diff mbox

[v6,2/5] soc: fsl: add GUTS driver for QorIQ platforms

Message ID 1457518131-11339-3-git-send-email-yangbo.lu@nxp.com
State Not Applicable, archived
Delegated to: David Miller
Headers show

Commit Message

Yangbo Lu March 9, 2016, 10:08 a.m. UTC 
The global utilities block controls power management, I/O device
enabling, power-onreset(POR) configuration monitoring, alternate
function selection for multiplexed signals,and clock control.

This patch adds GUTS driver to manage and access global utilities
block.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
	- None
Changes for v3:
	- None
Changes for v4:
	- Added this patch
Changes for v5:
	- Modified copyright info
	- Changed MODULE_LICENSE to GPL
	- Changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL
	- Made FSL_GUTS user-invisible
	- Added a complete compatible list for GUTS
	- Stored guts info in file-scope variable
	- Added mfspr() getting SVR
	- Redefined GUTS APIs
	- Called fsl_guts_init rather than using platform driver
	- Removed useless parentheses
	- Removed useless 'extern' key words
Changes for v6:
	- Made guts thread safe in fsl_guts_init
---
 drivers/soc/Kconfig      |   2 +-
 drivers/soc/fsl/Kconfig  |   8 ++++
 drivers/soc/fsl/Makefile |   1 +
 drivers/soc/fsl/guts.c   | 119 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/fsl/guts.h | 100 ++++++++++++++++++++-------------------
 5 files changed, 181 insertions(+), 49 deletions(-)
 create mode 100644 drivers/soc/fsl/Kconfig
 create mode 100644 drivers/soc/fsl/guts.c

Comments

Scott Wood March 18, 2016, 10:54 p.m. UTC | #1 
On 03/09/2016 04:18 AM, Yangbo Lu wrote:
> +#ifdef CONFIG_FSL_GUTS
> +u32 fsl_guts_get_svr(void);
> +int fsl_guts_init(void);
> +#endif

Don't ifdef prototypes (when not providing a stub alternative).

-Scott
Yangbo Lu March 25, 2016, 6:44 a.m. UTC | #2 
> -----Original Message-----
> From: Scott Wood
> Sent: Saturday, March 19, 2016 6:55 AM
> To: Yangbo Lu; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; linux-clk@vger.kernel.org; linux-
> i2c@vger.kernel.org; iommu@lists.linux-foundation.org;
> netdev@vger.kernel.org; linux-mmc@vger.kernel.org
> Cc: Rob Herring; Russell King; Jochen Friedrich; Joerg Roedel; Claudiu
> Manoil; ulf.hansson@linaro.org; Bhupesh Sharma; Zhao Qiang; Kumar Gala;
> Santosh Shilimkar; Yang-Leo Li; Xiaobo Xie
> Subject: Re: [v6, 2/5] soc: fsl: add GUTS driver for QorIQ platforms
> 
> On 03/09/2016 04:18 AM, Yangbo Lu wrote:
> > +#ifdef CONFIG_FSL_GUTS
> > +u32 fsl_guts_get_svr(void);
> > +int fsl_guts_init(void);
> > +#endif
> 
> Don't ifdef prototypes (when not providing a stub alternative).
> 
> -Scott

[Lu Yangbo-B47093] Ok, will remove the ifdef.
Thank you very much.
diff mbox

Patch

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 8826020..c4b6043 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,7 +2,7 @@  menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/bcm/Kconfig"
 source "drivers/soc/brcmstb/Kconfig"
-source "drivers/soc/fsl/qe/Kconfig"
+source "drivers/soc/fsl/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
new file mode 100644
index 0000000..b313759
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,8 @@ 
+#
+# Freescale SOC drivers
+#
+
+source "drivers/soc/fsl/qe/Kconfig"
+
+config FSL_GUTS
+	bool
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 203307f..02afb7f 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -4,3 +4,4 @@ 
 
