diff mbox

[v6] Fix sun7i pin assignment for IRQ's

Message ID 1456161251-2303-1-git-send-email-henry@nitronetworks.nl
State New
Headers show

Commit Message

hp197 Feb. 22, 2016, 5:14 p.m. UTC 
After testing IRQ pins we found some bugs in the pinctrl declaration.
Both PI* and PC* pins didn't work. PI* pins seemed to be connected
to the wrong mux and PC* pins waren't working at all.

Please note that the A20 soc manual is contradicting between version
and even within the same document for both the PI and PC pins.

Patch is based on testing with the hardware itself.

Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Henry Paulissen <henry@nitronetworks.nl>

---

Changes in v2:
    After some more testing we found irq on PI pins.
    they where on mux6 so this is included in my patch.

    Also included is a warning for PI17, this pin was not working
    on apritzel his bPI and he thinks it might be correlated to
    GIC and IRQ 29.

Changes in v3:
    Changed name from nickname to realname in email and SoB.

Changes in v4:
    Added closing parenthesis for the C pins.

Changes in v5:
    Added a more detailed description.

Changes in v6:
    Removed extra comment about pin I17 (extra tests needed).
    Added tested and reviewed by tags.

---
 drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 32 ++++++++++++++-----------------
 1 file changed, 14 insertions(+), 18 deletions(-)

Comments

Maxime Ripard Feb. 25, 2016, 12:54 a.m. UTC | #1 
Hi,

Usually, the patch title should be prefixed by the subsystem it
applies to so that maintainer and reviewers can spot it more
easily. In this case, it would be something like

pinctrl: sunxi: Fix sun7i pin assignment for IRQ's

On Mon, Feb 22, 2016 at 06:14:07PM +0100, Henry Paulissen wrote:
> After testing IRQ pins we found some bugs in the pinctrl declaration.
> Both PI* and PC* pins didn't work. PI* pins seemed to be connected
> to the wrong mux and PC* pins waren't working at all.
> 
> Please note that the A20 soc manual is contradicting between version
> and even within the same document for both the PI and PC pins.

Which sections are in contradiction?

> Patch is based on testing with the hardware itself.

How did you test it? Using the sysfs API, or did you have any hardware
connected to it?

Thanks!
Maxime
Linus Walleij Feb. 25, 2016, 2:16 p.m. UTC | #2 
On Thu, Feb 25, 2016 at 1:54 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
>
> Usually, the patch title should be prefixed by the subsystem it
> applies to so that maintainer and reviewers can spot it more
> easily. In this case, it would be something like
>
> pinctrl: sunxi: Fix sun7i pin assignment for IRQ's
>
> On Mon, Feb 22, 2016 at 06:14:07PM +0100, Henry Paulissen wrote:
>> After testing IRQ pins we found some bugs in the pinctrl declaration.
>> Both PI* and PC* pins didn't work. PI* pins seemed to be connected
>> to the wrong mux and PC* pins waren't working at all.
>>
>> Please note that the A20 soc manual is contradicting between version
>> and even within the same document for both the PI and PC pins.
>
> Which sections are in contradiction?
>
>> Patch is based on testing with the hardware itself.
>
> How did you test it? Using the sysfs API, or did you have any hardware
> connected to it?

I'm taking this patch out of my tree now following Maxime's comments.

I'm a bit annoyed that it is iterating too quickly as well, I will
wait and see for a while.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Maxime Ripard Feb. 25, 2016, 5:42 p.m. UTC | #3 
Hi,

On Thu, Feb 25, 2016 at 06:26:22AM -0800, Henry Paulissen wrote:
> 
> 
> Op donderdag 25 februari 2016 15:16:49 UTC+1 schreef Linus Walleij:
> 
> >
> > I'm taking this patch out of my tree now following Maxime's comments. 
> >
> > I'm a bit annoyed that it is iterating too quickly as well, I will 
> > wait and see for a while. 
> >
> >  
> All of Maxime his questions where already answered in a reply to him at:
> Date: Sun, 21 Feb 2016 11:27:46 -0800 (PST)

And I was not among the recipients of that mail, please try to keep
everyone in Cc.

