| Message ID | 1279299010-4723-1-git-send-email-bebarino@gmail.com |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | David Miller |
| Headers | show |
On Fri, Jul 16, 2010 at 6:50 PM, Stephen Boyd <bebarino@gmail.com> wrote: > The rt2x00dev->intf_work workqueue is never initialized when a driver is > probed for a non-existent device (in this case rt2500usb). On such a > path we call rt2x00lib_remove_dev() to free any resources initialized > during the probe before we use INIT_WORK to initialize the workqueue. > This causes lockdep to get confused since the lock used in the workqueue > hasn't been initialized yet but is now being acquired during > cancel_work_sync() called by rt2x00lib_remove_dev(). > > Fix this by initializing the workqueue first before we attempt to probe > the device. This should make lockdep happy and avoid breaking any > assumptions about how the library cleans up after a probe fails. > > phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. > INFO: trying to register non-static key. > the code is fine but needs lockdep annotation. > turning off the locking correctness validator. > Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60 > Call Trace: > [<ffffffff8105fe59>] register_lock_class+0x152/0x31f > [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111 > [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4 > [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf > [<ffffffff81492aef>] ? _raw_spin_unlock_irqrestore+0x33/0x41 > [<ffffffff810628d5>] lock_acquire+0xd1/0xf7 > [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e > [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e > [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e > [<ffffffff8104f136>] cancel_work_sync+0xb/0xd > [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib] > [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib] > [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52 > [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb] > [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb] > [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e > [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136 > [<ffffffff812ea167>] __driver_attach+0x4a/0x66 > [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66 > [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89 > [<ffffffff812e9efd>] driver_attach+0x19/0x1b > [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204 > [<ffffffff812ea41b>] driver_register+0x98/0x109 > [<ffffffff813465dd>] usb_register_driver+0xb2/0x173 > [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb] > [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb] > [<ffffffff81000203>] do_one_initcall+0x6d/0x17a > [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0 > [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b > > Signed-off-by: Stephen Boyd <bebarino@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 3ae468c..f20d3ee 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -854,6 +854,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) BIT(NL80211_IFTYPE_WDS); /* + * Initialize configuration work. + */ + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); + + /* * Let the driver probe the device to detect the capabilities. */ retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev); @@ -863,11 +868,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) } /* - * Initialize configuration work. - */ - INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); - - /* * Allocate queue array. */ retval = rt2x00queue_allocate(rt2x00dev);
The rt2x00dev->intf_work workqueue is never initialized when a driver is probed for a non-existent device (in this case rt2500usb). On such a path we call rt2x00lib_remove_dev() to free any resources initialized during the probe before we use INIT_WORK to initialize the workqueue. This causes lockdep to get confused since the lock used in the workqueue hasn't been initialized yet but is now being acquired during cancel_work_sync() called by rt2x00lib_remove_dev(). Fix this by initializing the workqueue first before we attempt to probe the device. This should make lockdep happy and avoid breaking any assumptions about how the library cleans up after a probe fails. phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60 Call Trace: [<ffffffff8105fe59>] register_lock_class+0x152/0x31f [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111 [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4 [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81492aef>] ? _raw_spin_unlock_irqrestore+0x33/0x41 [<ffffffff810628d5>] lock_acquire+0xd1/0xf7 [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f136>] cancel_work_sync+0xb/0xd [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib] [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib] [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52 [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb] [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb] [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136 [<ffffffff812ea167>] __driver_attach+0x4a/0x66 [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66 [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89 [<ffffffff812e9efd>] driver_attach+0x19/0x1b [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204 [<ffffffff812ea41b>] driver_register+0x98/0x109 [<ffffffff813465dd>] usb_register_driver+0xb2/0x173 [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb] [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb] [<ffffffff81000203>] do_one_initcall+0x6d/0x17a [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0 [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b Signed-off-by: Stephen Boyd <bebarino@gmail.com> --- drivers/net/wireless/rt2x00/rt2x00dev.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)