[RFC,v3,1/3] dt-bindings: soc: Add documentation for the MediaTek GCE unit
diff mbox

Message ID 1458300434-14438-2-git-send-email-hs.liao@mediatek.com
State Not Applicable, archived
Headers show

Commit Message

hs.liao@mediatek.com March 18, 2016, 11:27 a.m. UTC
This adds documentation for the MediaTek Global Command Engine (GCE) unit
found in MT8173 SoCs.

Signed-off-by: HS Liao <hs.liao@mediatek.com>
---
 .../devicetree/bindings/soc/mediatek/gce.txt       |   34 ++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt

Comments

Rob Herring March 20, 2016, 12:58 a.m. UTC | #1
On Fri, Mar 18, 2016 at 07:27:12PM +0800, HS Liao wrote:
> This adds documentation for the MediaTek Global Command Engine (GCE) unit
> found in MT8173 SoCs.
> 
> Signed-off-by: HS Liao <hs.liao@mediatek.com>
> ---
>  .../devicetree/bindings/soc/mediatek/gce.txt       |   34 ++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt

I already acked this. Please add acks when posting subsequent versions.

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
hs.liao@mediatek.com March 21, 2016, 8:10 a.m. UTC | #2
On Sat, 2016-03-19 at 19:58 -0500, Rob Herring wrote:
> On Fri, Mar 18, 2016 at 07:27:12PM +0800, HS Liao wrote:
> > This adds documentation for the MediaTek Global Command Engine (GCE) unit
> > found in MT8173 SoCs.
> > 
> > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > ---
> >  .../devicetree/bindings/soc/mediatek/gce.txt       |   34 ++++++++++++++++++++
> >  1 file changed, 34 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt
> 
> I already acked this. Please add acks when posting subsequent versions.
> 
> Acked-by: Rob Herring <robh@kernel.org>


Hi Rob,

Sorry, I will add acked-by from next version.

Best regards,
HS Liao

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/soc/mediatek/gce.txt b/Documentation/devicetree/bindings/soc/mediatek/gce.txt
new file mode 100644
index 0000000..eff07e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/gce.txt
@@ -0,0 +1,34 @@ 
+MediaTek GCE
+===============
+
+The Global Command Engine (GCE) is used to help read/write registers with
+critical time limitation, such as updating display configuration during the
+vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-gce"
+- reg: Address range of the GCE unit
+- interrupts: The interrupt signal from the GCE block
+- clock: Clocks according to the common clock binding
+- clock-names: Must be "gce" to stand for GCE clock
+
+Required properties for a client device:
+- mediatek,gce: Should point to the respective GCE block
+
+Example:
+
+	gce: gce@10212000 {
+		compatible = "mediatek,mt8173-gce";
+		reg = <0 0x10212000 0 0x1000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_GCE>;
+		clock-names = "gce";
+	};
+
+Example for a client device:
+
+	mmsys: clock-controller@14000000 {
+		compatible = "mediatek,mt8173-mmsys";
+		mediatek,gce = <&gce>;
+		...
+	};