Commenting on it right now....

Maxime
diff mbox

Patch

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
index cf1ce0c..435ad30 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
@@ -343,26 +343,22 @@  static const struct sunxi_desc_pin sun7i_a20_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE4 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* CS0 */
-		  SUNXI_FUNCTION_IRQ(0x6, 12)),		/* EINT12 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* CS0 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 20),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE5 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* CLK */
-		  SUNXI_FUNCTION_IRQ(0x6, 13)),		/* EINT13 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* CLK */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 21),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE6 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* MOSI */
-		  SUNXI_FUNCTION_IRQ(0x6, 14)),		/* EINT14 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* MOSI */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 22),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE7 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* MISO */
-		  SUNXI_FUNCTION_IRQ(0x6, 15)),		/* EINT15 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* MISO */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 23),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -960,65 +956,65 @@  static const struct sunxi_desc_pin sun7i_a20_pins[] = {
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS0 */
 		  SUNXI_FUNCTION(0x3, "uart5"),		/* TX */
-		  SUNXI_FUNCTION_IRQ(0x5, 22)),		/* EINT22 */
+		  SUNXI_FUNCTION_IRQ(0x6, 22)),		/* EINT22 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 11),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* CLK */
 		  SUNXI_FUNCTION(0x3, "uart5"),		/* RX */
-		  SUNXI_FUNCTION_IRQ(0x5, 23)),		/* EINT23 */
+		  SUNXI_FUNCTION_IRQ(0x6, 23)),		/* EINT23 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 12),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* MOSI */
 		  SUNXI_FUNCTION(0x3, "uart6"),		/* TX */
 		  SUNXI_FUNCTION(0x4, "clk_out_a"),	/* CLK_OUT_A */
-		  SUNXI_FUNCTION_IRQ(0x5, 24)),		/* EINT24 */
+		  SUNXI_FUNCTION_IRQ(0x6, 24)),		/* EINT24 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 13),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* MISO */
 		  SUNXI_FUNCTION(0x3, "uart6"),		/* RX */
 		  SUNXI_FUNCTION(0x4, "clk_out_b"),	/* CLK_OUT_B */
-		  SUNXI_FUNCTION_IRQ(0x5, 25)),		/* EINT25 */
+		  SUNXI_FUNCTION_IRQ(0x6, 25)),		/* EINT25 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 14),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS1 */
 		  SUNXI_FUNCTION(0x3, "ps2"),		/* SCK1 */
 		  SUNXI_FUNCTION(0x4, "timer4"),	/* TCLKIN0 */
-		  SUNXI_FUNCTION_IRQ(0x5, 26)),		/* EINT26 */
+		  SUNXI_FUNCTION_IRQ(0x6, 26)),		/* EINT26 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 15),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS1 */
 		  SUNXI_FUNCTION(0x3, "ps2"),		/* SDA1 */
 		  SUNXI_FUNCTION(0x4, "timer5"),	/* TCLKIN1 */
-		  SUNXI_FUNCTION_IRQ(0x5, 27)),		/* EINT27 */
+		  SUNXI_FUNCTION_IRQ(0x6, 27)),		/* EINT27 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 16),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* RTS */
-		  SUNXI_FUNCTION_IRQ(0x5, 28)),		/* EINT28 */
+		  SUNXI_FUNCTION_IRQ(0x6, 28)),		/* EINT28 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 17),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* CTS */
-		  SUNXI_FUNCTION_IRQ(0x5, 29)),		/* EINT29 */
+		  SUNXI_FUNCTION_IRQ(0x6, 29)),		/* EINT29 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 18),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* TX */
-		  SUNXI_FUNCTION_IRQ(0x5, 30)),		/* EINT30 */
+		  SUNXI_FUNCTION_IRQ(0x6, 30)),		/* EINT30 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 19),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
-		  SUNXI_FUNCTION_IRQ(0x5, 31)),		/* EINT31 */
+		  SUNXI_FUNCTION_IRQ(0x6, 31)),		/* EINT31 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 20),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),