robh@kernel.org>

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000..b126577
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,71 @@ 
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+  - compatible: "snps,arcpgu"
+  - reg: Physical base address and length of the controller's registers.
+  - clocks: A list of phandle + clock-specifier pairs, one for each
+    entry in 'clock-names'.
+  - clock-names: A list of clock names. For ARC PGU it should contain:
+      - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+  - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+	...
+
+	pgu@XXXXXXXX {
+		compatible = "snps,arcpgu";
+		reg = <0xXXXXXXXX 0x400>;
+		clocks = <&clock_node>;
+		clock-names = "pxlclk";
+		encoder-slave = <&encoder_node>;
+
+		port {
+			pgu_output: endpoint {
+				remote-endpoint = <&hdmi_enc_input>;
+			};
+		};
+	};
+
+	/* HDMI encoder on I2C bus */
+	i2c@XXXXXXXX {
+		compatible = "...";
+
+		encoder_node:hdmi@XX{
+			compatible="...";
+
+			ports {
+				port@0 {
+					reg = <0>;
+					hdmi_enc_input:endpoint {
+						remote-endpoint = <&pgu_output>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_enc_output:endpoint {
+						remote-endpoint = <&hdmi_connector_in>;
+					};
+				};
+			};
+		};
+	}
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_enc_output>;
+			};
+		};
+	};
+};