@@ -315,6 +315,8 @@ struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space,
bool ipv6_opt_accepted(const struct sock *sk, const struct sk_buff *skb,
const struct inet6_skb_parm *opt);
+struct ipv6_txoptions *ipv6_update_options(struct sock *sk,
+ struct ipv6_txoptions *opt);
static inline bool ipv6_accept_ra(struct inet6_dev *idev)
{
@@ -226,6 +226,9 @@ struct netlbl_lsm_secattr {
* @doi_getdef: returns a reference to a DOI
* @doi_putdef: releases a reference of a DOI
* @doi_walk: enumerate the DOI list
+ * @sock_getattr: retrieve the socket's attr
+ * @sock_setattr: set the socket's attr
+ * @sock_delattr: remove the socket's attr
*
* Description:
* This structure is filled out by the CALIPSO engine and passed
@@ -243,6 +246,12 @@ struct netlbl_calipso_ops {
int (*doi_walk)(u32 *skip_cnt,
int (*callback)(struct calipso_doi *doi_def, void *arg),
void *cb_arg);
+ int (*sock_getattr)(struct sock *sk,
+ struct netlbl_lsm_secattr *secattr);
+ int (*sock_setattr)(struct sock *sk,
+ const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr);
+ void (*sock_delattr)(struct sock *sk);
};
/*
@@ -143,6 +143,7 @@ struct in6_flowlabel_req {
#define IPV6_TLV_PAD1 0
#define IPV6_TLV_PADN 1
#define IPV6_TLV_ROUTERALERT 5
+#define IPV6_TLV_CALIPSO 7 /* RFC 5570 */
#define IPV6_TLV_JUMBO 194
#define IPV6_TLV_HAO 201 /* home address option */
@@ -44,6 +44,24 @@
#include <linux/atomic.h>
#include <linux/bug.h>
#include <asm/unaligned.h>
+#include <linux/crc-ccitt.h>
+
+/* Maximium size of the calipso option including
+ * the two-byte TLV header.
+ */
+#define CALIPSO_OPT_LEN_MAX (2 + 252)
+
+/* Size of the minimum calipso option including
+ * the two-byte TLV header.
+ */
+#define CALIPSO_HDR_LEN (2 + 8)
+
+/* Maximium size of the calipso option including
+ * the two-byte TLV header and upto 3 bytes of
+ * leading pad and 7 bytes of trailing pad.
+ */
+#define CALIPSO_OPT_LEN_MAX_WITH_PAD (3 + CALIPSO_OPT_LEN_MAX + 7)
+
/* List of available DOI definitions */
static DEFINE_SPINLOCK(calipso_doi_list_lock);
@@ -297,6 +315,580 @@ doi_walk_return:
return ret_val;
}
+/**
+ * calipso_map_cat_hton - Perform a category mapping from host to network
+ * @doi_def: the DOI definition
+ * @secattr: the security attributes
+ * @net_cat: the zero'd out category bitmap in network/CALIPSO format
+ * @net_cat_len: the length of the CALIPSO bitmap in bytes
+ *
+ * Description:
+ * Perform a label mapping to translate a local MLS category bitmap to the
+ * correct CALIPSO bitmap using the given DOI definition. Returns the minimum
+ * size in bytes of the network bitmap on success, negative values otherwise.
+ *
+ */
+static int calipso_map_cat_hton(const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr,
+ unsigned char *net_cat,
+ u32 net_cat_len)
+{
+ int spot = -1;
+ u32 net_spot_max = 0;
+ u32 net_clen_bits = net_cat_len * 8;
+
+ for (;;) {
+ spot = netlbl_catmap_walk(secattr->attr.mls.cat,
+ spot + 1);
+ if (spot < 0)
+ break;
+ if (spot >= net_clen_bits)
+ return -ENOSPC;
+ netlbl_bitmap_setbit(net_cat, spot, 1);
+
+ if (spot > net_spot_max)
+ net_spot_max = spot;
+ }
+
+ return (net_spot_max / 32 + 1) * 4;
+}
+
+/**
+ * calipso_map_cat_ntoh - Perform a category mapping from network to host
+ * @doi_def: the DOI definition
+ * @net_cat: the category bitmap in network/CALIPSO format
+ * @net_cat_len: the length of the CALIPSO bitmap in bytes
+ * @secattr: the security attributes
+ *
+ * Description:
+ * Perform a label mapping to translate a CALIPSO bitmap to the correct local
+ * MLS category bitmap using the given DOI definition. Returns zero on
+ * success, negative values on failure.
