[2/3] pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC
diff mbox

Message ID 1457005303-26829-3-git-send-email-yendapally.reddy@broadcom.com
State New
Headers show

Commit Message

Yendapally Reddy Dhananjaya Reddy March 3, 2016, 11:41 a.m. UTC
This adds the initial support of the Broadcom NS2 pinmux driver

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
 drivers/pinctrl/bcm/Kconfig           |   13 +
 drivers/pinctrl/bcm/Makefile          |    1 +
 drivers/pinctrl/bcm/pinctrl-ns2-mux.c | 1122 +++++++++++++++++++++++++++++++++
 3 files changed, 1136 insertions(+)
 create mode 100644 drivers/pinctrl/bcm/pinctrl-ns2-mux.c

Comments

Linus Walleij March 9, 2016, 11:04 a.m. UTC | #1
On Thu, Mar 3, 2016 at 6:41 PM, Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy@broadcom.com> wrote:

> This adds the initial support of the Broadcom NS2 pinmux driver
>
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>

Now yet another Broadcom driver!

Can I get the help of the maintainers of the other
Broadcom drivers to say:

- If this looks sane

- If this hardware looks suspiciously similar to one of the
  other drivers and should rather me a subdriver of one of
  the existing ones

?

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Warren March 9, 2016, 5:50 p.m. UTC | #2
On 03/09/2016 04:04 AM, Linus Walleij wrote:
> On Thu, Mar 3, 2016 at 6:41 PM, Yendapally Reddy Dhananjaya Reddy
> <yendapally.reddy@broadcom.com> wrote:
>
>> This adds the initial support of the Broadcom NS2 pinmux driver
>>
>> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
>
> Now yet another Broadcom driver!
>
> Can I get the help of the maintainers of the other
> Broadcom drivers to say:
>
> - If this looks sane
>
> - If this hardware looks suspiciously similar to one of the
>    other drivers and should rather me a subdriver of one of
>    the existing ones

Based on this patch, I don't quickly see any obvious relation between 
this HW and bcm2835. I don't know anything about other bcm pinmux, so 
didn't check those.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ray Jui March 9, 2016, 9:07 p.m. UTC | #3
Hi Linus,

On 3/9/2016 3:04 AM, Linus Walleij wrote:
> On Thu, Mar 3, 2016 at 6:41 PM, Yendapally Reddy Dhananjaya Reddy
> <yendapally.reddy@broadcom.com> wrote:
>
>> This adds the initial support of the Broadcom NS2 pinmux driver
>>
>> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
>
> Now yet another Broadcom driver!
>
> Can I get the help of the maintainers of the other
> Broadcom drivers to say:
>
> - If this looks sane
>

I've reviewed this driver internally before it was sent out to public. 
Here's my reviewed-by:

Reviewed-by: Ray Jui <ray.jui@broadcom.com>

Like I mentioned before, we have been working closely with our ASIC team 
to have one pad per register based register layout in our next-gen SoC. 
That way we are able to use the generic pinctrl-single driver. It's 
definitely our best interest to re-use a generic driver when possible, 
to minimize the ongoing maintenance cost. Note we only have control on 
chips that we work on; there are other Broadcom SoCs that we do not have 
a say, unfortunately.

> - If this hardware looks suspiciously similar to one of the
>   other drivers and should rather me a subdriver of one of
>   the existing ones

The IOMUX block in NS2 seems different from that of Cygnus and NSP. It 
only supports group based mux configuration and does not have any 
mechanism to allow GPIO pin function override. It also supports per pad 
based pinconf functions.

