diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.c b/drivers/usb/dwc_otg/dwc_otg_pcd.c
new file mode 100644
index 0000000..9bf663b
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c
@@ -0,0 +1,1758 @@
+/*
+ * DesignWare HS OTG controller driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@apm.com>
+ *
+ * Based on versions provided by APM and Synopsis which are:
+ *	Copyright (C) 2009-2010 AppliedMicro(www.apm.com)
+ * Modified by Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * This file implements the Peripheral Controller Driver.
+ *
+ * The Peripheral Controller Driver (PCD) is responsible for
+ * translating requests from the Function Driver into the appropriate
+ * actions on the DWC_otg controller. It isolates the Function Driver
+ * from the specifics of the controller by providing an API to the
+ * Function Driver.
+ *
+ * The Peripheral Controller Driver for Linux will implement the
+ * Gadget API, so that the existing Gadget drivers can be used.
+ * (Gadget Driver is the Linux terminology for a Function Driver.)
+ *
+ * The Linux Gadget API is defined in the header file linux/usb/gadget.h. The
+ * USB EP operations API is defined in the structure usb_ep_ops and the USB
+ * Controller API is defined in the structure usb_gadget_ops
+ *
+ * An important function of the PCD is managing interrupts generated
+ * by the DWC_otg controller. The implementation of the DWC_otg device
+ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "dwc_otg_driver.h"
+#include "dwc_otg_pcd.h"
+
+/*
+ * Static PCD pointer for use in usb_gadget_register_driver and
+ * usb_gadget_unregister_driver.  Initialized in dwc_otg_pcd_init.
+ */
+static struct dwc_pcd *s_pcd;
+
+static inline int need_stop_srp_timer(struct core_if *core_if)
+{
+	if (core_if->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS ||
+			!core_if->core_params->i2c_enable)
+		return core_if->srp_timer_started ? 1 : 0;
+	return 0;
+}
+
+/**
+ * Tests if the module is set to FS or if the PHY_TYPE is FS. If so, then the
+ * gadget should not report as dual-speed capable.
+ */
+static inline int check_is_dual_speed(struct core_if *core_if)
+{
+	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL ||
+			(core_if->hwcfg2.b.hs_phy_type == 2 &&
+			core_if->hwcfg2.b.fs_phy_type == 1 &&
+			core_if->core_params->ulpi_fs_ls))
+		return 0;
+	return 1;
+}
+
+/**
+ * Tests if driver is OTG capable.
+ */
+static inline int check_is_otg(struct core_if *core_if)
+{
+	if (core_if->hwcfg2.b.op_mode ==
+			DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+			core_if->hwcfg2.b.op_mode ==
+			DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST ||
+			core_if->hwcfg2.b.op_mode ==
+			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+			core_if->hwcfg2.b.op_mode ==
+			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)
+		return 0;
+	return 1;
+}
+
+/**
+ * This function completes a request. It calls the request call back.
+ */
+void request_done(struct pcd_ep *ep, struct pcd_request *req, int status)
+{
+	unsigned stopped = ep->stopped;
+
+	list_del_init(&req->queue);
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (GET_CORE_IF(ep->pcd)->dma_enable) {
+		if (req->mapped) {
+			dma_unmap_single(ep->pcd->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				ep->dwc_ep.is_in ? DMA_TO_DEVICE :
+				DMA_FROM_DEVICE);
+			req->req.dma = DMA_ADDR_INVALID;
+			req->mapped = 0;
+		} else {
+			dma_sync_single_for_cpu(ep->pcd->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				ep->dwc_ep.is_in ? DMA_TO_DEVICE :
+				DMA_FROM_DEVICE);
+		}
+	}
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&ep->pcd->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&ep->pcd->lock);
+
+	if (ep->pcd->request_pending > 0)
+		--ep->pcd->request_pending;
+	ep->stopped = stopped;
+
+	/*
+	 * Added-sr: 2007-07-26
+	 *
+	 * Finally, when the current request is done, mark this endpoint
+	 * as not active, so that new requests can be processed.
+	 */
+	if (dwc_has_feature(GET_CORE_IF(ep->pcd), DWC_LIMITED_XFER))
+		ep->dwc_ep.active = 0;
+}
+
+/**
+ * This function terminates all the requsts in the EP request queue.
+ */
+void request_nuke(struct pcd_ep *ep)
+{
+	struct pcd_request *req;
+
+	ep->stopped = 1;
+
+	/* called with irqs blocked?? */
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pcd_request, queue);
+		request_done(ep, req, -ESHUTDOWN);
+	}
+}
+
+/*
+ * The following sections briefly describe the behavior of the Gadget
+ * API endpoint operations implemented in the DWC_otg driver
+ * software. Detailed descriptions of the generic behavior of each of
+ * these functions can be found in the Linux header file
+ * include/linux/usb_gadget.h.
+ *
+ * The Gadget API provides wrapper functions for each of the function
+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
+ * function, which then calls the underlying PCD function. The
+ * following sections are named according to the wrapper
+ * functions. Within each section, the corresponding DWC_otg PCD
+ * function name is specified.
+ *
+ */
+
+/**
+ * This function assigns periodic Tx FIFO to an periodic EP in shared Tx FIFO
+ * mode
+ */
+static u32 assign_perio_tx_fifo(struct core_if *core_if)
+{
+	u32 mask = 1;
+	u32 i;
+
+	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) {
+		if (!(mask & core_if->p_tx_msk)) {
+			core_if->p_tx_msk |= mask;
+			return i + 1;
+		}
+		mask <<= 1;
+	}
+	return 0;
+}
+
+/**
+ * This function releases periodic Tx FIFO in shared Tx FIFO mode
+ */
+static void release_perio_tx_fifo(struct core_if *core_if, u32 fifo_num)
+{
+	core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1)))
+				^ core_if->p_tx_msk;
+}
+
+/**
+ * This function assigns periodic Tx FIFO to an periodic EP in shared Tx FIFO
+ * mode
+ */
+static u32 assign_tx_fifo(struct core_if *core_if)
+{
+	u32 mask = 1;
+	u32 i;
+
+	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) {
+		if (!(mask & core_if->tx_msk)) {
+			core_if->tx_msk |= mask;
+			return i + 1;
+		}
+		mask <<= 1;
+	}
+	return 0;
+}
+
+/**
+ * This function releases periodic Tx FIFO in shared Tx FIFO mode
+ */
+static void release_tx_fifo(struct core_if *core_if, u32 fifo_num)
+{
+	core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1)))
+				^ core_if->tx_msk;
+}
+
+/**
+ * Sets an in endpoint's tx fifo based on the hardware configuration.
+ */
+static void set_in_ep_tx_fifo(struct dwc_pcd *pcd, struct pcd_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	if (pcd->otg_dev->core_if->en_multiple_tx_fifo) {
+		ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
+	} else {
+		ep->dwc_ep.tx_fifo_num = 0;
+
+		/* If ISOC EP then assign a Periodic Tx FIFO. */
+		if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_ISOC)
+			ep->dwc_ep.tx_fifo_num =
+				assign_perio_tx_fifo(pcd->otg_dev->core_if);
+	}
+}
+
+/**
+ * This function activates an EP.  The Device EP control register for
+ * the EP is configured as defined in the ep structure.  Note: This function is
+ * not used for EP0.
+ */
+void dwc_otg_ep_activate(struct core_if *core_if, struct dwc_ep *ep)
+{
+	struct device_if *dev_if = core_if->dev_if;
+	union depctl_data depctl;
+	u32 *addr;
+	union daint_data daintmsk = {.d32 = 0};
+
+	/* Read DEPCTLn register */
+	if (ep->is_in == 1) {
+		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
+		daintmsk.ep.in = 1 << ep->num;
+	} else {
+		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
+		daintmsk.ep.out = 1 << ep->num;
+	}
+
+	/* If the EP is already active don't change the EP Control register */
+	depctl.d32 = dwc_read_reg32(addr);
+	if (!depctl.b.usbactep) {
+		depctl.b.mps = ep->maxpacket;
+		depctl.b.eptype = ep->type;
+		depctl.b.txfnum = ep->tx_fifo_num;
+		depctl.b.setd0pid = 1;
+		depctl.b.usbactep = 1;
+		dwc_write_reg32(addr, depctl.d32);
+	}
+
+	/* Enable the Interrupt for this EP */
+	dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk, 0, daintmsk.d32);
+
+	ep->stall_clear_flag = 0;
+}
+/**
+ * This function is called by the Gadget Driver for each EP to be
+ * configured for the current configuration (SET_CONFIGURATION).
+ *
+ * This function initializes the dwc_otg_ep_t data structure, and then
+ * calls dwc_otg_ep_activate.
+ */
+static int dwc_otg_pcd_ep_enable(struct usb_ep *_ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	struct pcd_ep *ep = NULL;
+	struct dwc_pcd *pcd = NULL;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct pcd_ep, ep);
+	if (!_ep || !desc || ep->desc || desc->bDescriptorType !=
+			USB_DT_ENDPOINT) {
+		printk(KERN_WARNING "%s, bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+
+	if (ep == &ep->pcd->ep0) {
+		printk(KERN_WARNING "%s, bad ep(0)\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Check FIFO size */
+	if (!desc->wMaxPacketSize) {
+		printk(KERN_WARNING "%s, bad %s maxpacket\n", __func__,
+				_ep->name);
+		return -ERANGE;
+	}
+
+	pcd = ep->pcd;
+	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
+		printk(KERN_WARNING "%s, bogus device state\n", __func__);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&pcd->lock, flags);
+	ep->desc = desc;
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+	/* Activate the EP */
+	ep->stopped = 0;
+	ep->dwc_ep.is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
+	ep->dwc_ep.maxpacket = ep->ep.maxpacket;
+	ep->dwc_ep.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	if (ep->dwc_ep.is_in)
+		set_in_ep_tx_fifo(pcd, ep, desc);
+
+	/* Set initial data PID. */
+	if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_BULK)
+		ep->dwc_ep.data_pid_start = 0;
+
+	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
+	spin_unlock_irqrestore(&pcd->lock, flags);
+	return 0;
+}
+
+/**
+ * This function deactivates an EP.  This is done by clearing the USB Active EP
+ * bit in the Device EP control register.  Note: This function is not used for
+ * EP0. EP0 cannot be deactivated.
+ */
+static void dwc_otg_ep_deactivate(struct core_if *core_if, struct dwc_ep *ep)
+{
+	union depctl_data depctl = {.d32 = 0};
+	u32 *addr;
+	union daint_data daintmsk = {.d32 = 0};
+
+	/* Read DEPCTLn register */
+	if (ep->is_in == 1) {
+		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
+		daintmsk.ep.in = 1 << ep->num;
+	} else {
+		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
+		daintmsk.ep.out = 1 << ep->num;
+	}
+
+	depctl.b.usbactep = 0;
+	dwc_write_reg32(addr, depctl.d32);
+
+	/* Disable the Interrupt for this EP */
+	dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
+			daintmsk.d32, 0);
+}
+/**
+ * This function is called when an EP is disabled due to disconnect or
+ * change in configuration. Any pending requests will terminate with a
+ * status of -ESHUTDOWN.
+ *
+ * This function modifies the dwc_otg_ep_t data structure for this EP,
+ * and then calls dwc_otg_ep_deactivate.
+ */
+static int dwc_otg_pcd_ep_disable(struct usb_ep *_ep)
+{
+	struct pcd_ep *ep;
+	struct core_if *core_if;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct pcd_ep, ep);
+	if (!_ep || !ep->desc)
+		return -EINVAL;
+
+	core_if = ep->pcd->otg_dev->core_if;
+
+	spin_lock_irqsave(&ep->pcd->lock, flags);
+
+	request_nuke(ep);
+	dwc_otg_ep_deactivate(core_if, &ep->dwc_ep);
+
+	ep->desc = NULL;
+	ep->stopped = 1;
+	if (ep->dwc_ep.is_in) {
+		release_perio_tx_fifo(core_if, ep->dwc_ep.tx_fifo_num);
+		release_tx_fifo(core_if, ep->dwc_ep.tx_fifo_num);
+	}
+
+	spin_unlock_irqrestore(&ep->pcd->lock, flags);
+
+	return 0;
+}
+
+/**
+ * This function allocates a request object to use with the specified
+ * endpoint.
+ */
+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *_ep,
+				gfp_t gfp_flags)
+{
+	struct pcd_request *req;
+
+	if (!_ep) {
+		printk(KERN_WARNING "%s() Invalid EP\n", __func__);
+		return 0;
+	}
+
+	req = kzalloc(sizeof(struct pcd_request), gfp_flags);
+	if (!req) {
+		printk(KERN_WARNING "%s() request allocation failed\n",
+				__func__);
+		return 0;
+	}
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+/**
+ * This function frees a request object.
+ */
+static void dwc_otg_pcd_free_request(struct usb_ep *_ep,
+				     struct usb_request *_req)
+{
+	struct pcd_request *req;
+
+	if (!_ep || !_req) {
+		printk(KERN_WARNING "%s() nvalid ep or req argument\n",
+			__func__);
+		return;
+	}
+
+	req = container_of(_req, struct pcd_request, req);
+	kfree(req);
+}
+
+/*
+ * In dedicated Tx FIFO mode, enable the Non-Periodic Tx FIFO empty interrupt.
+ * Otherwise, enable the Tx FIFO epmty interrupt. The data will be written into
+ * the fifo by the ISR.
+ */
+static void enable_tx_fifo_empty_intr(struct core_if *c_if, struct dwc_ep *ep)
+{
+	union gintmsk_data intr_mask = {.d32 = 0};
+	struct device_if *d_if = c_if->dev_if;
+	struct core_global_regs *glbl_regs = c_if->core_global_regs;
+
+	if (!c_if->en_multiple_tx_fifo) {
+		intr_mask.b.nptxfempty = 1;
+		dwc_modify_reg32(&glbl_regs->gintsts, intr_mask.d32, 0);
+		dwc_modify_reg32(&glbl_regs->gintmsk, intr_mask.d32,
+					intr_mask.d32);
+	} else if (ep->xfer_len) {
+		/* Enable the Tx FIFO Empty Interrupt for this EP */
+		u32 fifoemptymsk = 1 << ep->num;
+		dwc_modify_reg32(&d_if->dev_global_regs->dtknqr4_fifoemptymsk,
+					0, fifoemptymsk);
+	}
+}
+
+static void set_next_ep(struct device_if *dev_if, u8 num)
+{
+	union depctl_data depctl;
+
+	depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
+	depctl.b.nextep = num;
+
+	dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, depctl.d32);
+}
+
+/**
+ * This function does the setup for a data transfer for an EP and
+ * starts the transfer.  For an IN transfer, the packets will be loaded into the
+ * appropriate Tx FIFO in the ISR. For OUT transfers, the packets are unloaded
+ * from the Rx FIFO in the ISR.
+ *
+ */
+void dwc_otg_ep_start_transfer(struct core_if *c_if, struct dwc_ep *ep)
+{
+	union depctl_data depctl;
+	union deptsiz_data deptsiz;
+	struct device_if *d_if = c_if->dev_if;
+	struct core_global_regs *glbl_regs = c_if->core_global_regs;
+
+	if (ep->is_in) {
+		struct device_in_ep_regs *in_regs = d_if->in_ep_regs[ep->num];
+		union gnptxsts_data gtxstatus;
+		gtxstatus.d32 = dwc_read_reg32(&glbl_regs->gnptxsts);
+
+		if (!c_if->en_multiple_tx_fifo && !gtxstatus.b.nptxqspcavail)
+			return;
+
+		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
+		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
+
+		/* Zero Length Packet? */
+		if (!ep->xfer_len) {
+			deptsiz.b.xfersize = 0;
+			deptsiz.b.pktcnt = 1;
+		} else {
+			/*
+			 * Program the transfer size and packet count as
+			 * follows:
+			 *
+			 * xfersize = N * maxpacket + short_packet
+			 * pktcnt = N + (short_packet exist ? 1 : 0)
+			 */
+
+			/*
+			 * Added-sr: 2007-07-26
+			 *
+			 * Since the 405EZ (Ultra) only support 2047 bytes as
+			 * max transfer size, we have to split up bigger
+			 * transfers into multiple transfers of 1024 bytes sized
+			 * messages. I happens often, that transfers of 4096
+			 * bytes are required (zero-gadget,
+			 * file_storage-gadget).
+			 */
+			if (dwc_has_feature(c_if, DWC_LIMITED_XFER)) {
+				if (ep->xfer_len > MAX_XFER_LEN) {
+					ep->bytes_pending = ep->xfer_len
+						- MAX_XFER_LEN;
+					ep->xfer_len = MAX_XFER_LEN;
+				}
+			}
+
+			deptsiz.b.xfersize = ep->xfer_len;
+			deptsiz.b.pktcnt = (ep->xfer_len - 1 + ep->maxpacket) /
+						ep->maxpacket;
+		}
+		dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
+
+		if (c_if->dma_enable)
+			dwc_write_reg32(&in_regs->diepdma, ep->dma_addr);
+		else if (ep->type != DWC_OTG_EP_TYPE_ISOC)
+			enable_tx_fifo_empty_intr(c_if, ep);
+
+		/* EP enable, IN data in FIFO */
+		depctl.b.cnak = 1;
+		depctl.b.epena = 1;
+		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
+
+		if (c_if->dma_enable)
+			set_next_ep(d_if, ep->num);
+	} else {
+		struct device_out_ep_regs *out_regs =
+			d_if->out_ep_regs[ep->num];
+
+		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
+		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
+
+		/*
+		 * Program the transfer size and packet count as follows:
+		 *
+		 * pktcnt = N
+		 * xfersize = N * maxpacket
+		 */
+		if (!ep->xfer_len) {
+			deptsiz.b.xfersize = ep->maxpacket;
+			deptsiz.b.pktcnt = 1;
+		} else {
+			deptsiz.b.pktcnt = (ep->xfer_len + ep->maxpacket - 1) /
+					ep->maxpacket;
+			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
+		}
+		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
+
+		if (c_if->dma_enable)
+			dwc_write_reg32(&out_regs->doepdma, ep->dma_addr);
+
+		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
+			if (ep->even_odd_frame)
+				depctl.b.setd1pid = 1;
+			else
+				depctl.b.setd0pid = 1;
+		}
+
+		/* EP enable */
+		depctl.b.cnak = 1;
+		depctl.b.epena = 1;
+		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
+	}
+}
+
+/**
+ * This function does the setup for a data transfer for EP0 and starts
+ * the transfer.  For an IN transfer, the packets will be loaded into
+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
+ * unloaded from the Rx FIFO in the ISR.
+ */
+void dwc_otg_ep0_start_transfer(struct core_if *c_if, struct dwc_ep *ep)
+{
+	union depctl_data depctl;
+	union deptsiz0_data deptsiz;
+	struct device_if *d_if = c_if->dev_if;
+	struct core_global_regs *glbl_regs = c_if->core_global_regs;
+
+	ep->total_len = ep->xfer_len;
+
+	if (ep->is_in) {
+		struct device_in_ep_regs *in_regs = d_if->in_ep_regs[0];
+		union gnptxsts_data gtxstatus;
+
+		gtxstatus.d32 = dwc_read_reg32(&glbl_regs->gnptxsts);
+
+		if (!c_if->en_multiple_tx_fifo && !gtxstatus.b.nptxqspcavail)
+			return;
+
+		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
+		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
+
+		/* Zero Length Packet? */
+		if (!ep->xfer_len) {
+			deptsiz.b.xfersize = 0;
+			deptsiz.b.pktcnt = 1;
+		} else {
+			/*
+			 * Program the transfer size and packet count  as
+			 * follows:
+			 *
+			 *  xfersize = N * maxpacket + short_packet
+			 *  pktcnt = N + (short_packet exist ? 1 : 0)
+			 */
+			if (ep->xfer_len > ep->maxpacket) {
+				ep->xfer_len = ep->maxpacket;
+				deptsiz.b.xfersize = ep->maxpacket;
+			} else {
+				deptsiz.b.xfersize = ep->xfer_len;
+			}
+			deptsiz.b.pktcnt = 1;
+		}
+		dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
+
+		if (c_if->dma_enable)
+			dwc_write_reg32(&in_regs->diepdma, ep->dma_addr);
+
+		/* EP enable, IN data in FIFO */
+		depctl.b.cnak = 1;
+		depctl.b.epena = 1;
+		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
+
+		if (!c_if->dma_enable)
+			enable_tx_fifo_empty_intr(c_if, ep);
+	} else {
+		struct device_out_ep_regs *out_regs =
+			d_if->out_ep_regs[ep->num];
+
+		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
+		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
+
+		/*
+		 * Program the transfer size and packet count as follows:
+		 *
+		 * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
+		 * pktcnt = N
+		 */
+		if (!ep->xfer_len) {
+			deptsiz.b.xfersize = ep->maxpacket;
+			deptsiz.b.pktcnt = 1;
+		} else {
+			deptsiz.b.pktcnt = (ep->xfer_len + ep->maxpacket - 1) /
+						ep->maxpacket;
+			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
+		}
+		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
+
+		if (c_if->dma_enable)
+			dwc_write_reg32(&out_regs->doepdma, ep->dma_addr);
+
+		/* EP enable */
+		depctl.b.cnak = 1;
+		depctl.b.epena = 1;
+		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
+	}
+}
+
+/**
+ * This function is used to submit an I/O Request to an EP.
+ *
+ *	- When the request completes the request's completion callback
+ *	  is called to return the request to the driver.
+ *	- An EP, except control EPs, may have multiple requests
+ *	  pending.
+ *	- Once submitted the request cannot be examined or modified.
+ *	- Each request is turned into one or more packets.
+ *	- A BULK EP can queue any amount of data; the transfer is
+ *	  packetized.
+ *	- Zero length Packets are specified with the request 'zero'
+ *	  flag.