+ *
+ */
+static int calipso_map_cat_ntoh(const struct calipso_doi *doi_def,
+ const unsigned char *net_cat,
+ u32 net_cat_len,
+ struct netlbl_lsm_secattr *secattr)
+{
+ int ret_val;
+ int spot = -1;
+ u32 net_clen_bits = net_cat_len * 8;
+
+ for (;;) {
+ spot = netlbl_bitmap_walk(net_cat,
+ net_clen_bits,
+ spot + 1,
+ 1);
+ if (spot < 0) {
+ if (spot == -2)
+ return -EFAULT;
+ return 0;
+ }
+
+ ret_val = netlbl_catmap_setbit(&secattr->attr.mls.cat,
+ spot,
+ GFP_ATOMIC);
+ if (ret_val != 0)
+ return ret_val;
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * calipso_pad_write - Writes pad bytes in TLV format
+ * @buf: the buffer
+ * @offset: offset from start of buffer to write padding
+ * @count: number of pad bytes to write
+ *
+ * Description:
+ * Write @count bytes of TLV padding into @buffer starting at offset @offset.
+ * @count should be less than 8 - see RFC 4942.
+ *
+ */
+static int calipso_pad_write(unsigned char *buf, unsigned int offset,
+ unsigned int count)
+{
+ if (WARN_ON_ONCE(count >= 8))
+ return -EINVAL;
+
+ switch (count) {
+ case 0:
+ break;
+ case 1:
+ buf[offset] = IPV6_TLV_PAD1;
+ break;
+ default:
+ buf[offset] = IPV6_TLV_PADN;
+ buf[offset + 1] = count - 2;
+ if (count > 2)
+ memset(buf + offset + 2, 0, count - 2);
+ break;
+ }
+ return 0;
+}
+
+/**
+ * calipso_genopt - Generate a CALIPSO option
+ * @buf: the option buffer
+ * @start: offset from which to write
+ * @buf_len: the size of opt_buf
+ * @doi_def: the CALIPSO DOI to use
+ * @secattr: the security attributes
+ *
+ * Description:
+ * Generate a CALIPSO option using the DOI definition and security attributes
+ * passed to the function. This also generates upto three bytes of leading
+ * padding that ensures that the option is 4n + 2 aligned. It returns the
+ * number of bytes written (including any initial padding).
+ */
+static int calipso_genopt(unsigned char *buf, u32 start, u32 buf_len,
+ const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr)
+{
+ int ret_val;
+ u32 len, pad;
+ u16 crc;
+ static const unsigned char padding[4] = {2, 1, 0, 3};
+ unsigned char *calipso;
+
+ /* CALIPSO has 4n + 2 alignment */
+ pad = padding[start & 3];
+ if (buf_len <= start + pad + CALIPSO_HDR_LEN)
+ return -ENOSPC;
+
+ if ((secattr->flags & NETLBL_SECATTR_MLS_LVL) == 0)
+ return -EPERM;
+
+ len = CALIPSO_HDR_LEN;
+
+ if (secattr->flags & NETLBL_SECATTR_MLS_CAT) {
+ ret_val = calipso_map_cat_hton(doi_def,
+ secattr,
+ buf + start + pad + len,
+ buf_len - start - pad - len);
+ if (ret_val < 0)
+ return ret_val;
+ len += ret_val;
+ }
+
+ calipso_pad_write(buf, start, pad);
+ calipso = buf + start + pad;
+
+ calipso[0] = IPV6_TLV_CALIPSO;
+ calipso[1] = len - 2;
+ *(__be32 *)(calipso + 2) = htonl(doi_def->doi);
+ calipso[6] = (len - CALIPSO_HDR_LEN) / 4;
+ calipso[7] = secattr->attr.mls.lvl,
+ crc = ~crc_ccitt(0xffff, calipso, len);
+ calipso[8] = crc & 0xff;
+ calipso[9] = (crc >> 8) & 0xff;
+ return pad + len;
+}
+
+/* Hop-by-hop hdr helper functions
+ */
+
+/**
+ * calipso_opt_update - Replaces socket's hop options with a new set
+ * @sk: the socket
+ * @hop: new hop options
+ *
+ * Description:
+ * Replaces @sk's hop options with @hop. @hop may be NULL to leave
+ * the socket with no hop options.