>
> Yours,
> Linus Walleij
>

Thanks,

Ray
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 2cc7438..c356223 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -86,3 +86,16 @@  config PINCTRL_NSP_GPIO
 	  The ChipcommonA GPIO controller support basic PINCONF functions such
 	  as bias pull up, pull down, and drive strength configurations, when
 	  these pins are muxed to GPIO.
+
+config PINCTRL_NS2_MUX
+	bool "Broadcom Northstar2 pinmux driver"
+	depends on OF
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARM64 && ARCH_BCM_IPROC
+	help
+	  Say yes here to enable the Broadcom NS2 MUX driver.
+
+	  The Broadcom Northstar2 IOMUX driver supports group based IOMUX
+	  configuration.
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 6148367..3861a1c 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -5,3 +5,4 @@  obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
 obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
 obj-$(CONFIG_PINCTRL_NSP_GPIO)		+= pinctrl-nsp-gpio.o
+obj-$(CONFIG_PINCTRL_NS2_MUX)		+= pinctrl-ns2-mux.o
diff --git a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
new file mode 100644
index 0000000..8f6fec2
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
@@ -0,0 +1,1122 @@ 
+/* Copyright (C) 2016 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Northstar2 IOMUX driver that supports group
+ * based PINMUX configuration. The PWM is functional only when the
+ * corresponding mfio pin group is selected as gpio.
+ */
+
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define NS2_NUM_IOMUX			19
+#define NS2_NUM_PWM_MUX			4
+
+#define NS2_PIN_MUX_BASE0		0x00
+#define NS2_PIN_MUX_BASE1		0x01
+#define NS2_PIN_CONF_BASE		0x02
+#define NS2_MUX_PAD_FUNC1_OFFSET	0x04
+
+#define NS2_PIN_SRC_MASK		0x01
+#define NS2_PIN_PULL_MASK		0x03
+#define NS2_PIN_DRIVE_STRENGTH_MASK	0x07
+
+#define NS2_PIN_PULL_UP			0x01
+#define NS2_PIN_PULL_DOWN		0x02
+
+#define NS2_PIN_INPUT_EN_MASK		0x01
+
+/*
+ * Northstar2 IOMUX register description
+ *
+ * @base: base address number
+ * @offset: register offset for mux configuration of a group
+ * @shift: bit shift for mux configuration of a group
+ * @mask: mask bits
+ * @alt: alternate function to set to
+ */
+struct ns2_mux {
+	unsigned int base;
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int mask;
+	unsigned int alt;
+};
+
+/*
+ * Keep track of Northstar2 IOMUX configuration and prevent double
+ * configuration
+ *
+ * @ns2_mux: Northstar2 IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already
+ * been configured
+ */
+struct ns2_mux_log {
+	struct ns2_mux mux;
+	bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: Northstar2 group based IOMUX configuration
+ */
+struct ns2_pin_group {
+	const char *name;
+	const unsigned *pins;
+	const unsigned num_pins;
+	const struct ns2_mux mux;
+};
+
+/*
+ * Northstar2 mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by function
+ */
+struct ns2_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned num_groups;
+};
+
+/*
+ * Northstar2 IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first IOMUX register base
+ * @base1: second IOMUX register base
+ * @pinconf_base: configuration register base
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct ns2_pinctrl {
+	struct pinctrl_dev *pctl;
+	struct device *dev;
+	void __iomem *base0;
+	void __iomem *base1;
+	void __iomem *pinconf_base;
+
+	const struct ns2_pin_group *groups;
+	unsigned num_groups;
+
+	const struct ns2_pin_function *functions;
+	unsigned num_functions;
+
+	struct ns2_mux_log *mux_log;
+
+	spinlock_t lock;
+};
+
+/*
+ * Pin configuration info
+ *
+ * @base: base address number
+ * @offset: register offset from base
+ * @src_shift: slew rate control bit shift in the register
+ * @input_en: input enable control bit shift
+ * @pull_shift: pull-up/pull-down control bit shift in the register
+ * @drive_shift: drive strength control bit shift in the register
+ */
+struct ns2_pinconf {
+	unsigned int base;
+	unsigned int offset;
+	unsigned int src_shift;
+	unsigned int input_en;
+	unsigned int pull_shift;
+	unsigned int drive_shift;
+};
+
+/*
+ * Description of a pin in Northstar2
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @pin_conf: pin configuration structure
+ */
+struct ns2_pin {
+	unsigned pin;
+	char *name;
+	struct ns2_pinconf pin_conf;
+};
+
+#define NS2_PIN_DESC(p, n, b, o, s, i, pu, d)	\
+{						\
+	.pin = p,				\
+	.name = n,				\
+	.pin_conf = {				\
+		.base = b,			\
+		.offset = o,			\
+		.src_shift = s,			\
+		.input_en = i,			\
+		.pull_shift = pu,		\
+		.drive_shift = d,		\
+	}					\
+}
+
+/*
+ * List of pins in Northstar2
+ */
+static struct ns2_pin ns2_pins[] = {
