diff mbox

[PATCHv2,18/31] ARM: dts: r8a7791: Reference both DMA controllers in MMCIF node

Message ID 1458045728-4758-19-git-send-email-niklas.soderlund+renesas@ragnatech.se
State New
Headers show

Commit Message

Niklas Söderlund March 15, 2016, 12:41 p.m. UTC 
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7791.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 145c5aa..5f89b58 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -555,8 +555,9 @@ 
 		reg = <0 0xee200000 0 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		reg-io-width = <4>;
 		status = "disabled";