+ *
+ */
+static int calipso_opt_update(struct sock *sk, struct ipv6_opt_hdr *hop)
+{
+ struct ipv6_txoptions *old = txopt_get(inet6_sk(sk)), *txopts;
+
+ txopts = ipv6_renew_options_kern(sk, old, IPV6_HOPOPTS,
+ hop, hop ? ipv6_optlen(hop) : 0);
+ txopt_put(old);
+ if (IS_ERR(txopts))
+ return PTR_ERR(txopts);
+
+ txopts = ipv6_update_options(sk, txopts);
+ if (txopts) {
+ atomic_sub(txopts->tot_len, &sk->sk_omem_alloc);
+ txopt_put(txopts);
+ }
+
+ return 0;
+}
+
+/**
+ * calipso_tlv_len - Returns the length of the TLV
+ * @opt: the option header
+ * @offset: offset of the TLV within the header
+ *
+ * Description:
+ * Returns the length of the TLV option at offset @offset within
+ * the option header @opt. Checks that the entire TLV fits inside
+ * the option header, returns a negative value if this is not the case.
+ */
+static int calipso_tlv_len(struct ipv6_opt_hdr *opt, unsigned int offset)
+{
+ unsigned char *tlv = (unsigned char *)opt;
+ unsigned int opt_len = ipv6_optlen(opt), tlv_len;
+
+ if (offset < sizeof(*opt) || offset >= opt_len)
+ return -EINVAL;
+ if (tlv[offset] == IPV6_TLV_PAD1)
+ return 1;
+ if (offset + 1 >= opt_len)
+ return -EINVAL;
+ tlv_len = tlv[offset + 1] + 2;
+ if (offset + tlv_len > opt_len)
+ return -EINVAL;
+ return tlv_len;
+}
+
+/**
+ * calipso_opt_find - Finds the CALIPSO option in an IPv6 hop options header
+ * @hop: the hop options header
+ * @start: on return holds the offset of any leading padding
+ * @end: on return holds the offset of the first non-pad TLV after CALIPSO
+ *
+ * Description:
+ * Finds the space occupied by a CALIPSO option (including any leading and
+ * trailing padding).
+ *
+ * If a CALIPSO option exists set @start and @end to the
+ * offsets within @hop of the start of padding before the first
+ * CALIPSO option and the end of padding after the first CALIPSO
+ * option. In this case the function returns 0.
+ *
+ * In the absence of a CALIPSO option, @start and @end will be
+ * set to the start and end of any trailing padding in the header.
+ * This is useful when appending a new option, as the caller may want
+ * to overwrite some of this padding. In this case the function will
+ * return -ENOENT.