+	NS2_PIN_DESC(0, "mfio_0", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(1, "mfio_1", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(2, "mfio_2", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(3, "mfio_3", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(4, "mfio_4", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(5, "mfio_5", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(6, "mfio_6", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(7, "mfio_7", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(8, "mfio_8", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(9, "mfio_9", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(10, "mfio_10", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(11, "mfio_11", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(12, "mfio_12", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(13, "mfio_13", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(14, "mfio_14", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(15, "mfio_15", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(16, "mfio_16", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(17, "mfio_17", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(18, "mfio_18", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(19, "mfio_19", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(20, "mfio_20", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(21, "mfio_21", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(22, "mfio_22", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(23, "mfio_23", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(24, "mfio_24", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(25, "mfio_25", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(26, "mfio_26", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(27, "mfio_27", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(28, "mfio_28", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(29, "mfio_29", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(30, "mfio_30", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(31, "mfio_31", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(32, "mfio_32", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(33, "mfio_33", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(34, "mfio_34", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(35, "mfio_35", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(36, "mfio_36", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(37, "mfio_37", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(38, "mfio_38", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(39, "mfio_39", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(40, "mfio_40", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(41, "mfio_41", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(42, "mfio_42", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(43, "mfio_43", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(44, "mfio_44", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(45, "mfio_45", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(46, "mfio_46", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(47, "mfio_47", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(48, "mfio_48", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(49, "mfio_49", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(50, "mfio_50", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(51, "mfio_51", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(52, "mfio_52", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(53, "mfio_53", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(54, "mfio_54", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(55, "mfio_55", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(56, "mfio_56", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(57, "mfio_57", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(58, "mfio_58", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(59, "mfio_59", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(60, "mfio_60", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(61, "mfio_61", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(62, "mfio_62", -1, 0, 0, 0, 0, 0),
+	NS2_PIN_DESC(63, "qspi_wp", 2, 0x0, 31, 30, 27, 24),
+	NS2_PIN_DESC(64, "qspi_hold", 2, 0x0, 23, 22, 19, 16),
+	NS2_PIN_DESC(65, "qspi_cs", 2, 0x0, 15, 14, 11, 8),
+	NS2_PIN_DESC(66, "qspi_sck", 2, 0x0, 7, 6, 3, 0),
+	NS2_PIN_DESC(67, "uart3_sin", 2, 0x04, 31, 30, 27, 24),
+	NS2_PIN_DESC(68, "uart3_sout", 2, 0x04, 23, 22, 19, 16),
+	NS2_PIN_DESC(69, "qspi_mosi", 2, 0x04, 15, 14, 11, 8),
