diff mbox

[net-next,13/20] igb: enable WoL for OEM devices regardless of EEPROM setting

Message ID 1456287984-10459-14-git-send-email-jeffrey.t.kirsher@intel.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T Feb. 24, 2016, 4:26 a.m. UTC 
From: Todd Fujinaka <todd.fujinaka@intel.com>

Override EEPROM settings for specific OEM devices.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 0f7805c..cd3708b 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2584,6 +2584,26 @@  static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		adapter->wol = 0;
 	}
 
+	/* Some vendors want the ability to Use the EEPROM setting as
+	 * enable/disable only, and not for capability
+	 */
+	if (((hw->mac.type == e1000_i350) ||
+	     (hw->mac.type == e1000_i354)) &&
+	    (pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)) {
+		adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+		adapter->wol = 0;
+	}
+	if (hw->mac.type == e1000_i350) {
+		if (((pdev->subsystem_device == 0x5001) ||
+		     (pdev->subsystem_device == 0x5002)) &&
+				(hw->bus.func == 0)) {
+			adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+			adapter->wol = 0;
+		}
+		if (pdev->subsystem_device == 0x1F52)
+			adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+	}
+
 	device_set_wakeup_enable(&adapter->pdev->dev,
 				 adapter->flags & IGB_FLAG_WOL_SUPPORTED);