Patchwork [v3,2/4] omap3: nand: configurable fifo threshold to gain the throughput

login
register
mail settings
Submitter Sukumar Ghorai
Date July 13, 2010, 4:45 a.m.
Message ID <1278996337-25172-3-git-send-email-s-ghorai@ti.com>
Download mbox | patch
Permalink /patch/58711/
State New
Headers show

Comments

Sukumar Ghorai - July 13, 2010, 4:45 a.m.
Configure the FIFO THREASHOLD value different for read and write to keep busy both
  filling and to drain out of FIFO at reading and writing.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Vimal Singh <vimalsingh@ti.com>
---
 arch/arm/mach-omap2/gpmc.c             |   11 +++++++----
 arch/arm/plat-omap/include/plat/gpmc.h |    5 ++++-
 drivers/mtd/nand/omap2.c               |   24 +++++++++++++++---------
 3 files changed, 26 insertions(+), 14 deletions(-)

Patch

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2c100e4..d10041a 100755
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -58,7 +58,6 @@ 
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
-#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
 #define CS_NUM_SHIFT		24
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
@@ -592,15 +591,19 @@  EXPORT_SYMBOL(gpmc_nand_write);
 /**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
  * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
  */
-int gpmc_prefetch_enable(int cs, int dma_mode,
+int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
 
-	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
+		printk(KERN_ERR "PREFETCH Fifo Threshold is not supported\n");
+		return -1;
+	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
 
@@ -608,7 +611,7 @@  int gpmc_prefetch_enable(int cs, int dma_mode,
 		 * enable the engine. Set which cs is has requested for.
 		 */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD |
+					PREFETCH_FIFOTHRESHOLD(fifo_th) |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
 					(0x1 & is_write)));
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 054e704..fb82335 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -83,6 +83,9 @@ 
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
+#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define PREFETCH_FIFOTHRESHOLD(val)	(val << 8)
+
 /*
  * Note that all values in this struct are in nanoseconds, while
  * the register values are in gpmc_fck cycles.
@@ -133,7 +136,7 @@  extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 6a57743..d5fad84 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -275,7 +275,8 @@  static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	}
 
 	/* configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
 	if (ret) {
 		/* PFPW engine is busy, use cpu copy method */
 		if (info->nand.options & NAND_BUSWIDTH_16)
@@ -319,7 +320,8 @@  static void omap_write_buf_pref(struct mtd_info *mtd,
 	}
 
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
 	if (ret) {
 		/* PFPW engine is busy, use cpu copy method */
 		if (info->nand.options & NAND_BUSWIDTH_16)
@@ -373,10 +375,11 @@  static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	dma_addr_t dma_addr;
 	int ret;
 
-	/* The fifo depth is 64 bytes. We have a sync at each frame and frame
-	 * length is 64 bytes.
+	/* The fifo depth is 64 bytes max.
+	 * But configure the FIFO-threahold to 32 to get a sync at each frame
+	 * and frame length is 32 bytes.
 	 */
-	int buf_len = len >> 6;
+	int buf_len = len >> 5;
 
 	if (addr >= high_memory) {
 		struct page *p1;
@@ -415,7 +418,8 @@  static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 					OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
 	}
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX/2, 0x1, len, is_write);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy methode */
 		goto out_copy;
@@ -558,7 +562,8 @@  static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
 	init_completion(&info->comp);
 
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy methode */
 		goto out_copy;
@@ -603,8 +608,9 @@  static void omap_write_buf_irq_pref(struct mtd_info *mtd,
 	info->buf = (u_char *) buf;
 	init_completion(&info->comp);
 
-	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	/* configure and start prefetch transfer : size=24 */
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			(PREFETCH_FIFOTHRESHOLD_MAX*3)/8, 0x0, len, 0x1);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy methode */
 		goto out_copy;