+	NS2_PIN_DESC(70, "qspi_miso", 2, 0x04, 7, 6, 3, 0),
+	NS2_PIN_DESC(71, "spi0_fss", 2, 0x08, 31, 30, 27, 24),
+	NS2_PIN_DESC(72, "spi0_rxd", 2, 0x08, 23, 22, 19, 16),
+	NS2_PIN_DESC(73, "spi0_txd", 2, 0x08, 15, 14, 11, 8),
+	NS2_PIN_DESC(74, "spi0_sck", 2, 0x08, 7, 6, 3, 0),
+	NS2_PIN_DESC(75, "spi1_fss", 2, 0x0c, 31, 30, 27, 24),
+	NS2_PIN_DESC(76, "spi1_rxd", 2, 0x0c, 23, 22, 19, 16),
+	NS2_PIN_DESC(77, "spi1_txd", 2, 0x0c, 15, 14, 11, 8),
+	NS2_PIN_DESC(78, "spi1_sck", 2, 0x0c, 7, 6, 3, 0),
+	NS2_PIN_DESC(79, "sdio0_data7", 2, 0x10, 31, 30, 27, 24),
+	NS2_PIN_DESC(80, "sdio0_emmc_rst", 2, 0x10, 23, 22, 19, 16),
+	NS2_PIN_DESC(81, "sdio0_led_on", 2, 0x10, 15, 14, 11, 8),
+	NS2_PIN_DESC(82, "sdio0_wp", 2, 0x10, 7, 6, 3, 0),
+	NS2_PIN_DESC(83, "sdio0_data3", 2, 0x14, 31, 30, 27, 24),
+	NS2_PIN_DESC(84, "sdio0_data4", 2, 0x14, 23, 22, 19, 16),
+	NS2_PIN_DESC(85, "sdio0_data5", 2, 0x14, 15, 14, 11, 8),
+	NS2_PIN_DESC(86, "sdio0_data6", 2, 0x14, 7, 6, 3, 0),
+	NS2_PIN_DESC(87, "sdio0_cmd", 2, 0x18, 31, 30, 27, 24),
+	NS2_PIN_DESC(88, "sdio0_data0", 2, 0x18, 23, 22, 19, 16),
+	NS2_PIN_DESC(89, "sdio0_data1", 2, 0x18, 15, 14, 11, 8),
+	NS2_PIN_DESC(90, "sdio0_data2", 2, 0x18, 7, 6, 3, 0),
+	NS2_PIN_DESC(91, "sdio1_led_on", 2, 0x1c, 31, 30, 27, 24),
+	NS2_PIN_DESC(92, "sdio1_wp", 2, 0x1c, 23, 22, 19, 16),
+	NS2_PIN_DESC(93, "sdio0_cd_l", 2, 0x1c, 15, 14, 11, 8),
+	NS2_PIN_DESC(94, "sdio0_clk", 2, 0x1c, 7, 6, 3, 0),
+	NS2_PIN_DESC(95, "sdio1_data5", 2, 0x20, 31, 30, 27, 24),
+	NS2_PIN_DESC(96, "sdio1_data6", 2, 0x20, 23, 22, 19, 16),
+	NS2_PIN_DESC(97, "sdio1_data7", 2, 0x20, 15, 14, 11, 8),
+	NS2_PIN_DESC(98, "sdio1_emmc_rst", 2, 0x20, 7, 6, 3, 0),
+	NS2_PIN_DESC(99, "sdio1_data1", 2, 0x24, 31, 30, 27, 24),
+	NS2_PIN_DESC(100, "sdio1_data2", 2, 0x24, 23, 22, 19, 16),
+	NS2_PIN_DESC(101, "sdio1_data3", 2, 0x24, 15, 14, 11, 8),
+	NS2_PIN_DESC(102, "sdio1_data4", 2, 0x24, 7, 6, 3, 0),
+	NS2_PIN_DESC(103, "sdio1_cd_l", 2, 0x28, 31, 30, 27, 24),
+	NS2_PIN_DESC(104, "sdio1_clk", 2, 0x28, 23, 22, 19, 16),
+	NS2_PIN_DESC(105, "sdio1_cmd", 2, 0x28, 15, 14, 11, 8),
+	NS2_PIN_DESC(106, "sdio1_data0", 2, 0x28, 7, 6, 3, 0),
+	NS2_PIN_DESC(107, "ext_mdio_0", 2, 0x2c, 15, 14, 11, 8),
+	NS2_PIN_DESC(108, "ext_mdc_0", 2, 0x2c, 7, 6, 3, 0),
+	NS2_PIN_DESC(109, "usb3_p1_vbus_ppc", 2, 0x34, 31, 30, 27, 24),
+	NS2_PIN_DESC(110, "usb3_p1_overcurrent", 2, 0x34, 23, 22, 19, 16),
+	NS2_PIN_DESC(111, "usb3_p0_vbus_ppc", 2, 0x34, 15, 14, 11, 8),
+	NS2_PIN_DESC(112, "usb3_p0_overcurrent", 2, 0x34, 7, 6, 3, 0),
+	NS2_PIN_DESC(113, "usb2_presence_indication", 2, 0x38, 31, 30, 27, 24),
+	NS2_PIN_DESC(114, "usb2_vbus_present", 2, 0x38, 23, 22, 19, 16),
+	NS2_PIN_DESC(115, "usb2_vbus_ppc", 2, 0x38, 15, 14, 11, 8),
+	NS2_PIN_DESC(116, "usb2_overcurrent", 2, 0x38, 7, 6, 3, 0),
+	NS2_PIN_DESC(117, "sata_led1", 2, 0x3c, 15, 14, 11, 8),
+	NS2_PIN_DESC(118, "sata_led0", 2, 0x3c, 7, 6, 3, 0),
+};
+
+/*
+ * List of groups of pins
+ */
+
+static const unsigned nand_pins[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
+	11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23};
+static const unsigned nor_data_pins[] =  {0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
+	10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23};
+
+static const unsigned gpio_0_1_pins[] = {24, 25};
+static const unsigned pwm_0_pins[] = {24};
+static const unsigned pwm_1_pins[] = {25};
+
+static const unsigned uart1_ext_clk_pins[] = {26};
+static const unsigned nor_adv_pins[] = {26};
+
+static const unsigned gpio_2_5_pins[] = {27, 28, 29, 30};
+static const unsigned pcie_ab1_clk_wak_pins[] = {27, 28, 29, 30};
+static const unsigned nor_addr_0_3_pins[] = {27, 28, 29, 30};
+static const unsigned pwm_2_pins[] = {27};
+static const unsigned pwm_3_pins[] = {28};
+
+static const unsigned gpio_6_7_pins[] = {31, 32};
+static const unsigned pcie_a3_clk_wak_pins[] = {31, 32};
+static const unsigned nor_addr_4_5_pins[] = {31, 32};
+
+static const unsigned gpio_8_9_pins[] = {33, 34};
+static const unsigned pcie_b3_clk_wak_pins[] = {33, 34};
+static const unsigned nor_addr_6_7_pins[] = {33, 34};
+
+static const unsigned gpio_10_11_pins[] = {35, 36};
+static const unsigned pcie_b2_clk_wak_pins[] = {35, 36};
+static const unsigned nor_addr_8_9_pins[] = {35, 36};
+
+static const unsigned gpio_12_13_pins[] = {37, 38};
+static const unsigned pcie_a2_clk_wak_pins[] = {37, 38};
+static const unsigned nor_addr_10_11_pins[] = {37, 38};
+
+static const unsigned gpio_14_17_pins[] = {39, 40, 41, 42};
+static const unsigned uart0_modem_pins[] = {39, 40, 41, 42};
+static const unsigned nor_addr_12_15_pins[] = {39, 40, 41, 42};
+
+static const unsigned gpio_18_19_pins[] = {43, 44};
+static const unsigned uart0_rts_cts_pins[] = {43, 44};
+
+static const unsigned gpio_20_21_pins[] = {45, 46};
+static const unsigned uart0_in_out_pins[] = {45, 46};
+
+static const unsigned gpio_22_23_pins[] = {47, 48};
+static const unsigned uart1_dcd_dsr_pins[] = {47, 48};
+
+static const unsigned gpio_24_25_pins[] = {49, 50};
+static const unsigned uart1_ri_dtr_pins[] = {49, 50};
+
+static const unsigned gpio_26_27_pins[] = {51, 52};
+static const unsigned uart1_rts_cts_pins[] = {51, 52};
+
+static const unsigned gpio_28_29_pins[] = {53, 54};
+static const unsigned uart1_in_out_pins[] = {53, 54};
+
+static const unsigned gpio_30_31_pins[] = {55, 56};
+static const unsigned uart2_rts_cts_pins[] = {55, 56};
+
+#define NS2_PIN_GROUP(group_name, ba, off, sh, ma, al)	\
+{							\
+	.name = __stringify(group_name) "_grp",		\
+	.pins = group_name ## _pins,			\
+	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
+	.mux = {					\
+		.base = ba,				\
+		.offset = off,				\
+		.shift = sh,				\
+		.mask = ma,				\
+		.alt = al,				\
+	}						\
+}
+
+/*
+ * List of Northstar2 pin groups
+ */
+static const struct ns2_pin_group ns2_pin_groups[] = {
+	NS2_PIN_GROUP(nand, 0, 0, 31, 1, 0),
+	NS2_PIN_GROUP(nor_data, 0, 0, 31, 1, 1),
+	NS2_PIN_GROUP(gpio_0_1, 0, 0, 31, 1, 0),
+
+	NS2_PIN_GROUP(uart1_ext_clk, 0, 4, 30, 3, 1),
+	NS2_PIN_GROUP(nor_adv, 0, 4, 30, 3, 2),
+
+	NS2_PIN_GROUP(gpio_2_5,	0, 4, 28, 3, 0),
+	NS2_PIN_GROUP(pcie_ab1_clk_wak, 0, 4, 28, 3, 1),
+	NS2_PIN_GROUP(nor_addr_0_3, 0, 4, 28, 3, 2),
+
+	NS2_PIN_GROUP(gpio_6_7, 0, 4, 26, 3, 0),
+	NS2_PIN_GROUP(pcie_a3_clk_wak, 0, 4, 26, 3, 1),
+	NS2_PIN_GROUP(nor_addr_4_5, 0, 4, 26, 3, 2),
+
+	NS2_PIN_GROUP(gpio_8_9, 0, 4, 24, 3, 0),
+	NS2_PIN_GROUP(pcie_b3_clk_wak, 0, 4, 24, 3, 1),
+	NS2_PIN_GROUP(nor_addr_6_7, 0, 4, 24, 3, 2),
+
+	NS2_PIN_GROUP(gpio_10_11, 0, 4, 22, 3, 0),
+	NS2_PIN_GROUP(pcie_b2_clk_wak, 0, 4, 22, 3, 1),
+	NS2_PIN_GROUP(nor_addr_8_9, 0, 4, 22, 3, 2),
+
+	NS2_PIN_GROUP(gpio_12_13, 0, 4, 20, 3, 0),
+	NS2_PIN_GROUP(pcie_a2_clk_wak, 0, 4, 20, 3, 1),
+	NS2_PIN_GROUP(nor_addr_10_11, 0, 4, 20, 3, 2),
+
+	NS2_PIN_GROUP(gpio_14_17, 0, 4, 18, 3, 0),
+	NS2_PIN_GROUP(uart0_modem, 0, 4, 18, 3, 1),
+	NS2_PIN_GROUP(nor_addr_12_15, 0, 4, 18, 3, 2),
+
+	NS2_PIN_GROUP(gpio_18_19, 0, 4, 16, 3, 0),
+	NS2_PIN_GROUP(uart0_rts_cts, 0, 4, 16, 3, 1),
+
+	NS2_PIN_GROUP(gpio_20_21, 0, 4, 14, 3, 0),
+	NS2_PIN_GROUP(uart0_in_out, 0, 4, 14, 3, 1),
+
+	NS2_PIN_GROUP(gpio_22_23, 0, 4, 12, 3, 0),
+	NS2_PIN_GROUP(uart1_dcd_dsr, 0, 4, 12, 3, 1),
+
+	NS2_PIN_GROUP(gpio_24_25, 0, 4, 10, 3, 0),
+	NS2_PIN_GROUP(uart1_ri_dtr, 0, 4, 10, 3, 1),
+
+	NS2_PIN_GROUP(gpio_26_27, 0, 4, 8, 3, 0),
+	NS2_PIN_GROUP(uart1_rts_cts, 0, 4, 8, 3, 1),
+
+	NS2_PIN_GROUP(gpio_28_29, 0, 4, 6, 3, 0),
+	NS2_PIN_GROUP(uart1_in_out, 0, 4, 6, 3, 1),
+
+	NS2_PIN_GROUP(gpio_30_31, 0, 4, 4, 3, 0),
+	NS2_PIN_GROUP(uart2_rts_cts, 0, 4, 4, 3, 1),
+
+	NS2_PIN_GROUP(pwm_0, 1, 0, 0, 1, 1),
+	NS2_PIN_GROUP(pwm_1, 1, 0, 1, 1, 1),
+	NS2_PIN_GROUP(pwm_2, 1, 0, 2, 1, 1),
+	NS2_PIN_GROUP(pwm_3, 1, 0, 3, 1, 1),
+};
+
+/*
+ * List of groups supported by functions
+ */
+
+static const char * const nand_grps[] = {"nand_grp"};
+
+static const char * const nor_grps[] = {"nor_data_grp", "nor_adv_grp",
+	"nor_addr_0_3_grp", "nor_addr_4_5_grp",	"nor_addr_6_7_grp",
+	"nor_addr_8_9_grp", "nor_addr_10_11_grp", "nor_addr_12_15_grp"};
+
+static const char * const gpio_grps[] = {"gpio_0_1_grp", "gpio_2_5_grp",
+	"gpio_6_7_grp",	"gpio_8_9_grp",	"gpio_10_11_grp", "gpio_12_13_grp",
+	"gpio_14_17_grp", "gpio_18_19_grp", "gpio_20_21_grp", "gpio_22_23_grp",
+	"gpio_24_25_grp", "gpio_26_27_grp", "gpio_28_29_grp",
+	"gpio_30_31_grp"};
+
+static const char * const pcie_grps[] = {"pcie_ab1_clk_wak_grp",
+	"pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp", "pcie_b2_clk_wak_grp",
+	"pcie_a2_clk_wak_grp"};
+
+static const char * const uart0_grps[] = {"uart0_modem_grp",
+	"uart0_rts_cts_grp", "uart0_in_out_grp"};
+
+static const char * const uart1_grps[] = {"uart1_ext_clk_grp",
+	"uart1_dcd_dsr_grp", "uart1_ri_dtr_grp", "uart1_rts_cts_grp",
+	"uart1_in_out_grp"};
+
+static const char * const uart2_grps[] = {"uart2_rts_cts_grp"};
+
+static const char * const pwm_grps[] = {"pwm_0_grp", "pwm_1_grp",
+	"pwm_2_grp", "pwm_3_grp"};
+
+#define NS2_PIN_FUNCTION(func)				\
+{							\
+	.name = #func,					\
+	.groups = func ## _grps,			\
+	.num_groups = ARRAY_SIZE(func ## _grps),	\
+}
+
+/*
+ * List of supported functions
+ */
+static const struct ns2_pin_function ns2_pin_functions[] = {
+	NS2_PIN_FUNCTION(nand),
+	NS2_PIN_FUNCTION(nor),
+	NS2_PIN_FUNCTION(gpio),
+	NS2_PIN_FUNCTION(pcie),
+	NS2_PIN_FUNCTION(uart0),
+	NS2_PIN_FUNCTION(uart1),