+ */
+static int calipso_opt_find(struct ipv6_opt_hdr *hop, unsigned int *start,
+ unsigned int *end)
+{
+ int ret_val = -ENOENT, tlv_len;
+ unsigned int opt_len, offset, offset_s = 0, offset_e = 0;
+ unsigned char *opt = (unsigned char *)hop;
+
+ opt_len = ipv6_optlen(hop);
+ offset = sizeof(*hop);
+
+ while (offset < opt_len) {
+ tlv_len = calipso_tlv_len(hop, offset);
+ if (tlv_len < 0)
+ return tlv_len;
+
+ switch (opt[offset]) {
+ case IPV6_TLV_PAD1:
+ case IPV6_TLV_PADN:
+ if (offset_e)
+ offset_e = offset;
+ break;
+ case IPV6_TLV_CALIPSO:
+ ret_val = 0;
+ offset_e = offset;
+ break;
+ default:
+ if (offset_e == 0)
+ offset_s = offset;
+ else
+ goto out;
+ }
+ offset += tlv_len;
+ }
+
+out:
+ if (offset_s)
+ *start = offset_s + calipso_tlv_len(hop, offset_s);
+ else
+ *start = sizeof(*hop);
+ if (offset_e)
+ *end = offset_e + calipso_tlv_len(hop, offset_e);
+ else
+ *end = opt_len;
+
+ return ret_val;
+}
+
+/**
+ * calipso_opt_insert - Inserts a CALIPSO option into an IPv6 hop opt hdr
+ * @hop: the original hop options header
+ * @doi_def: the CALIPSO DOI to use
+ * @secattr: the specific security attributes of the socket
+ *
+ * Description:
+ * Creates a new hop options header based on @hop with a
+ * CALIPSO option added to it. If @hop already contains a CALIPSO
+ * option this is overwritten, otherwise the new option is appended
+ * after any existing options. If @hop is NULL then the new header
+ * will contain just the CALIPSO option and any needed padding.
+ *
+ */
+static struct ipv6_opt_hdr *
+calipso_opt_insert(struct ipv6_opt_hdr *hop,
+ const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr)
+{
+ unsigned int start, end, buf_len, pad, hop_len;
+ struct ipv6_opt_hdr *new;
+ int ret_val;
+
+ if (hop) {
+ hop_len = ipv6_optlen(hop);
+ ret_val = calipso_opt_find(hop, &start, &end);
+ if (ret_val && ret_val != -ENOENT)
+ return ERR_PTR(ret_val);
+ } else {
+ hop_len = 0;
+ start = sizeof(*hop);
+ end = 0;
+ }
+
+ buf_len = hop_len + start - end + CALIPSO_OPT_LEN_MAX_WITH_PAD;
+ new = kzalloc(buf_len, GFP_ATOMIC);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+
+ if (start > sizeof(*hop))
+ memcpy(new, hop, start);
+ ret_val = calipso_genopt((unsigned char *)new, start, buf_len, doi_def,
+ secattr);
+ if (ret_val < 0)
+ return ERR_PTR(ret_val);
+
+ buf_len = start + ret_val;
+ /* At this point buf_len aligns to 4n, so (buf_len & 4) pads to 8n */
+ pad = ((buf_len & 4) + (end & 7)) & 7;
+ calipso_pad_write((unsigned char *)new, buf_len, pad);
+ buf_len += pad;
+
+ if (end != hop_len) {
+ memcpy((char *)new + buf_len, (char *)hop + end, hop_len - end);
+ buf_len += hop_len - end;
+ }
+ new->nexthdr = 0;
+ new->hdrlen = buf_len / 8 - 1;
+
+ return new;
+}
+
+/**
+ * calipso_opt_del - Removes the CALIPSO option from an option header
+ * @hop: the original header
+ * @new: the new header
+ *
+ * Description:
+ * Creates a new header based on @hop without any CALIPSO option. If @hop
+ * doesn't contain a CALIPSO option it returns -ENOENT. If @hop contains
+ * no other non-padding options, it returns zero with @new set to NULL.
+ * Otherwise it returns zero, creates a new header without the CALIPSO
+ * option (and removing as much padding as possible) and returns with
+ * @new set to that header.