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
+obj-$(CONFIG_FSL_GUTS)			+= guts.o
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
new file mode 100644
index 0000000..fa155e6
--- /dev/null
+++ b/drivers/soc/fsl/guts.c
@@ -0,0 +1,119 @@ 
+/*
+ * Freescale QorIQ Platforms GUTS Driver
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
+
+struct guts {
+	struct ccsr_guts __iomem *regs;
+	bool little_endian;
+};
+
+static struct guts *guts;
+static DEFINE_MUTEX(guts_lock);
+
+u32 fsl_guts_get_svr(void)
+{
+	u32 svr = 0;
+
+	if (!guts || !guts->regs) {
+#ifdef CONFIG_PPC
+		svr =  mfspr(SPRN_SVR);
+#endif
+		return svr;
+	}
+
+	if (guts->little_endian)
+		svr = ioread32(&guts->regs->svr);
+	else
+		svr = ioread32be(&guts->regs->svr);
+
+	return svr;
+}
+EXPORT_SYMBOL(fsl_guts_get_svr);
+
+/*
+ * Table for matching compatible strings, for device tree
+ * guts node, for Freescale QorIQ SOCs.
+ */
+static const struct of_device_id guts_of_match[] = {
+	/* For T4 & B4 Series SOCs */
+	{ .compatible = "fsl,qoriq-device-config-1.0", },
+	/* For P Series SOCs */
+	{ .compatible = "fsl,qoriq-device-config-2.0", },
+	{ .compatible = "fsl,p1010-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	/* For BSC Series SOCs */
+	{ .compatible = "fsl,bsc9131-guts", },
+	{ .compatible = "fsl,bsc9132-guts", },
+	/* For MPC85xx Series SOCs */
+	{ .compatible = "fsl,mpc8536-guts", },
+	{ .compatible = "fsl,mpc8544-guts", },
+	{ .compatible = "fsl,mpc8548-guts", },
+	{ .compatible = "fsl,mpc8568-guts", },
+	{ .compatible = "fsl,mpc8569-guts", },
+	{ .compatible = "fsl,mpc8572-guts", },
+	/* For Layerscape Series SOCs */
+	{ .compatible = "fsl,ls1021a-dcfg", },
+	{ .compatible = "fsl,ls1043a-dcfg", },
+	{ .compatible = "fsl,ls2080a-dcfg", },
+	{}
+};
+
+int fsl_guts_init(void)
+{
+	struct device_node *np;
+	int ret;
+
+	mutex_lock(&guts_lock);
+	/* Initialize guts only once */
+	if (guts) {
+		ret = guts->regs ? 0 : -ENOMEM;
+		goto out;
+	}
+
+	np = of_find_matching_node(NULL, guts_of_match);
+	if (!np) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	guts = kzalloc(sizeof(*guts), GFP_KERNEL);
+	if (!guts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	guts->little_endian = of_property_read_bool(np, "little-endian");
+
+	guts->regs = of_iomap(np, 0);
+	if (!guts->regs) {
+		ret = -ENOMEM;
+		kfree(guts);
+		goto out;
+	}
+
+	of_node_put(np);
+	ret = 0;
+out:
+	mutex_unlock(&guts_lock);
+	return ret;
+}
+EXPORT_SYMBOL(fsl_guts_init);
diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h
index 84d971f..b4db430 100644
--- a/include/linux/fsl/guts.h
+++ b/include/linux/fsl/guts.h
@@ -29,83 +29,87 @@ 
  * #ifdefs.
  */
 struct ccsr_guts {
-	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
-	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
-	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
-	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
-	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
+	u32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	u32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	u32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
+	u32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	u32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	u32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
 	u8	res018[0x20 - 0x18];
-	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
+	u32	porcir;		/* 0x.0020 - POR Configuration Information Register */
 	u8	res024[0x30 - 0x24];
-	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	u32	gpiocr;		/* 0x.0030 - GPIO Control Register */
 	u8	res034[0x40 - 0x34];
-	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	u32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
 	u8	res044[0x50 - 0x44];
-	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	u32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
 	u8	res054[0x60 - 0x54];
-	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
-        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
+	u32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
+	u32	pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
+	u32	dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
         u8	res06c[0x70 - 0x6c];
-	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+	u32	devdisr;	/* 0x.0070 - Device Disable Control */
 #define CCSR_GUTS_DEVDISR_TB1	0x00001000
 #define CCSR_GUTS_DEVDISR_TB0	0x00004000
-	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
+	u32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
