[v3,09/13] ARM: dts: sun8i-a83t: Add RSB controller device node to dtsi
diff mbox

Message ID 1457192586-25596-10-git-send-email-vishnupatekar0510@gmail.com
State New
Headers show

Commit Message

vishnupatekar March 5, 2016, 3:43 p.m. UTC
This patch adds a device node for the Reduced Serial Bus (RSB)
controller and the defacto pinmux setting to the A83T dtsi.

Since there is only one possible pinmux setting for RSB, just
set it in the dtsi.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Patch
diff mbox

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 5d240b9..7b02d85 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -476,6 +476,27 @@ 
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		r_rsb: i2c@01f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_reset 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };