| Message ID | 1454952937-19428-7-git-send-email-helmut.buchsbaum@gmail.com |
|---|---|
| State | Superseded, archived |
| Delegated to: | David Miller |
| Headers | show |
Hello. On 02/08/2016 08:35 PM, Helmut Buchsbaum wrote: > Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> > --- > .../devicetree/bindings/net/micrel-ks8995.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt > > diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt > new file mode 100644 > index 0000000..7f11ca6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt > @@ -0,0 +1,20 @@ > +Micrel KS8995 SPI controlled Ethernet Switch families > + > +Required properties (according to spi-bus.txt): > +- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795" > + > +Optional properties: > +- reset-gpios : phandle of gpio that will be used to reset chip during probe > + > +Example: > + > +spi-master { > + ... > + ksz8795 { ePAPR tells to name the nodes generically, according to their function. > + compatible = "micrel,ksz8795"; > + > + reg = <0>; > + spi-max-frequency = <50000000>; > + reset-gpios = <&gpio0 46 1>; > + }; > +}; MBR, Sergei
On 02/08/2016 07:44 PM, Sergei Shtylyov wrote: > Hello. > > On 02/08/2016 08:35 PM, Helmut Buchsbaum wrote: > >> Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> >> --- >> .../devicetree/bindings/net/micrel-ks8995.txt | 20 >> ++++++++++++++++++++ >> 1 file changed, 20 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/net/micrel-ks8995.txt >> >> diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt >> b/Documentation/devicetree/bindings/net/micrel-ks8995.txt >> new file mode 100644 >> index 0000000..7f11ca6 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt >> @@ -0,0 +1,20 @@ >> +Micrel KS8995 SPI controlled Ethernet Switch families >> + >> +Required properties (according to spi-bus.txt): >> +- compatible: either "micrel,ks8995", "micrel,ksz8864" or >> "micrel,ksz8795" >> + >> +Optional properties: >> +- reset-gpios : phandle of gpio that will be used to reset chip >> during probe >> + >> +Example: >> + >> +spi-master { >> + ... >> + ksz8795 { > > ePAPR tells to name the nodes generically, according to their function. > >> + compatible = "micrel,ksz8795"; >> + >> + reg = <0>; >> + spi-max-frequency = <50000000>; >> + reset-gpios = <&gpio0 46 1>; >> + }; >> +}; > > MBR, Sergei > Hello Sergei, just to avoid any misunderstandings: you refer to ePAPR, ch. 2.2.1 Node Names. Your definitely right, I'll correct the naming in my example! Thanks, Helmut
On 2/9/2016 11:07 AM, Helmut Buchsbaum wrote: >>> Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> >>> --- >>> .../devicetree/bindings/net/micrel-ks8995.txt | 20 >>> ++++++++++++++++++++ >>> 1 file changed, 20 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/net/micrel-ks8995.txt >>> >>> diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt >>> b/Documentation/devicetree/bindings/net/micrel-ks8995.txt >>> new file mode 100644 >>> index 0000000..7f11ca6 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt >>> @@ -0,0 +1,20 @@ >>> +Micrel KS8995 SPI controlled Ethernet Switch families >>> + >>> +Required properties (according to spi-bus.txt): >>> +- compatible: either "micrel,ks8995", "micrel,ksz8864" or >>> "micrel,ksz8795" >>> + >>> +Optional properties: >>> +- reset-gpios : phandle of gpio that will be used to reset chip >>> during probe >>> + >>> +Example: >>> + >>> +spi-master { >>> + ... >>> + ksz8795 { >> >> ePAPR tells to name the nodes generically, according to their function. >> >>> + compatible = "micrel,ksz8795"; >>> + >>> + reg = <0>; >>> + spi-max-frequency = <50000000>; >>> + reset-gpios = <&gpio0 46 1>; >>> + }; >>> +}; >> >> MBR, Sergei >> > Hello Sergei, > > just to avoid any misunderstandings: you refer to ePAPR, ch. 2.2.1 Node Names. "2.2.2, Generic Names Recommendation", actually. :-) > Your definitely right, I'll correct the naming in my example! TIA. > Thanks, > Helmut MBR, Sergei
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt new file mode 100644 index 0000000..7f11ca6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt @@ -0,0 +1,20 @@ +Micrel KS8995 SPI controlled Ethernet Switch families + +Required properties (according to spi-bus.txt): +- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795" + +Optional properties: +- reset-gpios : phandle of gpio that will be used to reset chip during probe + +Example: + +spi-master { + ... + ksz8795 { + compatible = "micrel,ksz8795"; + + reg = <0>; + spi-max-frequency = <50000000>; + reset-gpios = <&gpio0 46 1>; + }; +};
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> --- .../devicetree/bindings/net/micrel-ks8995.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt