@@ -518,13 +518,6 @@ struct i40e_vsi {
struct i40e_ring **tx_rings;
u16 work_limit;
- /* high bit set means dynamic, use accessor routines to read/write.
- * hardware only supports 2us resolution for the ITR registers.
- * these values always store the USER setting, and must be converted
- * before programming to a register.
- */
- u16 rx_itr_setting;
- u16 tx_itr_setting;
u16 int_rate_limit; /* value in usecs */
u16 rss_table_size; /* HW RSS table size */
@@ -302,6 +302,10 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
" rx_rings[%i]: vsi = %p, q_vector = %p\n",
i, rx_ring->vsi,
rx_ring->q_vector);
+ dev_info(&pf->pdev->dev,
+ " rx_rings[%i]: rx_itr_setting = %d (%s)\n",
+ i, rx_ring->rx_itr_setting,
+ ITR_IS_DYNAMIC(rx_ring->rx_itr_setting) ? "dynamic" : "fixed");
}
for (i = 0; i < vsi->num_queue_pairs; i++) {
struct i40e_ring *tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
@@ -352,14 +356,15 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
dev_info(&pf->pdev->dev,
" tx_rings[%i]: DCB tc = %d\n",
i, tx_ring->dcb_tc);
+ dev_info(&pf->pdev->dev,
+ " tx_rings[%i]: tx_itr_setting = %d (%s)\n",
+ i, tx_ring->tx_itr_setting,
+ ITR_IS_DYNAMIC(tx_ring->tx_itr_setting) ? "dynamic" : "fixed");
}
rcu_read_unlock();
dev_info(&pf->pdev->dev,
- " work_limit = %d, rx_itr_setting = %d (%s), tx_itr_setting = %d (%s)\n",
- vsi->work_limit, vsi->rx_itr_setting,
- ITR_IS_DYNAMIC(vsi->rx_itr_setting) ? "dynamic" : "fixed",
- vsi->tx_itr_setting,
- ITR_IS_DYNAMIC(vsi->tx_itr_setting) ? "dynamic" : "fixed");
+ " work_limit = %d\n",
+ vsi->work_limit);
dev_info(&pf->pdev->dev,
" max_frame = %d, rx_hdr_len = %d, rx_buf_len = %d dtype = %d\n",
vsi->max_frame, vsi->rx_hdr_len, vsi->rx_buf_len, vsi->dtype);
@@ -1855,8 +1855,9 @@ static int i40e_set_phys_id(struct net_device *netdev,
* 125us (8000 interrupts per second) == ITR(62)
*/
-static int i40e_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
+static int __i40e_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec,
+ int queue)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
@@ -1864,14 +1865,24 @@ static int i40e_get_coalesce(struct net_device *netdev,
ec->tx_max_coalesced_frames_irq = vsi->work_limit;
ec->rx_max_coalesced_frames_irq = vsi->work_limit;
- if (ITR_IS_DYNAMIC(vsi->rx_itr_setting))
+ /* rx and tx usecs has per queue value. If user doesn't specify the queue,
+ * return queue 0's value to represent.