+ */
+static int dwc_otg_pcd_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+				gfp_t gfp_flags)
+{
+	int prevented = 0;
+	struct pcd_request *req;
+	struct pcd_ep *ep;
+	struct dwc_pcd *pcd;
+	struct core_if *core_if;
+	unsigned long flags = 0;
+
+	req = container_of(_req, struct pcd_request, req);
+	if (!_req || !_req->complete || !_req->buf ||
+			!list_empty(&req->queue)) {
+		printk(KERN_WARNING "%s, bad params\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct pcd_ep, ep);
+	if (!_ep || (!ep->desc && ep->dwc_ep.num != 0)) {
+		printk(KERN_WARNING "%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+
+	pcd = ep->pcd;
+	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
+		printk(KERN_WARNING "%s, bogus device state\n", __func__);
+		return -ESHUTDOWN;
+	}
+	core_if = pcd->otg_dev->core_if;
+
+	if (!core_if->core_params->opt) {
+		if (ep->dwc_ep.num != 0) {
+			printk(KERN_ERR "%s queue req %p, len %d buf %p\n",
+				_ep->name, _req, _req->length, _req->buf);
+		}
+	}
+
+	if (GET_CORE_IF(pcd)->dma_enable) {
+		if (_req->dma == DMA_ADDR_INVALID) {
+			_req->dma = dma_map_single(pcd->gadget.dev.parent,
+				_req->buf, _req->length, ep->dwc_ep.is_in ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE);
+			req->mapped = 1;
+		} else {
+			dma_sync_single_for_device(pcd->gadget.dev.parent,
+				_req->dma, _req->length, ep->dwc_ep.is_in ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE);
+			req->mapped = 0;
+		}
+	}
+
+	spin_lock_irqsave(&ep->pcd->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* Start the transfer */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		/* EP0 Transfer? */
+		if (ep->dwc_ep.num == 0) {
+			switch (pcd->ep0state) {
+			case EP0_IN_DATA_PHASE:
+				break;
+			case EP0_OUT_DATA_PHASE:
+				if (pcd->request_config) {
+					/* Complete STATUS PHASE */
+					ep->dwc_ep.is_in = 1;
+					pcd->ep0state = EP0_STATUS;
+				}
+				break;
+			default:
+				spin_unlock_irqrestore(&pcd->lock, flags);
+				return -EL2HLT;
+			}
+
+			ep->dwc_ep.dma_addr = _req->dma;
+			ep->dwc_ep.start_xfer_buff = _req->buf;
+			ep->dwc_ep.xfer_buff = _req->buf;
+			ep->dwc_ep.xfer_len = _req->length;
+			ep->dwc_ep.xfer_count = 0;
+			ep->dwc_ep.sent_zlp = 0;
+			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
+
+			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
+		} else {
+			/* Setup and start the Transfer */
+			ep->dwc_ep.dma_addr = _req->dma;
+			ep->dwc_ep.start_xfer_buff = _req->buf;
+			ep->dwc_ep.xfer_buff = _req->buf;
+			ep->dwc_ep.xfer_len = _req->length;
+			ep->dwc_ep.xfer_count = 0;
+			ep->dwc_ep.sent_zlp = 0;
+			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
+
+			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
+		}
+	}
+
+	if (req || prevented) {
+		++pcd->request_pending;
+		list_add_tail(&req->queue, &ep->queue);
+
+		if (ep->dwc_ep.is_in && ep->stopped && !core_if->dma_enable) {
+			/*
+			 *  Device IN endpoint interrupt mask register is laid
+			 *  out exactly the same as the device IN endpoint
+			 *  interrupt register.
+			 */
+			union diepint_data diepmsk = {.d32 = 0};
+			diepmsk.b.intktxfemp = 1;
+
+			dwc_modify_reg32(
+				&core_if->dev_if->dev_global_regs->diepmsk,
+				0, diepmsk.d32);
+		}
+	}
+
+	spin_unlock_irqrestore(&pcd->lock, flags);
+	return 0;
+}
+
+/**
+ * This function cancels an I/O request from an EP.
+ */
+static int dwc_otg_pcd_ep_dequeue(struct usb_ep *_ep,
+				  struct usb_request *_req)
+{
+	struct pcd_request *req;
+	struct pcd_ep *ep;
+	struct dwc_pcd *pcd;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct pcd_ep, ep);
+	if (!_ep || !_req || (!ep->desc && ep->dwc_ep.num != 0)) {
+		printk(KERN_WARNING "%s, bad argument\n", __func__);
+		return -EINVAL;
+	}
+
+	pcd = ep->pcd;
+	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
+		printk(KERN_WARNING "%s, bogus device state\n", __func__);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&pcd->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue)
+		if (&req->req == _req)
+			break;
+
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&pcd->lock, flags);
+		return -EINVAL;
+	}
+
+	if (!list_empty(&req->queue))
+		request_done(ep, req, -ECONNRESET);
+	else
+		req = 0;
+
+	spin_unlock_irqrestore(&pcd->lock, flags);
+
+	return req ? 0 : -EOPNOTSUPP;
+}
+
+/**
+ * Set the EP STALL.
+ */
+void dwc_otg_ep_set_stall(struct core_if *core_if, struct dwc_ep *ep)
+{
+	union depctl_data depctl;
+	u32 *depctl_addr;
+
+	if (ep->is_in) {
+		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
+		depctl.d32 = dwc_read_reg32(depctl_addr);
+
+		/* set the disable and stall bits */
+		if (depctl.b.epena)
+			depctl.b.epdis = 1;
+		depctl.b.stall = 1;
+		dwc_write_reg32(depctl_addr, depctl.d32);
+	} else {
+		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
+		depctl.d32 = dwc_read_reg32(depctl_addr);
+
+		/* set the stall bit */
+		depctl.b.stall = 1;
+		dwc_write_reg32(depctl_addr, depctl.d32);
+	}
+}
+
+/**
+ * Clear the EP STALL.
+ */
+void dwc_otg_ep_clear_stall(struct core_if *core_if, struct dwc_ep *ep)
+{
+	union depctl_data depctl;
+	u32 *depctl_addr;
+
+	if (ep->is_in == 1)
+		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
+	else
+		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
+
+	depctl.d32 = dwc_read_reg32(depctl_addr);
+
+	/* clear the stall bits */
+	depctl.b.stall = 0;
+
+	/*
+	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
+	 * of whether an endpoint has the Halt feature set, a
+	 * ClearFeature(ENDPOINT_HALT) request always results in the
+	 * data toggle being reinitialized to DATA0.
+	 */
+	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
+			ep->type == DWC_OTG_EP_TYPE_BULK)
+		depctl.b.setd0pid = 1;	/* DATA0 */
+
+	dwc_write_reg32(depctl_addr, depctl.d32);
+}
+
+/**
+ * usb_ep_set_halt stalls an endpoint.
+ *
+ * usb_ep_clear_halt clears an endpoint halt and resets its data
+ * toggle.
+ *
+ * Both of these functions are implemented with the same underlying
+ * function. The behavior depends on the val argument:
+ *	- 0 means clear_halt.
+ *	- 1 means set_halt,
+ *	- 2 means clear stall lock flag.
+ *	- 3 means set  stall lock flag.