+ *
+ */
+static int calipso_opt_del(struct ipv6_opt_hdr *hop,
+ struct ipv6_opt_hdr **new)
+{
+ int ret_val;
+ unsigned int start, end, delta, pad, hop_len;
+
+ ret_val = calipso_opt_find(hop, &start, &end);
+ if (ret_val)
+ return ret_val;
+
+ hop_len = ipv6_optlen(hop);
+ if (start == sizeof(*hop) && end == hop_len) {
+ /* There's no other option in the header so return NULL */
+ *new = NULL;
+ return 0;
+ }
+
+ delta = (end - start) & ~7;
+ *new = kzalloc(hop_len - delta, GFP_ATOMIC);
+ if (!*new)
+ return -ENOMEM;
+
+ memcpy(*new, hop, start);
+ (*new)->hdrlen -= delta / 8;
+ pad = (end - start) & 7;
+ calipso_pad_write((unsigned char *)*new, start, pad);
+ if (end != hop_len)
+ memcpy((char *)*new + start + pad, (char *)hop + end,
+ hop_len - end);
+
+ return 0;
+}
+
+/**
+ * calipso_opt_getattr - Get the security attributes from a memory block
+ * @calipso: the CALIPSO option
+ * @secattr: the security attributes
+ *
+ * Description:
+ * Inspect @calipso and return the security attributes in @secattr.
+ * Returns zero on success and negative values on failure.
+ *
+ */
+static int calipso_opt_getattr(const unsigned char *calipso,
+ struct netlbl_lsm_secattr *secattr)
+{
+ int ret_val = -ENOMSG;
+ u32 doi, len = calipso[1], cat_len = calipso[6] * 4;
+ struct calipso_doi *doi_def;
+
+ if (cat_len + 8 > len)
+ return -EINVAL;
+
+ doi = get_unaligned_be32(calipso + 2);
+ rcu_read_lock();
+ doi_def = calipso_doi_search(doi);
+ if (!doi_def)
+ goto getattr_return;
+
+ secattr->attr.mls.lvl = calipso[7];
+ secattr->flags |= NETLBL_SECATTR_MLS_LVL;
+
+ if (cat_len) {
+ ret_val = calipso_map_cat_ntoh(doi_def,
+ calipso + 10,
+ cat_len,
+ secattr);
+ if (ret_val != 0) {
+ netlbl_catmap_free(secattr->attr.mls.cat);
+ goto getattr_return;
+ }
+
+ secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+ }
+
+ secattr->type = NETLBL_NLTYPE_CALIPSO;
+
+getattr_return:
+ rcu_read_unlock();
+ return ret_val;
+}
+
+/* sock functions.
+ */
+
+/**
+ * calipso_sock_getattr - Get the security attributes from a sock
+ * @sk: the sock
+ * @secattr: the security attributes
+ *
+ * Description:
+ * Query @sk to see if there is a CALIPSO option attached to the sock and if
+ * there is return the CALIPSO security attributes in @secattr. This function
+ * requires that @sk be locked, or privately held, but it does not do any
+ * locking itself. Returns zero on success and negative values on failure.
+ *
+ */
+static int calipso_sock_getattr(struct sock *sk,
+ struct netlbl_lsm_secattr *secattr)
+{
+ struct ipv6_opt_hdr *hop;
+ int opt_len, len, ret_val = -ENOMSG, offset;
+ unsigned char *opt;
+ struct ipv6_txoptions *txopts = txopt_get(inet6_sk(sk));
+
+ if (!txopts || !txopts->hopopt)
+ goto done;
+
+ hop = txopts->hopopt;
+ opt = (unsigned char *)hop;
+ opt_len = ipv6_optlen(hop);
+ offset = sizeof(*hop);
+ while (offset < opt_len) {
+ len = calipso_tlv_len(hop, offset);
+ if (len < 0) {
+ ret_val = len;
+ goto done;
+ }
+ switch (opt[offset]) {
+ case IPV6_TLV_CALIPSO:
+ if (len < CALIPSO_HDR_LEN)
+ ret_val = -EINVAL;
+ else
+ ret_val = calipso_opt_getattr(&opt[offset],
+ secattr);
+ goto done;
+ default:
+ offset += len;
+ break;
+ }
+ }
+done:
+ txopt_put(txopts);
+ return ret_val;
+}
+
+/**
+ * calipso_sock_setattr - Add a CALIPSO option to a socket
+ * @sk: the socket
+ * @doi_def: the CALIPSO DOI to use
+ * @secattr: the specific security attributes of the socket
+ *
+ * Description:
+ * Set the CALIPSO option on the given socket using the DOI definition and
+ * security attributes passed to the function. This function requires
+ * exclusive access to @sk, which means it either needs to be in the
+ * process of being created or locked. Returns zero on success and negative
+ * values on failure.
