[V9,5/6] gpio: add DT binding doc for gpio of PMIC max77620/max20024
diff mbox

Message ID 1457707438-9842-6-git-send-email-ldewangan@nvidia.com
State New
Headers show

Commit Message

Laxman Dewangan March 11, 2016, 2:43 p.m. UTC
Maxim Semiconductor's PMIC MAX77620/MAX20024 has 8 GPIO pins
which act as GPIO as well as special function mode.

Add DT binding document to support these pins in GPIO
mode via GPIO framework.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Changes from V4:
- Separate out from gpio driver

Changes from V5/V6/V7:
- None

Changes from V8:
- Collected Linus ack.

 .../devicetree/bindings/gpio/gpio-max77620.txt     | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt

diff mbox

diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
new file mode 100644
index 0000000..410e716
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
@@ -0,0 +1,25 @@ 
+GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
+Device has 8 GPIO pins which can be configured as GPIO as well as the
+special IO functions.
+Required properties:
+- gpio-controller : 	Marks the device node as a gpio controller.
+- #gpio-cells : 	Should be two.  The first cell is the pin number and
+			the second cell is used to specify the gpio polarity:
+				0 = active high
+				1 = active low
+For more details, please refer generic GPIO DT binding document
+#include <dt-bindings/mfd/max77620.h>
+max77620@3c {
+	compatible = "maxim,max77620";
+	gpio-controller;
+	#gpio-cells = <2>;