+ */
+static int dwc_otg_pcd_ep_set_halt(struct usb_ep *_ep, int val)
+{
+	int retval = 0;
+	unsigned long flags;
+	struct pcd_ep *ep = NULL;
+
+	ep = container_of(_ep, struct pcd_ep, ep);
+	if (!_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
+			ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		printk(KERN_WARNING "%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ep->pcd->lock, flags);
+
+	if (ep->dwc_ep.is_in && !list_empty(&ep->queue)) {
+		printk(KERN_WARNING "%s() %s XFer In process\n", __func__,
+				_ep->name);
+		retval = -EAGAIN;
+	} else if (val == 0) {
+		dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep);
+	} else if (val == 1) {
+		if (ep->dwc_ep.num == 0)
+			ep->pcd->ep0state = EP0_STALL;
+
+		ep->stopped = 1;
+		dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep);
+	} else if (val == 2) {
+		ep->dwc_ep.stall_clear_flag = 0;
+	} else if (val == 3) {
+		ep->dwc_ep.stall_clear_flag = 1;
+	}
+
+	spin_unlock_irqrestore(&ep->pcd->lock, flags);
+	return retval;
+}
+
+static struct usb_ep_ops dwc_otg_pcd_ep_ops = {
+	.enable = dwc_otg_pcd_ep_enable,
+	.disable = dwc_otg_pcd_ep_disable,
+	.alloc_request = dwc_otg_pcd_alloc_request,
+	.free_request = dwc_otg_pcd_free_request,
+	.queue = dwc_otg_pcd_ep_queue,
+	.dequeue = dwc_otg_pcd_ep_dequeue,
+	.set_halt = dwc_otg_pcd_ep_set_halt,
+	.fifo_status = 0,
+	.fifo_flush = 0,
+};
+
+/**
+ * Gets the current USB frame number from the DTS register. This is the frame
+ * number from the last SOF packet.
+ */
+static u32 dwc_otg_get_frame_number(struct core_if *core_if)
+{
+	union dsts_data dsts;
+	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
+	return dsts.b.soffn;
+}
+/**
+ * The following gadget operations will be implemented in the DWC_otg
+ * PCD. Functions in the API that are not described below are not
+ * implemented.
+ *
+ * The Gadget API provides wrapper functions for each of the function
+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
+ * wrapper function, which then calls the underlying PCD function. The
+ * following sections are named according to the wrapper functions
+ * (except for ioctl, which doesn't have a wrapper function). Within
+ * each section, the corresponding DWC_otg PCD function name is
+ * specified.
+ *
+ */
+
+/**
+ *Gets the USB Frame number of the last SOF.
+ */
+static int dwc_otg_pcd_get_frame(struct usb_gadget *_gadget)
+{
+	struct dwc_pcd *pcd;
+
+	if (!_gadget) {
+		return -ENODEV;
+	} else {
+		pcd = container_of(_gadget, struct dwc_pcd, gadget);
+		dwc_otg_get_frame_number(GET_CORE_IF(pcd));
+	}
+
+	return 0;
+}
+
+/**
+ * This function is called when the SRP timer expires.  The SRP should complete
+ * within 6 seconds.
+ */
+static void srp_timeout(unsigned long data)
+{
+	union gotgctl_data gotgctl;
+	struct dwc_pcd *pcd = (struct dwc_pcd *)data;
+	struct core_if *core_if = pcd->otg_dev->core_if;
+	u32 *addr = otg_ctl_reg(pcd);
+
+	gotgctl.d32 = dwc_read_reg32(addr);
+	core_if->srp_timer_started = 0;
+
+	if (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS &&
+			core_if->core_params->i2c_enable) {
+		printk(KERN_INFO "SRP Timeout\n");
+
+		if (core_if->srp_success && gotgctl.b.bsesvld) {
+			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup)
+				core_if->pcd_cb->resume_wakeup(
+						core_if->pcd_cb->p);
+
+			/* Clear Session Request */
+			gotgctl.d32 = 0;
+			gotgctl.b.sesreq = 1;
+			dwc_modify_reg32(addr, gotgctl.d32, 0);
+
+			core_if->srp_success = 0;
+		} else {
+			printk(KERN_ERR "Device not connected/responding\n");
+			gotgctl.b.sesreq = 0;
+			dwc_write_reg32(addr, gotgctl.d32);
+		}
+	} else if (gotgctl.b.sesreq) {
+		printk(KERN_INFO "SRP Timeout\n");
+		printk(KERN_ERR "Device not connected/responding\n");
+
+		gotgctl.b.sesreq = 0;
+		dwc_write_reg32(addr, gotgctl.d32);
+	} else {
+		printk(KERN_INFO " SRP GOTGCTL=%0x\n", gotgctl.d32);
+	}
+}
+
+
+
+/**
+ * Start the SRP timer to detect when the SRP does not complete within
+ * 6 seconds.
+ */
+static void dwc_otg_pcd_start_srp_timer(struct dwc_pcd *pcd)
+{
+	struct timer_list *srp_timer = &pcd->srp_timer;
+
+	GET_CORE_IF(pcd)->srp_timer_started = 1;
+
+	init_timer(srp_timer);
+	srp_timer->function = srp_timeout;
+	srp_timer->data = (unsigned long)pcd;
+	srp_timer->expires = jiffies + (HZ * 6);
+
+	add_timer(srp_timer);
+}
+
+static void dwc_otg_pcd_initiate_srp(struct dwc_pcd *pcd)
+{
+	union gotgctl_data mem;
+	union gotgctl_data val;
+	u32 *addr = otg_ctl_reg(pcd);
+
+	val.d32 = dwc_read_reg32(addr);
+	if (val.b.sesreq) {
+		printk(KERN_ERR "Session Request Already active!\n");
+		return;
+	}
+
+	printk(KERN_NOTICE "Session Request Initated\n");
+	mem.d32 = dwc_read_reg32(addr);
+	mem.b.sesreq = 1;
+	dwc_write_reg32(addr, mem.d32);
+
+	/* Start the SRP timer */
+	dwc_otg_pcd_start_srp_timer(pcd);
+	return;
+}
+
+static void dwc_otg_pcd_remote_wakeup(struct dwc_pcd *pcd, int set)
+{
+	union dctl_data dctl = {.d32 = 0};
+	u32 *addr = dev_ctl_reg(pcd);
+
+	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
+		if (pcd->remote_wakeup_enable) {
+			if (set) {
+				dctl.b.rmtwkupsig = 1;
+				dwc_modify_reg32(addr, 0, dctl.d32);
+				msleep(1);
+				dwc_modify_reg32(addr, dctl.d32, 0);
+			}
+		}
+	}
+}
+
+/**
+ * Initiates Session Request Protocol (SRP) to wakeup the host if no
+ * session is in progress. If a session is already in progress, but
+ * the device is suspended, remote wakeup signaling is started.
+ *
+ */
+static int dwc_otg_pcd_wakeup(struct usb_gadget *_gadget)
+{
+	unsigned long flags;
+	struct dwc_pcd *pcd;
+	union dsts_data dsts;
+	union gotgctl_data gotgctl;
+
+	if (!_gadget)
+		return -ENODEV;
+	else
+		pcd = container_of(_gadget, struct dwc_pcd, gadget);
+
+	spin_lock_irqsave(&pcd->lock, flags);
+
+	/*
+	 * This function starts the Protocol if no session is in progress. If
+	 * a session is already in progress, but the device is suspended,
+	 * remote wakeup signaling is started.
+	 */
+
+	/* Check if valid session */
+	gotgctl.d32 = dwc_read_reg32(otg_ctl_reg(pcd));
+	if (gotgctl.b.bsesvld) {
+		/* Check if suspend state */
+		dsts.d32 = dwc_read_reg32(dev_sts_reg(pcd));
+		if (dsts.b.suspsts)
+			dwc_otg_pcd_remote_wakeup(pcd, 1);
+	} else {
+		dwc_otg_pcd_initiate_srp(pcd);
+	}
+
+	spin_unlock_irqrestore(&pcd->lock, flags);
+	return 0;
+}
+
+static const struct usb_gadget_ops dwc_otg_pcd_ops = {
+	.get_frame = dwc_otg_pcd_get_frame,
+	.wakeup = dwc_otg_pcd_wakeup,
+	/* not selfpowered */
+};
+
+/**
+ * This function updates the otg values in the gadget structure.
