| Message ID | 1457217531-26064-2-git-send-email-paul@crapouillou.net |
|---|---|
| State | Superseded |
| Headers | show |
Hello. On 3/6/2016 1:38 AM, Paul Cercueil wrote: > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > .../devicetree/bindings/rtc/ingenic,jz4740-rtc.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > > diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > new file mode 100644 > index 0000000..71e4ad0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > @@ -0,0 +1,38 @@ > +JZ4740 and similar SoCs real-time clock driver > + > +Required properties: > + > +- compatible: One of: > + - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC > + - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC > +- reg: Address range of rtc register set > +- interrupts: IRQ number for the alarm interrupt > +- interrupt-parent: phandle of the interrupt controller This is never a required property, it can be inherited from the parent node. [...] MBR, Sergei
On Sat, Mar 05, 2016 at 11:38:48PM +0100, Paul Cercueil wrote: > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > .../devicetree/bindings/rtc/ingenic,jz4740-rtc.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > > diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > new file mode 100644 > index 0000000..71e4ad0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > @@ -0,0 +1,38 @@ > +JZ4740 and similar SoCs real-time clock driver > + > +Required properties: > + > +- compatible: One of: > + - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC > + - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC > +- reg: Address range of rtc register set > +- interrupts: IRQ number for the alarm interrupt > +- interrupt-parent: phandle of the interrupt controller > +- clocks: phandle to the "rtc" clock > +- clock-names: must be "rtc" > + > +Optional properties: > +- system-power-controller: To use this component as the > + system power controller > +- reset-pin-assert-time: Reset pin low-level assertion time > + after wakeup (default 60ms; range 0-125ms if RTC clock at > + 32 kHz) > +- min-wakeup-pin-assert-time: Minimum wakeup pin assertion time > + (default 100ms; range 0-2s if RTC clock at 32 kHz) Please append units on these (-msec). > + > +Example: > + > +rtc@10003000 { > + compatible = "ingenic,jz4740-rtc"; > + reg = <0x10003000 0x3F>; > + > + interrupt-parent = <&intc>; > + interrupts = <32>; > + > + clocks = <&rtc_clock>; > + clock-names = "rtc"; > + > + system-power-controller; > + reset-pin-assert-time = <60>; > + min-wakeup-pin-assert-time = <100>; > +}; > -- > 2.7.0 >
On 05/03/2016 at 23:38:48 +0100, Paul Cercueil wrote : > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > .../devicetree/bindings/rtc/ingenic,jz4740-rtc.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > > diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > new file mode 100644 > index 0000000..71e4ad0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt > @@ -0,0 +1,38 @@ > +JZ4740 and similar SoCs real-time clock driver > + > +Required properties: > + > +- compatible: One of: > + - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC > + - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC > +- reg: Address range of rtc register set > +- interrupts: IRQ number for the alarm interrupt > +- interrupt-parent: phandle of the interrupt controller > +- clocks: phandle to the "rtc" clock > +- clock-names: must be "rtc" > + > +Optional properties: > +- system-power-controller: To use this component as the > + system power controller > +- reset-pin-assert-time: Reset pin low-level assertion time > + after wakeup (default 60ms; range 0-125ms if RTC clock at Trailing whitespace on that line.
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt new file mode 100644 index 0000000..71e4ad0 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt @@ -0,0 +1,38 @@ +JZ4740 and similar SoCs real-time clock driver + +Required properties: + +- compatible: One of: + - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC + - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC +- reg: Address range of rtc register set +- interrupts: IRQ number for the alarm interrupt +- interrupt-parent: phandle of the interrupt controller +- clocks: phandle to the "rtc" clock +- clock-names: must be "rtc" + +Optional properties: +- system-power-controller: To use this component as the + system power controller +- reset-pin-assert-time: Reset pin low-level assertion time + after wakeup (default 60ms; range 0-125ms if RTC clock at + 32 kHz) +- min-wakeup-pin-assert-time: Minimum wakeup pin assertion time + (default 100ms; range 0-2s if RTC clock at 32 kHz) + +Example: + +rtc@10003000 { + compatible = "ingenic,jz4740-rtc"; + reg = <0x10003000 0x3F>; + + interrupt-parent = <&intc>; + interrupts = <32>; + + clocks = <&rtc_clock>; + clock-names = "rtc"; + + system-power-controller; + reset-pin-assert-time = <60>; + min-wakeup-pin-assert-time = <100>; +};
Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- .../devicetree/bindings/rtc/ingenic,jz4740-rtc.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt