diff mbox

[v4,1/5] mtd: atmel_nand: Support variable RB_EDGE interrupts

Message ID 1455098187-9442-2-git-send-email-romain.izard.pro@gmail.com
State Accepted
Headers show

Commit Message

Romain Izard Feb. 10, 2016, 9:56 a.m. UTC 
The NFC controller used to accelerate the NAND transfers on SAMA5 chips
can use either RB_EDGE0 or RB_EDGE3 as its ready/busy interrupt bit.

Use the controller's compatible string to select the correct bit.

For the binding:
Acked-by: Rob Herring <robh@kernel.org>

Reviewed-by: Wenyou Yang <Wenyou.yang@atmel.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
---
v4: collect tested-by and reviewed-by tags
v3: constify atmel_nand_nfc_caps structures
v2: use of_device_get_match_data
    rename struct atmel_nand_nfc_priv as atmel_nand_nfc_caps
    rename member rb_edge as rb_mask
    do not create defines for unused status bits

 .../devicetree/bindings/mtd/atmel-nand.txt         |  2 +-
 drivers/mtd/nand/atmel_nand.c                      | 35 +++++++++++++++++-----
 drivers/mtd/nand/atmel_nand_nfc.h                  |  3 +-
 3 files changed, 30 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 7d4c8eb775a5..89b0db9801b0 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -34,7 +34,7 @@  Optional properties:
 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
 - Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
   - Required properties:
-    - compatible : "atmel,sama5d3-nfc".
+    - compatible : "atmel,sama5d3-nfc" or "atmel,sama5d4-nfc".
     - reg : should specify the address and size used for NFC command registers,
             NFC registers and NFC Sram. NFC Sram address and size can be absent
             if don't want to use it.
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index affe7a7e9ad7..600c77cb70ef 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -67,6 +67,10 @@  struct atmel_nand_caps {
 	bool pmecc_correct_erase_page;
 };
 
+struct atmel_nand_nfc_caps {
+	uint32_t rb_mask;
+};
+
 /* oob layout for large page size
  * bad block info is on bytes 0 and 1
  * the bytes have to be consecutives to avoid
@@ -111,6 +115,7 @@  struct atmel_nfc {
 	/* Point to the sram bank which include readed data via NFC */
 	void			*data_in_sram;
 	bool			will_write_sram;
+	const struct atmel_nand_nfc_caps *caps;
 };
 static struct atmel_nfc	nand_nfc;
 
@@ -1675,9 +1680,9 @@  static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
 		nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
 		ret = IRQ_HANDLED;
 	}
-	if (pending & NFC_SR_RB_EDGE) {
+	if (pending & host->nfc->caps->rb_mask) {
 		complete(&host->nfc->comp_ready);
-		nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
+		nfc_writel(host->nfc->hsmc_regs, IDR, host->nfc->caps->rb_mask);
 		ret = IRQ_HANDLED;
 	}
 	if (pending & NFC_SR_CMD_DONE) {
@@ -1695,7 +1700,7 @@  static void nfc_prepare_interrupt(struct atmel_nand_host *host, u32 flag)
 	if (flag & NFC_SR_XFR_DONE)
 		init_completion(&host->nfc->comp_xfer_done);
 
-	if (flag & NFC_SR_RB_EDGE)
+	if (flag & host->nfc->caps->rb_mask)
 		init_completion(&host->nfc->comp_ready);
 
 	if (flag & NFC_SR_CMD_DONE)
@@ -1713,7 +1718,7 @@  static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
 	if (flag & NFC_SR_XFR_DONE)
 		comp[index++] = &host->nfc->comp_xfer_done;
 
-	if (flag & NFC_SR_RB_EDGE)
+	if (flag & host->nfc->caps->rb_mask)
 		comp[index++] = &host->nfc->comp_ready;
 
 	if (flag & NFC_SR_CMD_DONE)
@@ -1781,7 +1786,7 @@  static int nfc_device_ready(struct mtd_info *mtd)
 		dev_err(host->dev, "Lost the interrupt flags: 0x%08x\n",
 				mask & status);
 
-	return status & NFC_SR_RB_EDGE;
+	return status & host->nfc->caps->rb_mask;
 }
 
 static void nfc_select_chip(struct mtd_info *mtd, int chip)
@@ -1954,8 +1959,8 @@  static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
 		}
 		/* fall through */
 	default:
-		nfc_prepare_interrupt(host, NFC_SR_RB_EDGE);
-		nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
+		nfc_prepare_interrupt(host, host->nfc->caps->rb_mask);
+		nfc_wait_interrupt(host, host->nfc->caps->rb_mask);
 	}
 }
 
@@ -2352,6 +2357,11 @@  static int atmel_nand_nfc_probe(struct platform_device *pdev)
 		}
 	}
 
+	nfc->caps = (const struct atmel_nand_nfc_caps *)
+		of_device_get_match_data(&pdev->dev);
+	if (NULL == nfc->caps)
+		return -ENODEV;
+
 	nfc_writel(nfc->hsmc_regs, IDR, 0xffffffff);
 	nfc_readl(nfc->hsmc_regs, SR);	/* clear the NFC_SR */
 
@@ -2380,8 +2390,17 @@  static int atmel_nand_nfc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct atmel_nand_nfc_caps sama5d3_nfc_caps = {
+	.rb_mask = NFC_SR_RB_EDGE0,
+};
+
+static const struct atmel_nand_nfc_caps sama5d4_nfc_caps = {
+	.rb_mask = NFC_SR_RB_EDGE3,
+};
+
 static const struct of_device_id atmel_nand_nfc_match[] = {
-	{ .compatible = "atmel,sama5d3-nfc" },
+	{ .compatible = "atmel,sama5d3-nfc", .data = &sama5d3_nfc_caps },
+	{ .compatible = "atmel,sama5d4-nfc", .data = &sama5d4_nfc_caps },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match);
diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h
index 4d5d26221a7e..0bbc1fa97dba 100644
--- a/drivers/mtd/nand/atmel_nand_nfc.h
+++ b/drivers/mtd/nand/atmel_nand_nfc.h
@@ -42,7 +42,8 @@ 
 #define		NFC_SR_UNDEF		(1 << 21)
 #define		NFC_SR_AWB		(1 << 22)
 #define		NFC_SR_ASE		(1 << 23)
-#define		NFC_SR_RB_EDGE		(1 << 24)
+#define		NFC_SR_RB_EDGE0		(1 << 24)
+#define		NFC_SR_RB_EDGE3		(1 << 27)
 
 #define ATMEL_HSMC_NFC_IER	0x0c
 #define ATMEL_HSMC_NFC_IDR	0x10