+	NS2_PIN_FUNCTION(uart2),
+	NS2_PIN_FUNCTION(pwm),
+};
+
+static int ns2_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_groups;
+}
+
+static const char *ns2_get_group_name(struct pinctrl_dev *pctrl_dev,
+				      unsigned selector)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->groups[selector].name;
+}
+
+static int ns2_get_group_pins(struct pinctrl_dev *pctrl_dev,
+			      unsigned selector, const unsigned **pins,
+			      unsigned *num_pins)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*pins = pinctrl->groups[selector].pins;
+	*num_pins = pinctrl->groups[selector].num_pins;
+
+	return 0;
+}
+
+static void ns2_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+			     struct seq_file *s, unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static struct pinctrl_ops ns2_pinctrl_ops = {
+	.get_groups_count = ns2_get_groups_count,
+	.get_group_name = ns2_get_group_name,
+	.get_group_pins = ns2_get_group_pins,
+	.pin_dbg_show = ns2_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int ns2_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_functions;
+}
+
+static const char *ns2_get_function_name(struct pinctrl_dev *pctrl_dev,
+					 unsigned selector)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->functions[selector].name;
+}
+
+static int ns2_get_function_groups(struct pinctrl_dev *pctrl_dev,
+				   unsigned selector,
+				   const char * const **groups,
+				   unsigned * const num_groups)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*groups = pinctrl->functions[selector].groups;
+	*num_groups = pinctrl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int ns2_pinmux_set(struct ns2_pinctrl *pinctrl,
+			  const struct ns2_pin_function *func,
+			  const struct ns2_pin_group *grp,
+			  struct ns2_mux_log *mux_log)
+{
+	const struct ns2_mux *mux = &grp->mux;
+	int i;
+	u32 val, mask;
+	unsigned long flags;
+	void __iomem *base_address;
+
+	for (i = 0; i < NS2_NUM_IOMUX; i++) {
+		if ((mux->shift != mux_log[i].mux.shift) ||
+			(mux->base != mux_log[i].mux.base) ||
+			(mux->offset != mux_log[i].mux.offset))
+			continue;
+
+		/* if this is a new configuration, just do it! */
+		if (!mux_log[i].is_configured)
+			break;
+
+		/*
+		 * IOMUX has been configured previously and one is trying to
+		 * configure it to a different function
+		 */
+		if (mux_log[i].mux.alt != mux->alt) {
+			dev_err(pinctrl->dev,
+				"double configuration error detected!\n");
+			dev_err(pinctrl->dev, "func:%s grp:%s\n",
+				func->name, grp->name);
+			return -EINVAL;
+		}
+
+		return 0;
+	}
+	if (i == NS2_NUM_IOMUX)
+		return -EINVAL;
+
+	mask = mux->mask;
+	mux_log[i].mux.alt = mux->alt;
+	mux_log[i].is_configured = true;
+
+	switch (mux->base) {
+	case NS2_PIN_MUX_BASE0:
+		base_address = pinctrl->base0;
+		break;
+
+	case NS2_PIN_MUX_BASE1:
+		base_address = pinctrl->base1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + grp->mux.offset);
+	val &= ~(mask << grp->mux.shift);
+	val |= grp->mux.alt << grp->mux.shift;
+	writel(val, (base_address + grp->mux.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static int ns2_pinmux_enable(struct pinctrl_dev *pctrl_dev,
+			     unsigned func_select, unsigned grp_select)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct ns2_pin_function *func;
+	const struct ns2_pin_group *grp;
+
+	if (grp_select > pinctrl->num_groups ||
+		func_select > pinctrl->num_functions)
+		return -EINVAL;
+
+	func = &pinctrl->functions[func_select];
+	grp = &pinctrl->groups[grp_select];
+
+	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+		func_select, func->name, grp_select, grp->name);
+
+	dev_dbg(pctrl_dev->dev, "offset:0x%08x shift:%u alt:%u\n",
+		grp->mux.offset, grp->mux.shift, grp->mux.alt);
+
+	return ns2_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+static int ns2_pin_set_enable(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    u16 enable)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+	void __iomem *base_address;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_SRC_MASK << pin_data->pin_conf.input_en);
+
+	if (!enable)
+		val |= NS2_PIN_INPUT_EN_MASK << pin_data->pin_conf.input_en;
+
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set enable:%d\n", pin, enable);
+	return 0;
+}
+
+static int ns2_pin_get_enable(struct pinctrl_dev *pctrldev, unsigned int pin)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	int enable;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	enable = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	enable = (enable >> pin_data->pin_conf.input_en) &
+			NS2_PIN_INPUT_EN_MASK;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	if (!enable)