+ */
+void dwc_otg_pcd_update_otg(struct dwc_pcd *pcd, const unsigned reset)
+{
+	if (!pcd->gadget.is_otg)
+		return;
+
+	if (reset) {
+		pcd->b_hnp_enable = 0;
+		pcd->a_hnp_support = 0;
+		pcd->a_alt_hnp_support = 0;
+	}
+
+	pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
+	pcd->gadget.a_hnp_support = pcd->a_hnp_support;
+	pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
+}
+
+/**
+ * This function is the top level PCD interrupt handler.
+ */
+static irqreturn_t dwc_otg_pcd_irq(int _irq, void *dev)
+{
+	struct dwc_pcd *pcd = dev;
+	int retval = IRQ_NONE;
+
+	retval = dwc_otg_pcd_handle_intr(pcd);
+	return IRQ_RETVAL(retval);
+}
+
+/**
+ * PCD Callback function for initializing the PCD when switching to
+ * device mode.
+ */
+static int dwc_otg_pcd_start_cb(void *_p)
+{
+	struct dwc_pcd *pcd = (struct dwc_pcd *)_p;
+
+	/* Initialize the Core for Device mode. */
+	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd)))
+		dwc_otg_core_dev_init(GET_CORE_IF(pcd));
+
+	return 1;
+}
+
+/**
+ * PCD Callback function for stopping the PCD when switching to Host
+ * mode.
+ */
+static int dwc_otg_pcd_stop_cb(void *_p)
+{
+	dwc_otg_pcd_stop((struct dwc_pcd *)_p);
+	return 1;
+}
+
+/**
+ * PCD Callback function for notifying the PCD when resuming from
+ * suspend.
+ *
+ * @param _p void pointer to the <code>struct dwc_pcd</code>
+ */
+static int dwc_otg_pcd_suspend_cb(void *_p)
+{
+	struct dwc_pcd *pcd = (struct dwc_pcd *)_p;
+
+	if (pcd->driver && pcd->driver->suspend) {
+		spin_unlock(&pcd->lock);
+		pcd->driver->suspend(&pcd->gadget);
+		spin_lock(&pcd->lock);
+	}
+	return 1;
+}
+
+/**
+ * PCD Callback function for notifying the PCD when resuming from
+ * suspend.
+ */
+static int dwc_otg_pcd_resume_cb(void *_p)
+{
+	struct dwc_pcd *pcd = (struct dwc_pcd *)_p;
+	struct core_if *core_if = pcd->otg_dev->core_if;
+
+	if (pcd->driver && pcd->driver->resume) {
+		spin_unlock(&pcd->lock);
+		pcd->driver->resume(&pcd->gadget);
+		spin_lock(&pcd->lock);
+	}
+
+	/* Maybe stop the SRP timeout timer. */
+	if (need_stop_srp_timer(core_if))  {
+		core_if->srp_timer_started = 0;
+		del_timer_sync(&pcd->srp_timer);
+	}
+	return 1;
+}
+
+/**
+ * PCD Callback structure for handling mode switching.
+ */
+static struct cil_callbacks pcd_callbacks = {
+	.start = dwc_otg_pcd_start_cb,
+	.stop = dwc_otg_pcd_stop_cb,
+	.suspend = dwc_otg_pcd_suspend_cb,
+	.resume_wakeup = dwc_otg_pcd_resume_cb,
+	.p = 0, /* Set at registration */
+};
+
+/**
+ * Tasklet
+ *
+ */
+static void start_xfer_tasklet_func(unsigned long data)
+{
+	struct dwc_pcd *pcd = (struct dwc_pcd *)data;
+	union depctl_data diepctl;
+	int num = pcd->otg_dev->core_if->dev_if->num_in_eps;
+	u32 i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pcd->lock, flags);
+	diepctl.d32 = dwc_read_reg32(in_ep_ctl_reg(pcd, 0));
+
+	if (pcd->ep0.queue_sof) {
+		pcd->ep0.queue_sof = 0;
+		start_next_request(&pcd->ep0);
+	}
+
+	for (i = 0; i < num; i++) {
+		union depctl_data diepctl;
+		diepctl.d32 = dwc_read_reg32(in_ep_ctl_reg(pcd, i));
+
+		if (pcd->in_ep[i].queue_sof) {
+			pcd->in_ep[i].queue_sof = 0;
+			start_next_request(&pcd->in_ep[i]);
+		}
+	}
+	spin_unlock_irqrestore(&pcd->lock, flags);
+}
+
+static struct tasklet_struct start_xfer_tasklet = {
+	.next = NULL,
+	.state = 0,
+	.count = ATOMIC_INIT(0),
+	.func = start_xfer_tasklet_func,
+	.data = 0,
+};
+
+/**
+ * This function initialized the pcd Dp structures to there default
+ * state.
+ */
+void __devinit dwc_otg_pcd_reinit(struct dwc_pcd *pcd)
+{
+	static const char *names[] = {
+		"ep0", "ep1in", "ep2in", "ep3in", "ep4in", "ep5in",
+		"ep6in", "ep7in", "ep8in", "ep9in", "ep10in", "ep11in",
+		"ep12in", "ep13in", "ep14in", "ep15in", "ep1out", "ep2out",
+		"ep3out", "ep4out", "ep5out", "ep6out", "ep7out", "ep8out",
+		"ep9out", "ep10out", "ep11out", "ep12out", "ep13out",
+		"ep14out", "ep15out"
+	};
+
+	u32 i;
+	int in_ep_cntr, out_ep_cntr;
+	u32 hwcfg1;
+	u32 num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
+	u32 num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
+	struct pcd_ep *ep;
+
+	INIT_LIST_HEAD(&pcd->gadget.ep_list);
+
+	pcd->gadget.ep0 = &pcd->ep0.ep;
+	pcd->gadget.speed = USB_SPEED_UNKNOWN;
+	INIT_LIST_HEAD(&pcd->gadget.ep0->ep_list);
+
+	/* Initialize the EP0 structure. */
+	ep = &pcd->ep0;
+
+	/* Init EP structure */
+	ep->desc = NULL;
+	ep->pcd = pcd;
+	ep->stopped = 1;
+
+	/* Init DWC ep structure */
+	ep->dwc_ep.num = 0;
+	ep->dwc_ep.active = 0;
+	ep->dwc_ep.tx_fifo_num = 0;
+
+	/* Control until ep is actvated */
+	ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+	ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
+	ep->dwc_ep.dma_addr = 0;
+	ep->dwc_ep.start_xfer_buff = 0;
+	ep->dwc_ep.xfer_buff = 0;
+	ep->dwc_ep.xfer_len = 0;
+	ep->dwc_ep.xfer_count = 0;
+	ep->dwc_ep.sent_zlp = 0;
+	ep->dwc_ep.total_len = 0;
+	ep->queue_sof = 0;
+
+	/* Init the usb_ep structure. */
+	ep->ep.name = names[0];
+	ep->ep.ops = &dwc_otg_pcd_ep_ops;
+
+	ep->ep.maxpacket = MAX_PACKET_SIZE;
+	list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list);
+	INIT_LIST_HEAD(&ep->queue);
+
+	/* Initialize the EP structures. */
+	in_ep_cntr = 0;
+	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
+
+	for (i = 1; in_ep_cntr < num_in_eps; i++) {
+		if (!(hwcfg1 & 0x1)) {
+			struct pcd_ep *ep = &pcd->in_ep[in_ep_cntr];
+			in_ep_cntr++;
+
+			/* Init EP structure */
+			ep->desc = NULL;