+ */
+ if (queue < 0) {
+ queue = 0;
+ } else if (queue >= vsi->num_queue_pairs) {
+ return -EINVAL;
+ }
+
+ if (ITR_IS_DYNAMIC(vsi->rx_rings[queue]->rx_itr_setting))
ec->use_adaptive_rx_coalesce = 1;
- if (ITR_IS_DYNAMIC(vsi->tx_itr_setting))
+ if (ITR_IS_DYNAMIC(vsi->tx_rings[queue]->tx_itr_setting))
ec->use_adaptive_tx_coalesce = 1;
- ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC;
- ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+ ec->rx_coalesce_usecs = vsi->rx_rings[queue]->rx_itr_setting & ~I40E_ITR_DYNAMIC;
+ ec->tx_coalesce_usecs = vsi->tx_rings[queue]->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+
/* we use the _usecs_high to store/set the interrupt rate limit
* that the hardware supports, that almost but not quite
* fits the original intent of the ethtool variable,
@@ -1884,15 +1895,57 @@ static int i40e_get_coalesce(struct net_device *netdev,
return 0;
}
-static int i40e_set_coalesce(struct net_device *netdev,
+static int i40e_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
- struct i40e_netdev_priv *np = netdev_priv(netdev);
+ return __i40e_get_coalesce(netdev, ec, -1);
+}
+
+static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
+ struct ethtool_coalesce *ec,
+ int queue)
+{
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_hw *hw = &pf->hw;
struct i40e_q_vector *q_vector;
+ u16 vector, intrl;
+
+ intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
+
+ vsi->rx_rings[queue]->rx_itr_setting = ec->rx_coalesce_usecs;
+ vsi->tx_rings[queue]->tx_itr_setting = ec->tx_coalesce_usecs;
+
+ if (ec->use_adaptive_rx_coalesce)
+ vsi->rx_rings[queue]->rx_itr_setting |= I40E_ITR_DYNAMIC;
+ else
+ vsi->rx_rings[queue]->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+ if (ec->use_adaptive_tx_coalesce)
+ vsi->tx_rings[queue]->tx_itr_setting |= I40E_ITR_DYNAMIC;
+ else
+ vsi->tx_rings[queue]->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+ q_vector = vsi->rx_rings[queue]->q_vector;
+ q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[queue]->rx_itr_setting);
+ vector = vsi->base_vector + q_vector->v_idx;
+ wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1), q_vector->rx.itr);
+
+ q_vector = vsi->tx_rings[queue]->q_vector;
+ q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[queue]->tx_itr_setting);
+ vector = vsi->base_vector + q_vector->v_idx;
+ wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1), q_vector->tx.itr);
+
+ wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
+ i40e_flush(hw);
+}
+
+static int __i40e_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec,
+ int queue)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
- struct i40e_hw *hw = &pf->hw;
- u16 vector;
int i;
if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
@@ -1909,59 +1962,49 @@ static int i40e_set_coalesce(struct net_device *netdev,
return -EINVAL;
}
- vector = vsi->base_vector;
- if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
- (ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
- vsi->rx_itr_setting = ec->rx_coalesce_usecs;
- } else if (ec->rx_coalesce_usecs == 0) {
- vsi->rx_itr_setting = ec->rx_coalesce_usecs;
+ if (ec->rx_coalesce_usecs == 0) {
if (ec->use_adaptive_rx_coalesce)
netif_info(pf, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
- } else {
- netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
- return -EINVAL;
+ } else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+ (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+ netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
+ return -EINVAL;
}
vsi->int_rate_limit = ec->rx_coalesce_usecs_high;
- if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
- (ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
- vsi->tx_itr_setting = ec->tx_coalesce_usecs;
- } else if (ec->tx_coalesce_usecs == 0) {
- vsi->tx_itr_setting = ec->tx_coalesce_usecs;
+ if (ec->tx_coalesce_usecs == 0) {
if (ec->use_adaptive_tx_coalesce)
netif_info(pf, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
- } else {
- netif_info(pf, drv, netdev,
- "Invalid value, tx-usecs range is 0-8160\n");
- return -EINVAL;
+ } else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+ (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+ netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
+ return -EINVAL;
}
- if (ec->use_adaptive_rx_coalesce)
- vsi->rx_itr_setting |= I40E_ITR_DYNAMIC;
- else
- vsi->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
- if (ec->use_adaptive_tx_coalesce)
- vsi->tx_itr_setting |= I40E_ITR_DYNAMIC;
- else
- vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
- for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
- u16 intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
-
- q_vector = vsi->q_vectors[i];
- q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
- wr32(hw, I40E_PFINT_ITRN(0, vector - 1), q_vector->rx.itr);
- q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
- wr32(hw, I40E_PFINT_ITRN(1, vector - 1), q_vector->tx.itr);
- wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
- i40e_flush(hw);
+ /* rx and tx usecs has per queue value. If user doesn't specify the queue,
+ * apply to all queues.