+ *
+ */
+static int calipso_sock_setattr(struct sock *sk,
+ const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr)
+{
+ int ret_val;
+ struct ipv6_opt_hdr *old, *new;
+ struct ipv6_txoptions *txopts = txopt_get(inet6_sk(sk));
+
+ old = NULL;
+ if (txopts)
+ old = txopts->hopopt;
+
+ new = calipso_opt_insert(old, doi_def, secattr);
+ txopt_put(txopts);
+ if (IS_ERR(new))
+ return PTR_ERR(new);
+
+ ret_val = calipso_opt_update(sk, new);
+
+ kfree(new);
+ return ret_val;
+}
+
+/**
+ * calipso_sock_delattr - Delete the CALIPSO option from a socket
+ * @sk: the socket
+ *
+ * Description:
+ * Removes the CALIPSO option from a socket, if present.
+ *
+ */
+static void calipso_sock_delattr(struct sock *sk)
+{
+ struct ipv6_opt_hdr *new_hop;
+ struct ipv6_txoptions *txopts = txopt_get(inet6_sk(sk));
+
+ if (!txopts || !txopts->hopopt)
+ goto done;
+
+ if (calipso_opt_del(txopts->hopopt, &new_hop))
+ goto done;
+
+ calipso_opt_update(sk, new_hop);
+ kfree(new_hop);
+
+done:
+ txopt_put(txopts);
+}
+
static const struct netlbl_calipso_ops ops = {
.doi_add = calipso_doi_add,
.doi_free = calipso_doi_free,
@@ -304,6 +896,9 @@ static const struct netlbl_calipso_ops ops = {
.doi_getdef = calipso_doi_getdef,
.doi_putdef = calipso_doi_putdef,
.doi_walk = calipso_doi_walk,
+ .sock_getattr = calipso_sock_getattr,
+ .sock_setattr = calipso_sock_setattr,
+ .sock_delattr = calipso_sock_delattr,
};
/**
@@ -98,7 +98,6 @@ int ip6_ra_control(struct sock *sk, int sel)
return 0;
}
-static
struct ipv6_txoptions *ipv6_update_options(struct sock *sk,
struct ipv6_txoptions *opt)
{
@@ -5,6 +5,7 @@
config NETLABEL
bool "NetLabel subsystem support"
depends on SECURITY
+ select CRC_CCITT if IPV6
default n
---help---
NetLabel provides support for explicit network packet labeling
@@ -514,3 +514,67 @@ int calipso_doi_walk(u32 *skip_cnt,
ret_val = ops->doi_walk(skip_cnt, callback, cb_arg);
return ret_val;
}
+
+/**
+ * calipso_sock_getattr - Get the security attributes from a sock
+ * @sk: the sock
+ * @secattr: the security attributes
+ *
+ * Description:
+ * Query @sk to see if there is a CALIPSO option attached to the sock and if
+ * there is return the CALIPSO security attributes in @secattr. This function
+ * requires that @sk be locked, or privately held, but it does not do any
+ * locking itself. Returns zero on success and negative values on failure.