+		enable = NS2_PIN_INPUT_EN_MASK;
+	else
+		enable = 0;
+
+	dev_dbg(pctrldev->dev, "pin:%u get disable:%d\n", pin, enable);
+	return enable;
+}
+
+static int ns2_pin_set_slew(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    u16 slew)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+	void __iomem *base_address;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_SRC_MASK << pin_data->pin_conf.src_shift);
+
+	if (slew)
+		val |= NS2_PIN_SRC_MASK << pin_data->pin_conf.src_shift;
+
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set slew:%d\n", pin, slew);
+	return 0;
+}
+
+static int ns2_pin_get_slew(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    u16 *slew)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	*slew = (val >> pin_data->pin_conf.src_shift) & NS2_PIN_SRC_MASK;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u get slew:%d\n", pin, *slew);
+	return 0;
+}
+
+static int ns2_pin_set_pull(struct pinctrl_dev *pctrldev, unsigned int pin,
+			    bool pull_up, bool pull_down)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+	void __iomem *base_address;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_PULL_MASK << pin_data->pin_conf.pull_shift);
+
+	if (pull_up == true)
+		val |= NS2_PIN_PULL_UP << pin_data->pin_conf.pull_shift;
+	if (pull_down == true)
+		val |= NS2_PIN_PULL_DOWN << pin_data->pin_conf.pull_shift;
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set pullup:%d pulldown: %d\n",
+		pin, pull_up, pull_down);
+	return 0;
+}
+
+static void ns2_pin_get_pull(struct pinctrl_dev *pctrldev,
+			     unsigned int pin, bool *pull_up,
+			     bool *pull_down)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	val = (val >> pin_data->pin_conf.pull_shift) & NS2_PIN_PULL_MASK;
+	*pull_up = false;
+	*pull_down = false;
+
+	if (val == NS2_PIN_PULL_UP)
+		*pull_up = true;
+
+	if (val == NS2_PIN_PULL_DOWN)
+		*pull_down = true;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+}
+
+static int ns2_pin_set_strength(struct pinctrl_dev *pctrldev, unsigned int pin,
+				u16 strength)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+	void __iomem *base_address;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 || strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	base_address = pinctrl->pinconf_base;
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address + pin_data->pin_conf.offset);
+	val &= ~(NS2_PIN_DRIVE_STRENGTH_MASK << pin_data->pin_conf.drive_shift);
+	val |= ((strength / 2) - 1) << pin_data->pin_conf.drive_shift;
+	writel(val, (base_address + pin_data->pin_conf.offset));
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u set drive strength:%d mA\n",
+		pin, strength);
+	return 0;
+}
+
+static int ns2_pin_get_strength(struct pinctrl_dev *pctrldev, unsigned int pin,
+				 u16 *strength)
+{
+	struct ns2_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrldev);
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->pinconf_base + pin_data->pin_conf.offset);
+	*strength = (val >> pin_data->pin_conf.drive_shift) &
+					NS2_PIN_DRIVE_STRENGTH_MASK;
+	*strength = (*strength + 1) * 2;
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrldev->dev, "pin:%u get drive strength:%d mA\n",
+		pin, *strength);
+	return 0;
+}
+
+static int ns2_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *config)
+{
+	struct ns2_pin *pin_data = pctldev->desc->pins[pin].drv_data;
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	bool pull_up, pull_down;
+	u16 arg = 0;
+	int ret;
+
+	if (pin_data->pin_conf.base == -1)
+		return -ENOTSUPP;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		ns2_pin_get_pull(pctldev, pin, &pull_up, &pull_down);
+		if ((pull_up == false) && (pull_down == false))
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		ns2_pin_get_pull(pctldev, pin, &pull_up, &pull_down);
+		if (pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		ns2_pin_get_pull(pctldev, pin, &pull_up, &pull_down);
+		if (pull_down)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = ns2_pin_get_strength(pctldev, pin, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	case PIN_CONFIG_SLEW_RATE:
+		ret = ns2_pin_get_slew(pctldev, pin, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	case PIN_CONFIG_INPUT_ENABLE:
+		ret = ns2_pin_get_enable(pctldev, pin);
+		if (ret)
+			return 0;
+		else
+			return -EINVAL;
+
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ns2_pin_config_set(struct pinctrl_dev *pctrldev, unsigned pin,
+			      unsigned long *configs, unsigned num_configs)
+{
+	struct ns2_pin *pin_data = pctrldev->desc->pins[pin].drv_data;
+	enum pin_config_param param;
+	unsigned int i;
+	u16 arg;
+	int ret = -ENOTSUPP;