+			ep->pcd = pcd;
+			ep->stopped = 1;
+
+			/* Init DWC ep structure */
+			ep->dwc_ep.is_in = 1;
+			ep->dwc_ep.num = i;
+			ep->dwc_ep.active = 0;
+			ep->dwc_ep.tx_fifo_num = 0;
+
+			/* Control until ep is actvated */
+			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
+			ep->dwc_ep.dma_addr = 0;
+			ep->dwc_ep.start_xfer_buff = 0;
+			ep->dwc_ep.xfer_buff = 0;
+			ep->dwc_ep.xfer_len = 0;
+			ep->dwc_ep.xfer_count = 0;
+			ep->dwc_ep.sent_zlp = 0;
+			ep->dwc_ep.total_len = 0;
+			ep->queue_sof = 0;
+
+			ep->ep.name = names[i];
+			ep->ep.ops = &dwc_otg_pcd_ep_ops;
+
+			ep->ep.maxpacket = MAX_PACKET_SIZE;
+			list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list);
+			INIT_LIST_HEAD(&ep->queue);
+		}
+		hwcfg1 >>= 2;
+	}
+
+	out_ep_cntr = 0;
+	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
+	for (i = 1; out_ep_cntr < num_out_eps; i++) {
+		if (!(hwcfg1 & 0x1)) {
+			struct pcd_ep *ep = &pcd->out_ep[out_ep_cntr];
+			out_ep_cntr++;
+
+			/* Init EP structure */
+			ep->desc = NULL;
+			ep->pcd = pcd;
+			ep->stopped = 1;
+
+			/* Init DWC ep structure */
+			ep->dwc_ep.is_in = 0;
+			ep->dwc_ep.num = i;
+			ep->dwc_ep.active = 0;
+			ep->dwc_ep.tx_fifo_num = 0;
+
+			/* Control until ep is actvated */
+			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
+			ep->dwc_ep.dma_addr = 0;
+			ep->dwc_ep.start_xfer_buff = 0;
+			ep->dwc_ep.xfer_buff = 0;
+			ep->dwc_ep.xfer_len = 0;
+			ep->dwc_ep.xfer_count = 0;
+			ep->dwc_ep.sent_zlp = 0;
+			ep->dwc_ep.total_len = 0;
+			ep->queue_sof = 0;
+
+			ep->ep.name = names[15 + i];
+			ep->ep.ops = &dwc_otg_pcd_ep_ops;
+
+			ep->ep.maxpacket = MAX_PACKET_SIZE;
+			list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list);
+			INIT_LIST_HEAD(&ep->queue);
+		}
+		hwcfg1 >>= 2;
+	}
+
+	/* remove ep0 from the list.  There is a ep0 pointer. */
+	list_del_init(&pcd->ep0.ep.ep_list);
+
+	pcd->ep0state = EP0_DISCONNECT;
+	pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
+	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
+	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+}
+
+/**
+ * This function releases the Gadget device.
+ * required by device_unregister().
+ */
+static void dwc_otg_pcd_gadget_release(struct device *dev)
+{
+	printk(KERN_INFO "%s(%p)\n", __func__, dev);
+}
+
+/**
+ * Allocates the buffers for the setup packets when the PCD portion of the
+ * driver is first initialized.
+ */
+static int __devinit init_pkt_buffs(struct device *dev, struct dwc_pcd *pcd)
+{
+	if (pcd->otg_dev->core_if->dma_enable) {
+		pcd->dwc_pool = dma_pool_create("dwc_otg_pcd", dev,
+				sizeof(*pcd->setup_pkt) * 5, 32, 0);
+		if (!pcd->dwc_pool)
+			return -ENOMEM;
+		pcd->setup_pkt = dma_pool_alloc(pcd->dwc_pool, GFP_KERNEL,
+				&pcd->setup_pkt_dma_handle);
+		if (!pcd->setup_pkt)
+			goto error;
+		pcd->status_buf = dma_pool_alloc(pcd->dwc_pool, GFP_KERNEL,
+				&pcd->status_buf_dma_handle);
+		if (!pcd->status_buf)
+			goto error1;
+	} else {
+		pcd->setup_pkt =  kmalloc(sizeof(*pcd->setup_pkt) * 5,
+			GFP_KERNEL);
+		if (!pcd->setup_pkt)
+			return -ENOMEM;
+		pcd->status_buf = kmalloc(sizeof(u16), GFP_KERNEL);
+		if (!pcd->status_buf)  {
+			kfree(pcd->setup_pkt);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+
+error1:
+	dma_pool_free(pcd->dwc_pool, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
+error:
+	dma_pool_destroy(pcd->dwc_pool);
+	return -ENOMEM;
+}
+
+/**
+ * This function initializes the PCD portion of the driver.
+ */
+int __devinit dwc_otg_pcd_init(struct device *dev)
+{
+	static char pcd_name[] = "dwc_otg_pcd";
+	struct dwc_pcd *pcd;
+	struct dwc_otg_device *otg_dev = dev_get_drvdata(dev);
+	struct core_if *core_if = otg_dev->core_if;
+	int retval = 0;
+
+	/* Allocate PCD structure */
+	pcd = kzalloc(sizeof(*pcd), GFP_KERNEL);
+	if (!pcd) {
+		retval = -ENOMEM;
+		goto err;
+	}
+
+	spin_lock_init(&pcd->lock);
+
+	otg_dev->pcd = pcd;
+	s_pcd = pcd;
+	pcd->gadget.name = pcd_name;
+
+	dev_set_name(&pcd->gadget.dev, "gadget");
+	pcd->otg_dev = otg_dev;
+	pcd->gadget.dev.parent = dev;
+	pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
+	pcd->gadget.ops = &dwc_otg_pcd_ops;
+
+	if (core_if->hwcfg4.b.ded_fifo_en)
+		printk(KERN_INFO "Dedicated Tx FIFOs mode\n");
+	else
+		printk(KERN_INFO "Shared Tx FIFO mode\n");
+
+	pcd->gadget.is_dualspeed = check_is_dual_speed(core_if);
+	pcd->gadget.is_otg = check_is_otg(core_if);
+
+	/* Register the gadget device */
+	retval = device_register(&pcd->gadget.dev);
+
+	/* Initialized the Core for Device mode. */
+	if (dwc_otg_is_device_mode(core_if))
+		dwc_otg_core_dev_init(core_if);
+
+	/*  Initialize EP structures */
+	dwc_otg_pcd_reinit(pcd);
+
+	/* Register the PCD Callbacks. */
+	dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd);
+
+	/* Setup interupt handler */
+	retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, IRQF_SHARED,
+				pcd->gadget.name, pcd);
+	if (retval) {
+		printk(KERN_ERR "request of irq%d failed\n", otg_dev->irq);
+		retval = -EBUSY;
+		goto err_cleanup;
+	}
+
+	/* Initialize the DMA buffer for SETUP packets */
+	retval = init_pkt_buffs(dev, pcd);
+	if (retval)
+		goto err_cleanup;
+
+	/* Initialize tasklet */
+	start_xfer_tasklet.data = (unsigned long) pcd;
+	pcd->start_xfer_tasklet = &start_xfer_tasklet;
+	return 0;
+
+err_cleanup:
+	kfree(pcd);
+	otg_dev->pcd = 0;
+	s_pcd = 0;
+
+err:
+	return retval;
+}
+
+/**
+ * Cleanup the PCD.