+ */
+ if (queue < 0) {
+ for (i = 0; i < vsi->num_queue_pairs; i++)
+ i40e_set_itr_per_queue(vsi, ec, i);
+ } else if (queue < vsi->num_queue_pairs) {
+ i40e_set_itr_per_queue(vsi, ec, queue);
+ } else {
+ netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
+ vsi->num_queue_pairs - 1);
+ return -EINVAL;
}
return 0;
}
+static int i40e_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ return __i40e_set_coalesce(netdev, ec, -1);
+}
+
/**
* i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
* @pf: pointer to the physical function struct
@@ -3124,11 +3124,11 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
struct i40e_q_vector *q_vector = vsi->q_vectors[i];
q_vector->itr_countdown = ITR_COUNTDOWN_START;
- q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+ q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[i]->rx_itr_setting);
q_vector->rx.latency_range = I40E_LOW_LATENCY;
wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
q_vector->rx.itr);
- q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
+ q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[i]->tx_itr_setting);
q_vector->tx.latency_range = I40E_LOW_LATENCY;
wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
q_vector->tx.itr);
@@ -3220,10 +3220,10 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
/* set the ITR configuration */
q_vector->itr_countdown = ITR_COUNTDOWN_START;
- q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+ q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[0]->rx_itr_setting);
q_vector->rx.latency_range = I40E_LOW_LATENCY;
wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
- q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
+ q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[0]->tx_itr_setting);
q_vector->tx.latency_range = I40E_LOW_LATENCY;
wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
@@ -7306,8 +7306,6 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
set_bit(__I40E_DOWN, &vsi->state);
vsi->flags = 0;
vsi->idx = vsi_idx;
- vsi->rx_itr_setting = pf->rx_itr_default;
- vsi->tx_itr_setting = pf->tx_itr_default;
vsi->int_rate_limit = 0;
vsi->rss_table_size = (vsi->type == I40E_VSI_MAIN) ?
pf->rss_table_size : 64;
@@ -7476,6 +7474,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi)
tx_ring->flags = I40E_TXR_FLAGS_WB_ON_ITR;
if (vsi->back->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE)
tx_ring->flags |= I40E_TXR_FLAGS_OUTER_UDP_CSUM;
+ tx_ring->tx_itr_setting = pf->tx_itr_default;
vsi->tx_rings[i] = tx_ring;
rx_ring = &tx_ring[1];
@@ -7492,6 +7491,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi)
set_ring_16byte_desc_enabled(rx_ring);
else
clear_ring_16byte_desc_enabled(rx_ring);
+ rx_ring->rx_itr_setting = pf->rx_itr_default;
vsi->rx_rings[i] = rx_ring;
}
@@ -1913,6 +1913,7 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
bool rx = false, tx = false;
u32 rxval, txval;
int vector;
+ int idx = q_vector->v_idx;
vector = (q_vector->v_idx + vsi->base_vector);
@@ -1922,17 +1923,17 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
if (q_vector->itr_countdown > 0 ||
- (!ITR_IS_DYNAMIC(vsi->rx_itr_setting) &&
- !ITR_IS_DYNAMIC(vsi->tx_itr_setting))) {
+ (!ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting) &&
+ !ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting))) {
goto enable_int;
}
- if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) {
+ if (ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting)) {
rx = i40e_set_new_dynamic_itr(&q_vector->rx);
rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr);
}
- if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) {
+ if (ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting)) {
tx = i40e_set_new_dynamic_itr(&q_vector->tx);
txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr);
}
@@ -249,6 +249,14 @@ struct i40e_ring {
u8 dcb_tc; /* Traffic class of ring */
u8 __iomem *tail;
+ /* high bit set means dynamic, use accessor routines to read/write.
+ * hardware only supports 2us resolution for the ITR registers.
+ * these values always store the USER setting, and must be converted
+ * before programming to a register.
+ */
+ u16 rx_itr_setting;
+ u16 tx_itr_setting;
+
u16 count; /* Number of descriptors */
u16 reg_idx; /* HW register index of the ring */
u16 rx_hdr_len;