+
+	if (pin_data->pin_conf.base == -1)
+		return -ENOTSUPP;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = ns2_pin_set_pull(pctrldev, pin, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = ns2_pin_set_pull(pctrldev, pin, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = ns2_pin_set_pull(pctrldev, pin, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = ns2_pin_set_strength(pctrldev, pin, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			ret = ns2_pin_set_slew(pctrldev, pin, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			ret = ns2_pin_set_enable(pctrldev, pin, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(pctrldev->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	}
+out:
+	return ret;
+}
+static struct pinmux_ops ns2_pinmux_ops = {
+	.get_functions_count = ns2_get_functions_count,
+	.get_function_name = ns2_get_function_name,
+	.get_function_groups = ns2_get_function_groups,
+	.set_mux = ns2_pinmux_enable,
+};
+
+static const struct pinconf_ops ns2_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = ns2_pin_config_get,
+	.pin_config_set = ns2_pin_config_set,
+};
+
+static struct pinctrl_desc ns2_pinctrl_desc = {
+	.name = "ns2-pinmux",
+	.pctlops = &ns2_pinctrl_ops,
+	.pmxops = &ns2_pinmux_ops,
+	.confops = &ns2_pinconf_ops,
+};
+
+static int ns2_mux_log_init(struct ns2_pinctrl *pinctrl)
+{
+	struct ns2_mux_log *log;
+	unsigned int i;
+
+	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, NS2_NUM_IOMUX,
+					sizeof(struct ns2_mux_log),
+					GFP_KERNEL);
+	if (!pinctrl->mux_log)
+		return -ENOMEM;
+
+	for (i = 0; i < NS2_NUM_IOMUX; i++)
+		pinctrl->mux_log[i].is_configured = false;
+	/* Group 0 uses bit 31 in the IOMUX_PAD_FUNCTION_0 register */
+	log = &pinctrl->mux_log[0];
+	log->mux.base = NS2_PIN_MUX_BASE0;
+	log->mux.offset = 0;
+	log->mux.shift = 31;
+	log->mux.alt = 0;
+
+	/*
+	 * Groups 1 through 14 use two bits each in the
+	 * IOMUX_PAD_FUNCTION_1 register starting with
+	 * bit position 30.
+	 */
+	for (i = 1; i < (NS2_NUM_IOMUX - NS2_NUM_PWM_MUX); i++) {
+		log = &pinctrl->mux_log[i];
+		log->mux.base = NS2_PIN_MUX_BASE0;
+		log->mux.offset = NS2_MUX_PAD_FUNC1_OFFSET;
+		log->mux.shift = 32 - (i * 2);
+		log->mux.alt = 0;
+	}
+
+	/*
+	 * Groups 15 through 18 use one bit each in the
+	 * AUX_SEL register.
+	 */
+	for (i = 0; i < NS2_NUM_PWM_MUX; i++) {
+		log = &pinctrl->mux_log[(NS2_NUM_IOMUX - NS2_NUM_PWM_MUX) + i];
+		log->mux.base = NS2_PIN_MUX_BASE1;
+		log->mux.offset = 0;
+		log->mux.shift = i;
+		log->mux.alt =  0;
+	}
+	return 0;
+}
+
+static int ns2_pinmux_probe(struct platform_device *pdev)
+{
+	struct ns2_pinctrl *pinctrl;
+	struct resource *res;
+	int i, ret;
+	struct pinctrl_pin_desc *pins;
+	unsigned num_pins = ARRAY_SIZE(ns2_pins);
+
+	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+	if (!pinctrl)
+		return -ENOMEM;
+
+	pinctrl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pinctrl);
+	spin_lock_init(&pinctrl->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base0)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base0);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pinctrl->base1 = devm_ioremap_nocache(&pdev->dev, res->start,
+					resource_size(res));
+	if (!pinctrl->base1) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	pinctrl->pinconf_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->pinconf_base)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->pinconf_base);
+	}
+
+	ret = ns2_mux_log_init(pinctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+		return ret;
+	}
+
+	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		pins[i].number = ns2_pins[i].pin;
+		pins[i].name = ns2_pins[i].name;
+		pins[i].drv_data = &ns2_pins[i];
+	}
+
+	pinctrl->groups = ns2_pin_groups;
+	pinctrl->num_groups = ARRAY_SIZE(ns2_pin_groups);
+	pinctrl->functions = ns2_pin_functions;
+	pinctrl->num_functions = ARRAY_SIZE(ns2_pin_functions);
+	ns2_pinctrl_desc.pins = pins;
+	ns2_pinctrl_desc.npins = num_pins;
+
+	pinctrl->pctl = pinctrl_register(&ns2_pinctrl_desc, &pdev->dev,
+			pinctrl);
+	if (!pinctrl->pctl) {
+		dev_err(&pdev->dev, "unable to register IOMUX pinctrl\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ns2_pinmux_of_match[] = {
+	{.compatible = "brcm,ns2-pinmux"},
+	{ }
+};
+
+static struct platform_driver ns2_pinmux_driver = {
+	.driver = {
+		.name = "ns2-pinmux",
+		.of_match_table = ns2_pinmux_of_match,
+	},
+	.probe = ns2_pinmux_probe,
+};
+
+static int __init ns2_pinmux_init(void)
+{
+	return platform_driver_register(&ns2_pinmux_driver);
+}
+arch_initcall(ns2_pinmux_init);
+
+MODULE_DESCRIPTION("Broadcom Northstar2 IOMUX driver");
+MODULE_LICENSE("GPL v2");