| Message ID | 1455455317-17043-1-git-send-email-linus.walleij@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Sun, Feb 14, 2016 at 02:08:37PM +0100, Linus Walleij wrote: > This adds fairly standard device tree bindings for the STMPE > PWM found in STMPE24xx multi-purpose expanders. > > Cc: devicetree@vger.kernel.org > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt > > diff --git a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt > new file mode 100644 > index 000000000000..c8b53f39ae31 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt > @@ -0,0 +1,18 @@ > +== ST STMPE PWM controller == > + > +This is a PWM block embedded in the ST Microelectronics STMPE > +(ST Multi-Purpose Expander) chips. The PWM is registered as a > +subdevices of the STMPE MFD device. > + > +Required properties: > +- compatible: should be: > + - "st,stmpe-pwm" > +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of > + the cells format. > + > +Example: > + > +stmpe1_pwm0: stmpe_pwm { Shouldn't the node name simply be "pwm"? stmpe_pwm is kind of redundant given that this is to be embedded in an MFD node that will, presumably, be called stmpe. Thierry
diff --git a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt new file mode 100644 index 000000000000..c8b53f39ae31 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt @@ -0,0 +1,18 @@ +== ST STMPE PWM controller == + +This is a PWM block embedded in the ST Microelectronics STMPE +(ST Multi-Purpose Expander) chips. The PWM is registered as a +subdevices of the STMPE MFD device. + +Required properties: +- compatible: should be: + - "st,stmpe-pwm" +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. + +Example: + +stmpe1_pwm0: stmpe_pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; +};