+ *
+ */
+int calipso_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr)
+{
+ int ret_val = -ENOMSG;
+ const struct netlbl_calipso_ops *ops = netlbl_calipso_ops_get();
+
+ if (ops)
+ ret_val = ops->sock_getattr(sk, secattr);
+ return ret_val;
+}
+
+/**
+ * calipso_sock_setattr - Add a CALIPSO option to a socket
+ * @sk: the socket
+ * @doi_def: the CALIPSO DOI to use
+ * @secattr: the specific security attributes of the socket
+ *
+ * Description:
+ * Set the CALIPSO option on the given socket using the DOI definition and
+ * security attributes passed to the function. This function requires
+ * exclusive access to @sk, which means it either needs to be in the
+ * process of being created or locked. Returns zero on success and negative
+ * values on failure.
+ *
+ */
+int calipso_sock_setattr(struct sock *sk,
+ const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr)
+{
+ int ret_val = -ENOMSG;
+ const struct netlbl_calipso_ops *ops = netlbl_calipso_ops_get();
+
+ if (ops)
+ ret_val = ops->sock_setattr(sk, doi_def, secattr);
+ return ret_val;
+}
+
+/**
+ * calipso_sock_delattr - Delete the CALIPSO option from a socket
+ * @sk: the socket
+ *
+ * Description:
+ * Removes the CALIPSO option from a socket, if present.
+ *
+ */
+void calipso_sock_delattr(struct sock *sk)
+{
+ const struct netlbl_calipso_ops *ops = netlbl_calipso_ops_get();
+
+ if (ops)
+ ops->sock_delattr(sk);
+}
@@ -128,5 +128,10 @@ void calipso_doi_putdef(struct calipso_doi *doi_def);
int calipso_doi_walk(u32 *skip_cnt,
int (*callback)(struct calipso_doi *doi_def, void *arg),
void *cb_arg);
+int calipso_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr);
+int calipso_sock_setattr(struct sock *sk,
+ const struct calipso_doi *doi_def,
+ const struct netlbl_lsm_secattr *secattr);
+void calipso_sock_delattr(struct sock *sk);
#endif
@@ -37,12 +37,14 @@
#include <net/ipv6.h>
#include <net/netlabel.h>
#include <net/cipso_ipv4.h>
+#include <net/calipso.h>
#include <asm/bug.h>
#include <linux/atomic.h>
#include "netlabel_domainhash.h"
#include "netlabel_unlabeled.h"
#include "netlabel_cipso_v4.h"
+#include "netlabel_calipso.h"
#include "netlabel_user.h"
#include "netlabel_mgmt.h"
#include "netlabel_addrlist.h"
@@ -521,6 +523,7 @@ int netlbl_catmap_walk(struct netlbl_lsm_catmap *catmap, u32 offset)
return -ENOENT;
}
+EXPORT_SYMBOL(netlbl_catmap_walk);
/**
* netlbl_catmap_walkrng - Find the end of a string of set bits
@@ -657,6 +660,7 @@ int netlbl_catmap_setbit(struct netlbl_lsm_catmap **catmap,
return 0;
}
+EXPORT_SYMBOL(netlbl_catmap_setbit);
/**
* netlbl_catmap_setrng - Set a range of bits in a LSM secattr catmap
@@ -871,9 +875,21 @@ int netlbl_sock_setattr(struct sock *sk,
break;
#if IS_ENABLED(CONFIG_IPV6)
case AF_INET6:
- /* since we don't support any IPv6 labeling protocols right
- * now we can optimize everything away until we do */
- ret_val = 0;
+ switch (dom_entry->def.type) {
+ case NETLBL_NLTYPE_ADDRSELECT:
+ ret_val = -EDESTADDRREQ;
+ break;
+ case NETLBL_NLTYPE_CALIPSO:
+ ret_val = calipso_sock_setattr(sk,
+ dom_entry->def.calipso,
+ secattr);
+ break;
+ case NETLBL_NLTYPE_UNLABELED:
+ ret_val = 0;
+ break;
+ default:
+ ret_val = -ENOENT;
+ }
break;
#endif /* IPv6 */
default:
@@ -896,7 +912,16 @@ socket_setattr_return:
*/
void netlbl_sock_delattr(struct sock *sk)
{
- cipso_v4_sock_delattr(sk);
+ switch (sk->sk_family) {
+ case AF_INET:
+ cipso_v4_sock_delattr(sk);
+ break;
+#if IS_ENABLED(CONFIG_IPV6)
+ case AF_INET6:
+ calipso_sock_delattr(sk);
+ break;
+#endif /* IPv6 */
+ }
}
/**
@@ -922,7 +947,7 @@ int netlbl_sock_getattr(struct sock *sk,
break;
#if IS_ENABLED(CONFIG_IPV6)
case AF_INET6:
- ret_val = -ENOMSG;
+ ret_val = calipso_sock_getattr(sk, secattr);
break;
#endif /* IPv6 */
default:
@@ -950,6 +975,9 @@ int netlbl_conn_setattr(struct sock *sk,
{
int ret_val;
struct sockaddr_in *addr4;
+#if IS_ENABLED(CONFIG_IPV6)
+ struct sockaddr_in6 *addr6;
+#endif
struct netlbl_dommap_def *entry;
rcu_read_lock();
@@ -970,7 +998,7 @@ int netlbl_conn_setattr(struct sock *sk,
case NETLBL_NLTYPE_UNLABELED:
/* just delete the protocols we support for right now
* but we could remove other protocols if needed */
- cipso_v4_sock_delattr(sk);
+ netlbl_sock_delattr(sk);
ret_val = 0;
break;
default:
@@ -979,9 +1007,27 @@ int netlbl_conn_setattr(struct sock *sk,
break;
#if IS_ENABLED(CONFIG_IPV6)
case AF_INET6:
- /* since we don't support any IPv6 labeling protocols right
- * now we can optimize everything away until we do */
- ret_val = 0;
+ addr6 = (struct sockaddr_in6 *)addr;
+ entry = netlbl_domhsh_getentry_af6(secattr->domain,
+ &addr6->sin6_addr);
+ if (entry == NULL) {
+ ret_val = -ENOENT;
+ goto conn_setattr_return;
+ }
+ switch (entry->type) {
+ case NETLBL_NLTYPE_CALIPSO:
+ ret_val = calipso_sock_setattr(sk,
+ entry->calipso, secattr);
+ break;
+ case NETLBL_NLTYPE_UNLABELED:
+ /* just delete the protocols we support for right now
+ * but we could remove other protocols if needed */
+ netlbl_sock_delattr(sk);
+ ret_val = 0;
+ break;
+ default:
+ ret_val = -ENOENT;
+ }
break;
#endif /* IPv6 */
default:
@@ -333,7 +333,7 @@ int selinux_netlbl_socket_post_create(struct sock *sk, u16 family)
struct sk_security_struct *sksec = sk->sk_security;
struct netlbl_lsm_secattr *secattr;
- if (family != PF_INET)
+ if (family != PF_INET && family != PF_INET6)
return 0;
secattr = selinux_netlbl_sock_genattr(sk);
CALIPSO is a hop-by-hop IPv6 option. A lot of this patch is based on the equivalent CISPO code. The main difference is due to manipulating the options in the hop-by-hop header. Signed-off-by: Huw Davies <huw@codeweavers.com> --- include/net/ipv6.h | 2 + include/net/netlabel.h | 9 + include/uapi/linux/in6.h | 1 + net/ipv6/calipso.c | 595 ++++++++++++++++++++++++++++++++++++++++ net/ipv6/ipv6_sockglue.c | 1 - net/netlabel/Kconfig | 1 + net/netlabel/netlabel_calipso.c | 64 +++++ net/netlabel/netlabel_calipso.h | 5 + net/netlabel/netlabel_kapi.c | 64 ++++- security/selinux/netlabel.c | 2 +- 10 files changed, 733 insertions(+), 11 deletions(-)