 	u8	res078[0x7c - 0x78];
-	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
-	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
-	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
-	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
-	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
-	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
-	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
-	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
-	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
-	__be32	svr;		/* 0x.00a4 - System Version Register */
+	u32	pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
+	u32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
+	u32	pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
+	u32	pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
+	u32	pmcdr;		/* 0x.008c - 4Power management clock disable register */
+	u32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	u32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
+	u32	ectrstcr;	/* 0x.0098 - Exception reset control register */
+	u32	autorstsr;	/* 0x.009c - Automatic reset status register */
+	u32	pvr;		/* 0x.00a0 - Processor Version Register */
+	u32	svr;		/* 0x.00a4 - System Version Register */
 	u8	res0a8[0xb0 - 0xa8];
-	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
+	u32	rstcr;		/* 0x.00b0 - Reset Control Register */
 	u8	res0b4[0xc0 - 0xb4];
-	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register
+	u32	iovselsr;	/* 0x.00c0 - I/O voltage select status register
 					     Called 'elbcvselcr' on 86xx SOCs */
 	u8	res0c4[0x100 - 0xc4];
-	__be32	rcwsr[16];	/* 0x.0100 - Reset Control Word Status registers
+	u32	rcwsr[16];	/* 0x.0100 - Reset Control Word Status registers
 					     There are 16 registers */
 	u8	res140[0x224 - 0x140];
-	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
-	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
+	u32	iodelay1;	/* 0x.0224 - IO delay control register 1 */
+	u32	iodelay2;	/* 0x.0228 - IO delay control register 2 */
 	u8	res22c[0x604 - 0x22c];
-	__be32	pamubypenr; 	/* 0x.604 - PAMU bypass enable register */
+	u32	pamubypenr;	/* 0x.604 - PAMU bypass enable register */
 	u8	res608[0x800 - 0x608];
-	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
+	u32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
 	u8	res804[0x900 - 0x804];
-	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
+	u32	ircr;		/* 0x.0900 - Infrared Control Register */
 	u8	res904[0x908 - 0x904];
-	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
+	u32	dmacr;		/* 0x.0908 - DMA Control Register */
 	u8	res90c[0x914 - 0x90c];
-	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
+	u32	elbccr;		/* 0x.0914 - eLBC Control Register */
 	u8	res918[0xb20 - 0x918];
-	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
-	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
-	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
+	u32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
+	u32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
+	u32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
 	u8	resb2c[0xe00 - 0xb2c];
-	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	u32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
 	u8	rese04[0xe10 - 0xe04];
-	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	u32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
 	u8	rese14[0xe20 - 0xe14];
-	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
+	u32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	u32	cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
 	u8	rese28[0xf04 - 0xe28];
-	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
-	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
+	u32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
+	u32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
 	u8	resf0c[0xf2c - 0xf0c];
-	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
+	u32	itcr;		/* 0x.0f2c - Internal transaction control register */
 	u8	resf30[0xf40 - 0xf30];
-	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
-	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
+	u32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
+	u32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
 } __attribute__ ((packed));
 
+#ifdef CONFIG_FSL_GUTS
+u32 fsl_guts_get_svr(void);
+int fsl_guts_init(void);
+#endif
 
 /* Alternate function signal multiplex control */
 #define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))