+ */
+void __devexit dwc_otg_pcd_remove(struct device *dev)
+{
+	struct dwc_otg_device *otg_dev = dev_get_drvdata(dev);
+	struct dwc_pcd *pcd = otg_dev->pcd;
+
+	/* Free the IRQ */
+	free_irq(otg_dev->irq, pcd);
+
+	/* start with the driver above us */
+	if (pcd->driver) {
+		/* should have been done already by driver model core */
+		printk(KERN_WARNING "driver '%s' is still registered\n",
+				pcd->driver->driver.name);
+		usb_gadget_unregister_driver(pcd->driver);
+	}
+	if (pcd->start_xfer_tasklet)
+		tasklet_kill(pcd->start_xfer_tasklet);
+	tasklet_kill(&pcd->test_mode_tasklet);
+
+	device_unregister(&pcd->gadget.dev);
+	if (GET_CORE_IF(pcd)->dma_enable) {
+		dma_pool_free(pcd->dwc_pool, pcd->setup_pkt,
+				pcd->setup_pkt_dma_handle);
+		dma_pool_free(pcd->dwc_pool, pcd->status_buf,
+				pcd->status_buf_dma_handle);
+		dma_pool_destroy(pcd->dwc_pool);
+	} else {
+		kfree(pcd->setup_pkt);
+		kfree(pcd->status_buf);
+	}
+	kfree(pcd);
+	otg_dev->pcd = 0;
+}
+
+/**
+ * This function registers a gadget driver with the PCD.
+ *
+ * When a driver is successfully registered, it will receive control
+ * requests including set_configuration(), which enables non-control
+ * requests.  then usb traffic follows until a disconnect is reported.
+ * then a host may connect again, or the driver might get unbound.
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int retval;
+
+	if (!driver || driver->speed == USB_SPEED_UNKNOWN || !driver->bind ||
+			!driver->unbind || !driver->disconnect ||
+			!driver->setup)
+		return -EINVAL;
+
+	if (s_pcd == 0)
+		return -ENODEV;
+
+	if (s_pcd->driver != 0)
+		return -EBUSY;
+
+	/* hook up the driver */
+	s_pcd->driver = driver;
+	s_pcd->gadget.dev.driver = &driver->driver;
+
+	retval = driver->bind(&s_pcd->gadget);
+	if (retval) {
+		struct core_if *core_if;
+		printk(KERN_ERR "bind to driver %s --> error %d\n",
+			driver->driver.name, retval);
+		core_if = s_pcd->otg_dev->core_if;
+		otg_set_peripheral(core_if->xceiv, &s_pcd->gadget);
+		s_pcd->driver = 0;
+		s_pcd->gadget.dev.driver = 0;
+		return retval;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+/**
+ * This function unregisters a gadget driver
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct core_if *core_if;
+
+	if (!s_pcd)
+		return -ENODEV;
+	if (!driver || driver != s_pcd->driver)
+		return -EINVAL;
+
+	core_if = s_pcd->otg_dev->core_if;
+	core_if->xceiv->state = OTG_STATE_UNDEFINED;
+	otg_set_peripheral(core_if->xceiv, NULL);
+
+	driver->unbind(&s_pcd->gadget);
+	s_pcd->driver = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.h b/drivers/usb/dwc_otg/dwc_otg_pcd.h
new file mode 100644
index 0000000..8deeda9
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h
@@ -0,0 +1,160 @@
+/*
+ * DesignWare HS OTG controller driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@apm.com>
+ *
+ * Based on versions provided by APM and Synopsis which are:
+ *	Copyright (C) 2009-2010 AppliedMicro(www.apm.com)
+ * Modified by Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__DWC_PCD_H__)
+#define __DWC_PCD_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+struct lm_device;
+struct dwc_otg_device;
+
+#include "dwc_otg_cil.h"
+
+/*
+ * This file contains the structures, constants, and interfaces for
+ * the Perpherial Contoller Driver (PCD).
+ *
+ * The Peripheral Controller Driver (PCD) for Linux will implement the
+ * Gadget API, so that the existing Gadget drivers can be used.	 For
+ * the Mass Storage Function driver the File-backed USB Storage Gadget
+ * (FBS) driver will be used.  The FBS driver supports the
+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
+ * transports.
+ *
+ */
+
+/* Invalid DMA Address */
+#define DMA_ADDR_INVALID			(~(dma_addr_t)0)
+/* Maxpacket size for EP0 */
+#define MAX_EP0_SIZE				64
+/* Maxpacket size for any EP */
+#define MAX_PACKET_SIZE				1024
+
+/*
+ * Get the pointer to the core_if from the pcd pointer.
+ */
+#define GET_CORE_IF(_pcd) (_pcd->otg_dev->core_if)
+
+/*
+ * DWC_otg request structure.
+ * This structure is a list of requests.
+ */
+struct pcd_request {
+	struct usb_request req;		/* USB Request. */
+	struct list_head queue;		/* queue of these requests. */
+	unsigned mapped:1;
+};
+
+static inline u32 *in_ep_int_reg(struct dwc_pcd *pd, int i)
+{
+	return (u32 *) &GET_CORE_IF(pd)->dev_if->in_ep_regs[i]->diepint;
+}
+static inline u32 *out_ep_int_reg(struct dwc_pcd *pd, int i)
+{
+	return (u32 *) &GET_CORE_IF(pd)->dev_if->out_ep_regs[i]->doepint;
+}
+static inline u32 *in_ep_ctl_reg(struct dwc_pcd *pd, int i)
+{
+	return (u32 *) &GET_CORE_IF(pd)->dev_if->in_ep_regs[i]->diepctl;
+}
+
+static inline u32 *out_ep_ctl_reg(struct dwc_pcd *pd, int i)
+{
+	return (u32 *) &GET_CORE_IF(pd)->dev_if->out_ep_regs[i]->doepctl;
+}
+
+static inline u32 *dev_ctl_reg(struct dwc_pcd *pd)
+{
+	return (u32 *) &(GET_CORE_IF(pd)->dev_if->dev_global_regs->dctl);
+}
+
+static inline u32 *dev_diepmsk_reg(struct dwc_pcd *pd)
+{
+	return (u32 *) &(GET_CORE_IF(pd)->dev_if->dev_global_regs->diepmsk);
+}
+
+static inline u32 *dev_sts_reg(struct dwc_pcd *pd)
+{
+	return (u32 *) &(GET_CORE_IF(pd)->dev_if->dev_global_regs->dsts);
+}
+
+static inline u32 *otg_ctl_reg(struct dwc_pcd *pd)
+{
+	return (u32 *) &(GET_CORE_IF(pd)->core_global_regs->gotgctl);
+}
+
+extern int  __init dwc_otg_pcd_init(struct device *dev);
+
+/*
+ * The following functions support managing the DWC_otg controller in device
+ * mode.
+ */
+extern void dwc_otg_ep_activate(struct core_if *core_if, struct dwc_ep *ep);
+extern void dwc_otg_ep_start_transfer(struct core_if *_if, struct dwc_ep *ep);
+extern void dwc_otg_ep_set_stall(struct core_if *core_if, struct dwc_ep *ep);
+extern void dwc_otg_ep_clear_stall(struct core_if *core_if, struct dwc_ep *ep);
+extern void dwc_otg_pcd_remove(struct device *dev);
+extern int dwc_otg_pcd_handle_intr(struct dwc_pcd *pcd);
+extern void dwc_otg_pcd_stop(struct dwc_pcd *pcd);
+extern void request_nuke(struct pcd_ep *ep);
+extern void dwc_otg_pcd_update_otg(struct dwc_pcd *pcd, const unsigned reset);
+extern void dwc_otg_ep0_start_transfer(struct core_if *_if, struct dwc_ep *ep);
+
+extern void request_done(struct pcd_ep *ep, struct pcd_request *req,
+				int _status);
+
+extern void start_next_request(struct pcd_ep *ep);
+
+#endif
